Sorry i did not know about upper case is forbidden

6 files changed, 0 insertions, 1106 deletions

diff --git a/media-sound/terminatorX/ChangeLog b/media-sound/terminatorX/ChangeLog
deleted file mode 100644
index 508c86aa024e..000000000000
--- a/media-sound/terminatorX/ChangeLog
+++ /dev/null
@@ -1,9 +0,0 @@
-# ChangeLog for media-sound/terminatorX
-# Copyright 2000-2003 Gentoo Technologies, Inc.; Distributed under the GPL v2
-# $Header: /var/cvsroot/gentoo-x86/media-sound/terminatorX/ChangeLog,v 1.1 2003/06/25 10:41:17 torbenh Exp $
-
-*terminatorX-3.80 (25 Jun 2003)
-
-  25 Jun 2003; torbenh <torbenh@gentoo.org> Manifest terminatorX-3.80.ebuild files/terminatorX-3.80.GNOMEpresent.patch files/terminatorX-3.80.fixGnomeMakefile.patch :
-  Initial Version
-
diff --git a/media-sound/terminatorX/Manifest b/media-sound/terminatorX/Manifest
deleted file mode 100644
index deb11b508265..000000000000
--- a/media-sound/terminatorX/Manifest
+++ /dev/null
@@ -1,5 +0,0 @@
-MD5 ae1a65dbfda90cf38074e6315b52bfaf terminatorX-3.80.ebuild 2465
-MD5 86b35221dcf518a5a4ae22718c3014be ChangeLog 448
-MD5 8c382c7214153dabd8dacd6d75f2ad01 files/terminatorX-3.80.GNOMEpresent.patch 25091
-MD5 eb49735880ebb0f863fe1ca9e83a8ff9 files/digest-terminatorX-3.80 68
-MD5 a2074d5d27b3b2d3006703af2a500c3f files/terminatorX-3.80.fixGnomeMakefile.patch 1032
diff --git a/media-sound/terminatorX/files/digest-terminatorX-3.80 b/media-sound/terminatorX/files/digest-terminatorX-3.80
deleted file mode 100644
index 3028f20de52c..000000000000
--- a/media-sound/terminatorX/files/digest-terminatorX-3.80
+++ /dev/null
@@ -1 +0,0 @@
-MD5 04ad737a0b555ea869c27960088a7872 terminatorX-3.80.tar.gz 482974
diff --git a/media-sound/terminatorX/files/terminatorX-3.80.GNOMEpresent.patch b/media-sound/terminatorX/files/terminatorX-3.80.GNOMEpresent.patch
deleted file mode 100644
index d8c140ade488..000000000000
--- a/media-sound/terminatorX/files/terminatorX-3.80.GNOMEpresent.patch
+++ /dev/null
@@ -1,979 +0,0 @@
-diff -ru terminatorX-3.80-org/configure terminatorX-3.80/configure
---- terminatorX-3.80-org/configure	2003-04-17 00:27:42.000000000 +0200
-+++ terminatorX-3.80/configure	2003-04-26 19:56:25.000000000 +0200
-@@ -7223,6 +7223,8 @@
- fi
- 
- 
-+GNOMEpresent=fl
-+
- echo "$as_me:$LINENO: checking for GNOME" >&5
- echo $ECHO_N "checking for GNOME... $ECHO_C" >&6
- 	echo "$as_me:$LINENO: result: in progress" >&5
-@@ -7305,6 +7307,13 @@
- 			gnomedatadir=${datadir}
- 		fi
- 
-+   		echo "$as_me:$LINENO: result: Found GNOME - installing terminatorX.desktop." >&5
-+echo "${ECHO_T}Found GNOME - installing terminatorX.desktop." >&6
-+		OPTION_GNOME="yes"
-+    	else
-+   		echo "$as_me:$LINENO: result: GNOME not found." >&5
-+echo "${ECHO_T}GNOME not found." >&6
-+    	fi
- 
- 
- if test "$gnomepresent" = yes; then
-@@ -7315,13 +7324,6 @@
-   GNOMEpresent_FALSE=
- fi
- 
--   		echo "$as_me:$LINENO: result: Found GNOME - installing terminatorX.desktop." >&5
--echo "${ECHO_T}Found GNOME - installing terminatorX.desktop." >&6
--		OPTION_GNOME="yes"
--    	else
--   		echo "$as_me:$LINENO: result: GNOME not found." >&5
--echo "${ECHO_T}GNOME not found." >&6
--    	fi
- 
- 
- found_libxml=false
-diff -ru terminatorX-3.80-org/configure.in terminatorX-3.80/configure.in
---- terminatorX-3.80-org/configure.in	2003-03-31 20:36:26.000000000 +0200
-+++ terminatorX-3.80/configure.in	2003-04-26 19:56:16.000000000 +0200
-@@ -404,6 +404,8 @@
- dnl 	AC_DEFINE(USE_DGA2)
- dnl fi
- 
-+GNOMEpresent=fl
-+
- AC_MSG_CHECKING(for GNOME)
- 	AC_MSG_RESULT([in progress])
- 	AC_CHECK_PROG(gnomepresent, gnome-name-service, yes, no)
-@@ -415,12 +417,12 @@
- 			gnomedatadir=${datadir}
- 		fi
- 		AC_SUBST(gnomedatadir)
--		AM_CONDITIONAL(GNOMEpresent, test "$gnomepresent" = yes)
-    		AC_MSG_RESULT([Found GNOME - installing terminatorX.desktop.])
