Removing some very old ebuilds

6 files changed, 0 insertions, 724 deletions

diff --git a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.31-r7.ebuild b/sys-apps/pcmcia-cs/pcmcia-cs-3.1.31-r7.ebuild
deleted file mode 100644
index 9e34c89f85f0..000000000000
--- a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.31-r7.ebuild
+++ /dev/null
@@ -1,111 +0,0 @@
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcmcia-cs/pcmcia-cs-3.1.31-r7.ebuild,v 1.7 2002/08/01 11:40:16 seemant Exp $
-
-# This ebuild installs ${FILESDIR}/hermes.conf, which you can get from
-# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/hermes.conf
-
-S=${WORKDIR}/${P}
-DESCRIPTION="PCMCIA tools for Linux"
-SRC_URI="mirror://sourceforge/pcmcia-cs/${P}.tar.gz"
-HOMEPAGE="http://pcmcia-cs.sourceforge.net"
-KEYWORDS="x86"
-SLOT="0"
-DEPEND="sys-kernel/linux-headers"
-RDEPEND=""
-LICENSE="GPL-2"
-
-# Note: To use this ebuild, you should have the usr/src/linux symlink to 
-# the kernel directory that pcmcia-cs should use for configuration.
-
-src_unpack() {
-	unpack ${A}
-	cd ${S}
-	cp Configure Configure.orig
-	sed -e 's:usr/man:usr/share/man:g' Configure.orig > Configure
-	#man pages will now install into /usr/share/man
-}
-
-src_compile() {
-	local myconf
-	if [ -n "`use trusted`" ] ; then
-		myconf="--trust"
-	else
-		myconf="--notrust"
-	fi
-
-	if [ -n "`use apm`" ] ; then
-		myconf="$myconf --apm"
-	else
-		myconf="$myconf --noapm"
-	fi
-
-	if [ -n "`use pnp`" ] ; then
-		myconf="$myconf --pnp"
-	else
-		myconf="$myconf --nopnp"
-	fi
-	
-	if [ -n "`use nocardbus`" ] ; then
-		myconf="$myconf --nocardbus"
-	else
-		myconf="$myconf --cardbus"
-	fi
-
-	echo $myconf
-	#use $CFLAGS for user tools, but standard kernel optimizations for the kernel modules (for compatibility)
-	./Configure -n \
-		--target=${D} \
-		--srctree \
-		--kernel=/usr/src/linux \
-		--arch="i386" \
-		--uflags="$CFLAGS" \
-		--kflags="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer" \
-		$myconf || die "failed configuring"
-	# nopnp and noapm are important, because without them the pcmcia-cs 
-	# tools will require a kernel with ISA PnP and/or APM support, 
-	# which cannot be guaranteed.  We need to make sure the tools 
-	# work *all* the time, not just some of the time.
-	
-	# The --srctree option tells pcmcia-cs to configure for the kernel in /usr/src/linux
-	# rather than the currently-running kernel.  It's Gentoo Linux policy to configure for
-	# the kernel in /usr/src/linux
-	emake all || die "failed compiling"
-}
-
-src_install () {
-	make PREFIX=${D} install || die "failed installing"
-	cd ${D}
-	rm -rf etc/rc*.d
-	# remove X util if USE X isn't set
-	# this is simply much easier than patching configure or the makefiles
-	# not to build them in the first place
-	use X || rm -rf usr/X11R6
-	# todo: if they are nstalled, move them to /usr
-		
-	insinto /etc/conf.d
-	newins ${FILESDIR}/pcmcia.conf pcmcia
-
-	insinto /etc/pcmcia
-	doins ${FILESDIR}/network
-
-	# install our own init script
-	exeinto /etc/init.d
-	newexe ${FILESDIR}/pcmcia.rc6 pcmcia
-	if [ -z "`use build`" ]
-	then
-		cd ${S}
-		# install docs
-		dodoc BUGS CHANGES COPYING LICENSE MAINTAINERS README \
-			README-2.4 SUPPORTED.CARDS doc/*
-	else
-		rm -rf ${D}/usr/share/man
-	fi
-	rm -f ${D}/etc/modules.conf
-	rm -rf ${D}/var/lib/pcmcia
-}
-
-src_postinst() {
-	einfo "To avail yourself of the pcmcia-cs drivers, you have to disable the PCMCIA support in the kernel."
-	einfo "(Otherwise, you might experience CardServices version mismatch errors)"
-}
diff --git a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r3.ebuild b/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r3.ebuild
deleted file mode 100644
index 06f954de5904..000000000000
--- a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r3.ebuild
+++ /dev/null
@@ -1,110 +0,0 @@
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r3.ebuild,v 1.8 2002/08/01 11:40:16 seemant Exp $
-
-# This ebuild installs ${FILESDIR}/hermes.conf, which you can get from
-# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/hermes.conf
-
-S=${WORKDIR}/${P}
-DESCRIPTION="PCMCIA tools for Linux"
-SRC_URI="mirror://sourceforge/pcmcia-cs/${P}.tar.gz"
-HOMEPAGE="http://pcmcia-cs.sourceforge.net"
-KEYWORDS="x86"
-SLOT="0"
-DEPEND="sys-kernel/linux-headers"
-RDEPEND=""
-LICENSE="GPL-2"
-
-# Note: To use this ebuild, you should have the usr/src/linux symlink to 
-# the kernel directory that pcmcia-cs should use for configuration.
-
-src_unpack() {
-	unpack ${A}
-	cd ${S}
-	cp Configure Configure.orig
-	sed -e 's:usr/man:usr/share/man:g' Configure.orig > Configure
-	#man pages will now install into /usr/share/man
-}
-
-src_compile() {
-	local myconf
-	if [ -n "`use trusted`" ] ; then
-		myconf="--trust"
-	else
-		myconf="--notrust"
-	fi
-
-	if [ -n "`use apm`" ] ; then
-		myconf="$myconf --apm"
-	else
-		myconf="$myconf --noapm"
-	fi
-
-	if [ -n "`use pnp`" ] ; then
-		myconf="$myconf --pnp"
-	else
-		myconf="$myconf --nopnp"
-	fi
-	
-	if [ -n "`use nocardbus`" ] ; then
-		myconf="$myconf --nocardbus"
-	else
-		myconf="$myconf --cardbus"
-	fi
-
-	#use $CFLAGS for user tools, but standard kernel optimizations for the kernel modules (for compatibility)
-	./Configure -n \
-		--target=${D} \
-		--srctree \
-		--kernel=/usr/src/linux \
-		--arch="i386" \
-		--uflags="$CFLAGS" \
-		--kflags="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer" \
-		$myconf || die "failed configuring"
-	# nopnp and noapm are important, because without them the pcmcia-cs 
-	# tools will require a kernel with ISA PnP and/or APM support, 
-	# which cannot be guaranteed.  We need to make sure the tools 
-	# work *all* the time, not just some of the time.
-	
-	# The --srctree option tells pcmcia-cs to configure for the kernel in /usr/src/linux
-	# rather than the currently-running kernel.  It's Gentoo Linux policy to configure for
-	# the kernel in /usr/src/linux
-	emake all || die "failed compiling"
-}
-
-src_install () {
-	make PREFIX=${D} install || die "failed installing"
-	cd ${D}
-	rm -rf etc/rc*.d
-	# remove X
-	# this is simply much easier than patching configure or the makefiles
-	# not to build them in the first place
-	rm -rf usr/X11R6
-	# todo: if they are nstalled, move them to /usr
-		
-	insinto /etc/conf.d
-	newins ${FILESDIR}/pcmcia.conf pcmcia
-
-	exeinto /etc/pcmcia
-	doexe ${FILESDIR}/network
-
-	# install our own init script
-	exeinto /etc/init.d
-	newexe ${FILESDIR}/pcmcia.rc6 pcmcia
-	if [ -z "`use build`" ]
-	then
-		cd ${S}
-		# install docs
-		dodoc BUGS CHANGES COPYING LICENSE MAINTAINERS README \
-			README-2.4 SUPPORTED.CARDS doc/*
-	else
-		rm -rf ${D}/usr/share/man
-	fi
-	rm -f ${D}/etc/modules.conf
-	rm -rf ${D}/var/lib/pcmcia
-}
-
-src_postinst() {
-	einfo "To avail yourself of the pcmcia-cs drivers, you have to disable the PCMCIA support in the kernel."