- 		OPTION_GNOME="yes"
-     	else
-    		AC_MSG_RESULT([GNOME not found.])
-     	fi
-+	AM_CONDITIONAL(GNOMEpresent, test "$gnomepresent" = yes)
- 
- 
- dnl Detecting libxml. Based on dia's test.
-diff -ru terminatorX-3.80-org/depcomp terminatorX-3.80/depcomp
---- terminatorX-3.80-org/depcomp	2003-02-21 00:31:32.000000000 +0100
-+++ terminatorX-3.80/depcomp	2003-03-26 20:29:58.000000000 +0100
-@@ -31,16 +31,7 @@
- fi
- # `libtool' can also be set to `yes' or `no'.
- 
--if test -z "$depfile"; then
--   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
--   dir=`echo "$object" | sed 's,/.*$,/,'`
--   if test "$dir" = "$object"; then
--      dir=
--   fi
--   # FIXME: should be _deps on DOS.
--   depfile="$dir.deps/$base"
--fi
--
-+depfile=${depfile-`echo "$object" | sed 's,\([^/]*\)$,.deps/\1,;s/\.\([^.]*\)$/.P\1/'`}
- tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
- 
- rm -f "$tmpdepfile"
-@@ -206,53 +197,18 @@
-   rm -f "$tmpdepfile"
-   ;;
- 
--icc)
--  # Must come before tru64.
--
--  # Intel's C compiler understands `-MD -MF file'.  However
--  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
--  # will fill foo.d with something like
--  #    foo.o: sub/foo.c
--  #    foo.o: sub/foo.h
--  # which is wrong.  We want:
--  #    sub/foo.o: sub/foo.c
--  #    sub/foo.o: sub/foo.h
--  #    sub/foo.c:
--  #    sub/foo.h:
--
--  "$@" -MD -MF "$tmpdepfile"
--  stat=$?
--  if test $stat -eq 0; then :
--  else
--    rm -f "$tmpdepfile"
--    exit $stat
--  fi
--  rm -f "$depfile"
--  # Each line is of the form `foo.o: dependent.h'.
--  # Do two passes, one to just change these to
--  # `$object: dependent.h' and one to simply `dependent.h:'.
--  sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
--  sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
--  rm -f "$tmpdepfile"
--  ;;
--
- tru64)
--   # The Tru64 compiler uses -MD to generate dependencies as a side
-+   # The Tru64 AIX compiler uses -MD to generate dependencies as a side
-    # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
--   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put 
-    # dependencies in `foo.d' instead, so we check for that too.
-    # Subdirectories are respected.
--   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
--   test "x$dir" = "x$object" && dir=
--   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
- 
-+   tmpdepfile1="$object.d"
-+   tmpdepfile2=`echo "$object" | sed -e 's/.o$/.d/'` 
-    if test "$libtool" = yes; then
--      tmpdepfile1="$dir.libs/$base.lo.d"
--      tmpdepfile2="$dir.libs/$base.d"
-       "$@" -Wc,-MD
-    else
--      tmpdepfile1="$dir$base.o.d"
--      tmpdepfile2="$dir$base.d"
-       "$@" -MD
-    fi
- 
-@@ -284,42 +240,34 @@
- 
- dashmstdout)
-   # Important note: in order to support this mode, a compiler *must*
--  # always write the proprocessed file to stdout, regardless of -o.