-	einfo "(Otherwise, you might experience CardServices version mismatch errors)"
-}
diff --git a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r4.ebuild b/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r4.ebuild
deleted file mode 100644
index 0c48e5d73a06..000000000000
--- a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r4.ebuild
+++ /dev/null
@@ -1,115 +0,0 @@
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcmcia-cs/pcmcia-cs-3.1.33-r4.ebuild,v 1.6 2002/08/01 11:40:16 seemant Exp $
-
-# This ebuild installs ${FILESDIR}/hermes.conf, which you can get from
-# http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/hermes.conf
-
-S=${WORKDIR}/${P}
-DESCRIPTION="PCMCIA tools for Linux"
-SRC_URI="mirror://sourceforge/pcmcia-cs/${P}.tar.gz"
-#	http://ozlabs.org/people/dgibson/dldwd/orinoco-0.11a.tar.gz"
-HOMEPAGE="http://pcmcia-cs.sourceforge.net"
-KEYWORDS="x86"
-SLOT="0"
-DEPEND="sys-kernel/linux-headers"
-RDEPEND=""
-LICENSE="GPL-2"
-
-# Note: To use this ebuild, you should have the usr/src/linux symlink to 
-# the kernel directory that pcmcia-cs should use for configuration.
-
-#src_unpack() {
-#	unpack ${P}.tar.gz
-#	unpack orinoco-0.11a.tar.gz
-#	cd ${S}
-#	mv ../orinoco-0.11a/hermes*.{c,h} \
-#		../orinoco-0.11a/orinoco*.{c,h} \
-#		../orinoco-0.11a/ieee802_11.h wireless/
-#	cp Configure Configure.orig
-#	sed -e 's:usr/man:usr/share/man:g' Configure.orig > Configure
-#	#man pages will now install into /usr/share/man
-#}
-
-src_compile() {
-	local myconf
-	if [ -n "`use trusted`" ] ; then
-		myconf="--trust"
-	else
-		myconf="--notrust"
-	fi
-
-	if [ -n "`use apm`" ] ; then
-		myconf="$myconf --apm"
-	else
-		myconf="$myconf --noapm"
-	fi
-
-	if [ -n "`use pnp`" ] ; then
-		myconf="$myconf --pnp"
-	else
-		myconf="$myconf --nopnp"
-	fi
-	
-	if [ -n "`use nocardbus`" ] ; then
-		myconf="$myconf --nocardbus"
-	else
-		myconf="$myconf --cardbus"
-	fi
-
-	#use $CFLAGS for user tools, but standard kernel optimizations for the kernel modules (for compatibility)
-	./Configure -n \
-		--target=${D} \
-		--srctree \
-		--kernel=/usr/src/linux \
-		--arch="i386" \
-		--uflags="$CFLAGS" \
-		--kflags="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer" \
-		$myconf || die "failed configuring"
-	# nopnp and noapm are important, because without them the pcmcia-cs 
-	# tools will require a kernel with ISA PnP and/or APM support, 
-	# which cannot be guaranteed.  We need to make sure the tools 
-	# work *all* the time, not just some of the time.
-	
-	# The --srctree option tells pcmcia-cs to configure for the kernel in /usr/src/linux
-	# rather than the currently-running kernel.  It's Gentoo Linux policy to configure for
-	# the kernel in /usr/src/linux
-	emake all || die "failed compiling"
-}
-
-src_install () {
-	make PREFIX=${D} install || die "failed installing"
-	cd ${D}
-	rm -rf etc/rc*.d
-	# remove X
-	# this is simply much easier than patching configure or the makefiles
-	# not to build them in the first place
-	rm -rf usr/X11R6
-	# todo: if they are nstalled, move them to /usr
-		
-	insinto /etc/conf.d
-	newins ${FILESDIR}/pcmcia.conf pcmcia
-
-	exeinto /etc/pcmcia
-#	doexe ${FILESDIR}/network
-
-	# install our own init script
-	exeinto /etc/init.d
-	newexe ${FILESDIR}/pcmcia.rc6 pcmcia
-	if [ -z "`use build`" ]
-	then
-		cd ${S}
-		# install docs
-		dodoc BUGS CHANGES COPYING LICENSE MAINTAINERS README \
-			README-2.4 SUPPORTED.CARDS doc/*
-	else
-		rm -rf ${D}/usr/share/man
-	fi
-	rm -f ${D}/etc/modules.conf
-	rm -rf ${D}/var/lib/pcmcia
-}
-
-src_postinst() {
-	einfo "To avail yourself of the pcmcia-cs drivers, you have to disable the PCMCIA support in the kernel."
-	einfo "(Otherwise, you might experience CardServices version mismatch errors)"
-}
diff --git a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r3.ebuild b/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r3.ebuild
deleted file mode 100644
index becf43fa13e5..000000000000
--- a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r3.ebuild
+++ /dev/null
@@ -1,123 +0,0 @@
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r3.ebuild,v 1.2 2002/07/14 19:20:19 aliz Exp $
-
-S=${WORKDIR}/${P}
-DESCRIPTION="PCMCIA tools for Linux"
-SRC_URI="mirror://sourceforge/pcmcia-cs/${P}.tar.gz"
-
-HOMEPAGE="http://pcmcia-cs.sourceforge.net"
-KEYWORDS="x86"
-DEPEND="sys-kernel/linux-headers"
-RDEPEND=""
-SLOT="0"
-LICENSE="GPL"
-
-# check arch for configure
-if [ ${ARCH} = "x86" ] ; then
-	MY_ARCH="i386"
-else
-	MY_ARCH="ppc"
-fi
-
-# Note: To use this ebuild, you should have the usr/src/linux symlink to 
-# the kernel directory that pcmcia-cs should use for configuration.
-
-src_unpack() {
-	unpack ${P}.tar.gz
-#	patch -p0 < ${FILESDIR}/gentoo-${P}.patch
-
-	cd ${S}
-	cp Configure Configure.orig
-	sed -e 's:usr/man:usr/share/man:g' Configure.orig > Configure
-	#man pages will now install into /usr/share/man
-}
-
-src_compile() {
-	local myconf
-	if [ -n "`use trusted`" ] ; then
-		myconf="--trust"
-	else
-		myconf="--notrust"
-	fi
-
-	if [ -n "`use apm`" ] ; then
-		myconf="$myconf --apm"
-	else
-		myconf="$myconf --noapm"
-	fi
-
-	if [ -n "`use pnp`" ] ; then
-		myconf="$myconf --pnp"
-	else
-		myconf="$myconf --nopnp"
-	fi
-	
-	if [ -n "`use nocardbus`" ] ; then
-		myconf="$myconf --nocardbus"
-	else
-		myconf="$myconf --cardbus"
-	fi
-
-	#use $CFLAGS for user tools, but standard kernel optimizations for the kernel modules (for compatibility)
-	./Configure -n \
-		--target=${D} \
-		--srctree \
-		--kernel=/usr/src/linux \
-		--arch="${MY_ARCH}" \
-		--uflags="$CFLAGS" \
-		--kflags="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer" \
-		$myconf || die "failed configuring"
-	# nopnp and noapm are important, because without them the pcmcia-cs 
-	# tools will require a kernel with ISA PnP and/or APM support, 
-	# which cannot be guaranteed.  We need to make sure the tools 
-	# work *all* the time, not just some of the time.