--  "$@" || exit $?
--
--  # Remove the call to Libtool.
--  if test "$libtool" = yes; then
--    while test $1 != '--mode=compile'; do
--      shift
--    done
--    shift
--  fi
--
--  # Remove `-o $object'.
--  IFS=" "
--  for arg
--  do
--    case $arg in
--    -o)
--      shift
--      ;;
--    $object)
--      shift
--      ;;
--    *)
--      set fnord "$@" "$arg"
--      shift # fnord
--      shift # $arg
-+  # always write the proprocessed file to stdout, regardless of -o,
-+  # because we must use -o when running libtool.
-+  test -z "$dashmflag" && dashmflag=-M
-+  ( IFS=" "
-+    case " $* " in
-+    *" --mode=compile "*) # this is libtool, let us make it quiet
-+      for arg
-+      do # cycle over the arguments
-+        case "$arg" in
-+	"--mode=compile")
-+	  # insert --quiet before "--mode=compile"
-+	  set fnord "$@" --quiet
-+	  shift # fnord
-+	  ;;
-+	esac
-+	set fnord "$@" "$arg"
-+	shift # fnord
-+	shift # "$arg"
-+      done
-       ;;
-     esac
--  done
--
--  test -z "$dashmflag" && dashmflag=-M
--  # Require at least two characters before searching for `:'
--  # in the target name.  This is to cope with DOS-style filenames:
--  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
--  "$@" $dashmflag |
--    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
-+    "$@" $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
-+  ) &
-+  proc=$!
-+  "$@"
-+  stat=$?
-+  wait "$proc"
-+  if test "$stat" != 0; then exit $stat; fi
-   rm -f "$depfile"
-   cat < "$tmpdepfile" > "$depfile"
-   tr ' ' '
-@@ -337,40 +285,36 @@
-   ;;
- 
- makedepend)
--  "$@" || exit $?
--  # Remove any Libtool call
--  if test "$libtool" = yes; then
--    while test $1 != '--mode=compile'; do
--      shift
--    done
--    shift
--  fi
-   # X makedepend
--  shift
--  cleared=no
--  for arg in "$@"; do
--    case $cleared in
--    no)
--      set ""; shift
--      cleared=yes ;;
--    esac
--    case "$arg" in
--    -D*|-I*)
--      set fnord "$@" "$arg"; shift ;;
--    # Strip any option that makedepend may not understand.  Remove
--    # the object too, otherwise makedepend will parse it as a source file.
--    -*|$object)
--      ;;
--    *)
--      set fnord "$@" "$arg"; shift ;;
--    esac
--  done
--  obj_suffix="`echo $object | sed 's/^.*\././'`"
--  touch "$tmpdepfile"
--  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-+  (
-+    shift
-+    cleared=no
-+    for arg in "$@"; do
-+      case $cleared in no)
-+        set ""; shift
-+	cleared=yes
-+      esac
-+      case "$arg" in
-+        -D*|-I*)
-+	  set fnord "$@" "$arg"; shift;;
-+	-*)
-+	  ;;
-+	*)
-+	  set fnord "$@" "$arg"; shift;;
-+      esac
-+    done
-+    obj_suffix="`echo $object | sed 's/^.*\././'`"
-+    touch "$tmpdepfile"
-+    ${MAKEDEPEND-makedepend} 2>/dev/null -o"$obj_suffix" -f"$tmpdepfile" "$@"
-+  ) &
-+  proc=$!
-+  "$@"
-+  stat=$?
-+  wait "$proc"
-+  if test "$stat" != 0; then exit $stat; fi
-   rm -f "$depfile"
-   cat < "$tmpdepfile" > "$depfile"
--  sed '1,2d' "$tmpdepfile" | tr ' ' '
-+  tail +3 "$tmpdepfile" | tr ' ' '
- ' | \
- ## Some versions of the HPUX 10.20 sed can't process this invocation
- ## correctly.  Breaking it into two sed invocations is a workaround.
-@@ -380,39 +324,35 @@
- 
- cpp)
-   # Important note: in order to support this mode, a compiler *must*
--  # always write the proprocessed file to stdout.
--  "$@" || exit $?
--
--  # Remove the call to Libtool.