-	
-	# The --srctree option tells pcmcia-cs to configure for the kernel in /usr/src/linux
-	# rather than the currently-running kernel.  It's Gentoo Linux policy to configure for
-	# the kernel in /usr/src/linux
-	emake all || die "failed compiling"
-}
-
-src_install () {
-	make PREFIX=${D} install || die "failed installing"
-	cd ${D}
-	rm -rf etc/rc*.d
-	# remove X
-	# this is simply much easier than patching configure or the makefiles
-	# not to build them in the first place
-	rm -rf usr/X11R6
-	# todo: if they are nstalled, move them to /usr
-		
-	insinto /etc/conf.d
-	newins ${FILESDIR}/pcmcia.conf pcmcia
-
-	exeinto /etc/pcmcia
-	doexe ${FILESDIR}/network
-
-	# install our own init script
-	exeinto /etc/init.d
-	newexe ${FILESDIR}/pcmcia.rc6 pcmcia
-	if [ -z "`use build`" ]
-	then
-		cd ${S}
-		# install docs
-		dodoc BUGS CHANGES COPYING LICENSE MAINTAINERS README \
-			README-2.4 SUPPORTED.CARDS doc/*
-	else
-		rm -rf ${D}/usr/share/man
-	fi
-	rm -f ${D}/etc/modules.conf
-	rm -rf ${D}/var/lib/pcmcia
-
-	# if on ppc set the ppc revised config.opts
-	if [ ${ARCH} = "ppc" ] ; then
-		insinto /etc/pcmcia
-		newins ${FILESDIR}/ppc.config.opts config.opts
-	fi	
-}
-
-src_postinst() {
-	einfo "To avail yourself of the pcmcia-cs drivers, you have to disable the PCMCIA support in the kernel."
-	einfo "(Otherwise, you might experience CardServices version mismatch errors)"
-}
diff --git a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r5.ebuild b/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r5.ebuild
deleted file mode 100644
index 3950a14f6be0..000000000000
--- a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r5.ebuild
+++ /dev/null
@@ -1,128 +0,0 @@
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcmcia-cs/pcmcia-cs-3.1.34-r5.ebuild,v 1.2 2002/07/14 19:20:19 aliz Exp $
-
-S=${WORKDIR}/${P}
-DESCRIPTION="PCMCIA tools for Linux"
-SRC_URI="mirror://sourceforge/pcmcia-cs/${P}.tar.gz
-	http://ozlabs.org/people/dgibson/dldwd/orinoco-0.12a.tar.gz"
-
-HOMEPAGE="http://pcmcia-cs.sourceforge.net"
-KEYWORDS="x86"
-DEPEND="sys-kernel/linux-headers"
-RDEPEND=""
-SLOT="0"
-LICENSE="GPL"
-
-# check arch for configure
-if [ ${ARCH} = "x86" ] ; then
-	MY_ARCH="i386"
-else
-	MY_ARCH="ppc"
-fi
-
-# Note: To use this ebuild, you should have the usr/src/linux symlink to 
-# the kernel directory that pcmcia-cs should use for configuration.
-
-src_unpack() {
-	unpack ${P}.tar.gz
-#	patch -p0 < ${FILESDIR}/gentoo-${P}.patch
-
-	unpack orinoco-0.12a.tar.gz
-	cd ${S}
-	mv ../orinoco-0.12a/hermes*.{c,h} \
-		../orinoco-0.12a/orinoco*.{c,h} \
-		../orinoco-0.12a/ieee802_11.h wireless/
-	cp Configure Configure.orig
-	sed -e 's:usr/man:usr/share/man:g' Configure.orig > Configure
-	#man pages will now install into /usr/share/man
-}
-
-src_compile() {
-	local myconf
-	if [ -n "`use trusted`" ] ; then
-		myconf="--trust"
-	else
-		myconf="--notrust"
-	fi
-
-	if [ -n "`use apm`" ] ; then
-		myconf="$myconf --apm"
-	else
-		myconf="$myconf --noapm"
-	fi
-
-	if [ -n "`use pnp`" ] ; then
-		myconf="$myconf --pnp"
-	else
-		myconf="$myconf --nopnp"
-	fi
-	
-	if [ -n "`use nocardbus`" ] ; then
-		myconf="$myconf --nocardbus"
-	else
-		myconf="$myconf --cardbus"
-	fi
-
-	#use $CFLAGS for user tools, but standard kernel optimizations for the kernel modules (for compatibility)
-	./Configure -n \
-		--target=${D} \
-		--srctree \
-		--kernel=/usr/src/linux \
-		--arch="${MY_ARCH}" \
-		--uflags="$CFLAGS" \
-		--kflags="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer" \
-		$myconf || die "failed configuring"
-	# nopnp and noapm are important, because without them the pcmcia-cs 
-	# tools will require a kernel with ISA PnP and/or APM support, 
-	# which cannot be guaranteed.  We need to make sure the tools 
-	# work *all* the time, not just some of the time.
-	
-	# The --srctree option tells pcmcia-cs to configure for the kernel in /usr/src/linux
-	# rather than the currently-running kernel.  It's Gentoo Linux policy to configure for
-	# the kernel in /usr/src/linux
-	emake all || die "failed compiling"
-}
-
-src_install () {
-	make PREFIX=${D} install || die "failed installing"
-	cd ${D}
-	rm -rf etc/rc*.d
-	# remove X
-	# this is simply much easier than patching configure or the makefiles
-	# not to build them in the first place
-	rm -rf usr/X11R6
-	# todo: if they are nstalled, move them to /usr
-		
-	insinto /etc/conf.d
-	newins ${FILESDIR}/pcmcia.conf pcmcia
-
-	exeinto /etc/pcmcia
-	doexe ${FILESDIR}/network
-
-	# install our own init script
-	exeinto /etc/init.d
-	newexe ${FILESDIR}/pcmcia.rc6 pcmcia
-	if [ -z "`use build`" ]
-	then
-		cd ${S}
-		# install docs
-		dodoc BUGS CHANGES COPYING LICENSE MAINTAINERS README \
-			README-2.4 SUPPORTED.CARDS doc/*
-	else
-		rm -rf ${D}/usr/share/man
-	fi
-	rm -f ${D}/etc/modules.conf
-	rm -rf ${D}/var/lib/pcmcia
-
-	# if on ppc set the ppc revised config.opts
-	if [ ${ARCH} = "ppc" ] ; then
-		insinto /etc/pcmcia
-		newins ${FILESDIR}/ppc.config.opts config.opts
-	fi	
-}
-
-src_postinst() {
-	einfo "To avail yourself of the pcmcia-cs drivers, you have to disable the PCMCIA support in the kernel."
-	einfo "(Otherwise, you might experience CardServices version mismatch errors)"
-}
diff --git a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.35_beta2.ebuild b/sys-apps/pcmcia-cs/pcmcia-cs-3.1.35_beta2.ebuild
deleted file mode 100644
index 0ce5de91b513..000000000000
--- a/sys-apps/pcmcia-cs/pcmcia-cs-3.1.35_beta2.ebuild
+++ /dev/null
@@ -1,137 +0,0 @@
-# Copyright 1999-2002 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/pcmcia-cs/pcmcia-cs-3.1.35_beta2.ebuild,v 1.1 2002/07/12 10:31:23 cardoe Exp $
-
-S=${WORKDIR}/pcmcia-cs-3.1.35
-DESCRIPTION="PCMCIA tools for Linux"
-SRC_URI="http://pcmcia-cs.sourceforge.net/ftp/NEW/pcmcia-cs.02-Jul-02.tar.gz
-	http://ozlabs.org/people/dgibson/dldwd/orinoco-0.12b.tar.gz"
-
-HOMEPAGE="http://pcmcia-cs.sourceforge.net"
-DEPEND="sys-kernel/linux-headers"
-RDEPEND=""
-SLOT="0"
-LICENSE="GPL"
-KEYWORDS="x86"
-
-# check arch for configure
-if [ ${ARCH} = "x86" ] ; then
-	MY_ARCH="i386"
-else
-	MY_ARCH="ppc"
-fi
-
-# Note: To use this ebuild, you should have the usr/src/linux symlink to 
-# the kernel directory that pcmcia-cs should use for configuration.
-
-src_unpack() {
-	unpack pcmcia-cs.02-Jul-02.tar.gz
-#	patch -p0 < ${FILESDIR}/gentoo-${P}.patch
-
-	unpack orinoco-0.12b.tar.gz
-	cd ${S}
-	mv ../orinoco-0.12b/hermes*.{c,h} \
-		../orinoco-0.12b/orinoco*.{c,h} \
-		../orinoco-0.12b/ieee802_11.h wireless/
-	cp Configure Configure.orig
-	sed -e 's:usr/man:usr/share/man:g' Configure.orig > Configure
-	#man pages will now install into /usr/share/man
-
-	cd ${S}
-        ### As per the SourceForge web site reqs and bug #3400
-        # We'll replace all ide_cs with ide-cs
-        cp etc/config etc/config.orig
-        sed -e 's:ide_cs:ide-cs:g' etc/config.orig > etc/config
-        rm -f etc/config.orig
-
-
-}
-
-src_compile() {
-	local myconf
-	if [ -n "`use trusted`" ] ; then
-		myconf="--trust"
-	else
-		myconf="--notrust"
-	fi
-
-	if [ -n "`use apm`" ] ; then
-		myconf="$myconf --apm"
-	else
-		myconf="$myconf --noapm"
-	fi
-
-	if [ -n "`use pnp`" ] ; then
-		myconf="$myconf --pnp"
-	else
-		myconf="$myconf --nopnp"
-	fi
-	
-	if [ -n "`use nocardbus`" ] ; then
-		myconf="$myconf --nocardbus"
-	else
-		myconf="$myconf --cardbus"
-	fi
-
-	#use $CFLAGS for user tools, but standard kernel optimizations for the kernel modules (for compatibility)
-	./Configure -n \
-		--target=${D} \
-		--srctree \
-		--kernel=/usr/src/linux \
-		--arch="${MY_ARCH}" \
-		--uflags="$CFLAGS" \
-		--kflags="-Wall -Wstrict-prototypes -O2 -fomit-frame-pointer" \
-		$myconf || die "failed configuring"
-	# nopnp and noapm are important, because without them the pcmcia-cs 
-	# tools will require a kernel with ISA PnP and/or APM support, 
-	# which cannot be guaranteed.  We need to make sure the tools 
-	# work *all* the time, not just some of the time.
-	
-	# The --srctree option tells pcmcia-cs to configure for the kernel in /usr/src/linux
-	# rather than the currently-running kernel.  It's Gentoo Linux policy to configure for
-	# the kernel in /usr/src/linux
-	emake all || die "failed compiling"
-}
-
-src_install () {
-	make PREFIX=${D} install || die "failed installing"
-	cd ${D}
-	rm -rf etc/rc*.d
-	# remove X
-	# this is simply much easier than patching configure or the makefiles
-	# not to build them in the first place
-	rm -rf usr/X11R6
-	# todo: if they are nstalled, move them to /usr
-		
-	insinto /etc/conf.d
-	newins ${FILESDIR}/pcmcia.conf pcmcia
-
-	exeinto /etc/pcmcia
-	doexe ${FILESDIR}/network
-
-	# install our own init script
-	exeinto /etc/init.d
-	newexe ${FILESDIR}/pcmcia.rc6 pcmcia
-	if [ -z "`use build`" ]
-	then
-		cd ${S}
-		# install docs
-		dodoc BUGS CHANGES COPYING LICENSE MAINTAINERS README \
-			README-2.4 SUPPORTED.CARDS doc/*
-	else
-		rm -rf ${D}/usr/share/man
-	fi
-	rm -f ${D}/etc/modules.conf
-	rm -rf ${D}/var/lib/pcmcia
-
-	# if on ppc set the ppc revised config.opts
-	if [ ${ARCH} = "ppc" ] ; then
-		insinto /etc/pcmcia
-		newins ${FILESDIR}/ppc.config.opts config.opts
-	fi
-}
-
-src_postinst() {
-	einfo "To avail yourself of the pcmcia-cs drivers, you have to disable the PCMCIA support in the kernel."
-	einfo "(Otherwise, you might experience CardServices version mismatch errors)"
-}