--  if test "$libtool" = yes; then
--    while test $1 != '--mode=compile'; do
--      shift
--    done
--    shift
--  fi
--
--  # Remove `-o $object'.
--  IFS=" "
--  for arg
--  do
--    case $arg in
--    -o)
--      shift
--      ;;
--    $object)
--      shift
--      ;;
--    *)
--      set fnord "$@" "$arg"
--      shift # fnord
--      shift # $arg
-+  # always write the proprocessed file to stdout, regardless of -o,
-+  # because we must use -o when running libtool.
-+  ( IFS=" "
-+    case " $* " in
-+    *" --mode=compile "*)
-+      for arg
-+      do # cycle over the arguments
-+        case $arg in
-+	"--mode=compile")
-+	  # insert --quiet before "--mode=compile"
-+	  set fnord "$@" --quiet
-+	  shift # fnord
-+	  ;;
-+	esac
-+	set fnord "$@" "$arg"
-+	shift # fnord
-+	shift # "$arg"
-+      done
-       ;;
-     esac
--  done
--
--  "$@" -E |
-+    "$@" -E |
-     sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-     sed '$ s: \\$::' > "$tmpdepfile"
-+  ) &
-+  proc=$!
-+  "$@"
-+  stat=$?
-+  wait "$proc"
-+  if test "$stat" != 0; then exit $stat; fi
-   rm -f "$depfile"
-   echo "$object : \\" > "$depfile"
-   cat < "$tmpdepfile" >> "$depfile"
-@@ -424,25 +364,32 @@
-   # Important note: in order to support this mode, a compiler *must*
-   # always write the proprocessed file to stdout, regardless of -o,
-   # because we must use -o when running libtool.
--  "$@" || exit $?
--  IFS=" "
--  for arg
--  do
--    case "$arg" in
--    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
--	set fnord "$@"
--	shift
--	shift
--	;;
--    *)
-+  ( IFS=" "
-+    case " $* " in
-+    *" --mode=compile "*)
-+      for arg
-+      do # cycle over the arguments
-+        case $arg in
-+	"--mode=compile")
-+	  # insert --quiet before "--mode=compile"
-+	  set fnord "$@" --quiet
-+	  shift # fnord
-+	  ;;
-+	esac
- 	set fnord "$@" "$arg"
--	shift
--	shift
--	;;
-+	shift # fnord
-+	shift # "$arg"
-+      done
-+      ;;
-     esac
--  done
--  "$@" -E |
--  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-+    "$@" -E |
-+    sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-+  ) &
-+  proc=$!
-+  "$@"
-+  stat=$?
-+  wait "$proc"
-+  if test "$stat" != 0; then exit $stat; fi
-   rm -f "$depfile"
-   echo "$object : \\" > "$depfile"
-   . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-diff -ru terminatorX-3.80-org/install-sh terminatorX-3.80/install-sh
---- terminatorX-3.80-org/install-sh	2003-02-21 00:31:32.000000000 +0100
-+++ terminatorX-3.80/install-sh	2003-03-26 20:29:58.000000000 +0100
-@@ -56,7 +56,7 @@
- 
- while [ x"$1" != x ]; do
-     case $1 in
--	-c) instcmd=$cpprog
-+	-c) instcmd="$cpprog"
- 	    shift
- 	    continue;;
- 
-@@ -79,7 +79,7 @@
- 	    shift
- 	    continue;;
- 
--	-s) stripcmd=$stripprog
-+	-s) stripcmd="$stripprog"
- 	    shift
- 	    continue;;
- 
-@@ -106,132 +106,128 @@
- 
- if [ x"$src" = x ]
- then
--	echo "$0: no input file specified" >&2
-+	echo "install:	no input file specified"
- 	exit 1
- else
--	:
-+	true
- fi
- 
- if [ x"$dir_arg" != x ]; then
- 	dst=$src
- 	src=""
--
--	if [ -d "$dst" ]; then
-+	
-+	if [ -d $dst ]; then
- 		instcmd=:
- 		chmodcmd=""
- 	else
--		instcmd=$mkdirprog
-+		instcmd=mkdir
- 	fi
- else
- 
- # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
--# might cause directories to be created, which would be especially bad
-+# might cause directories to be created, which would be especially bad 
- # if $src (and thus $dsttmp) contains '*'.
- 
--	if [ -f "$src" ] || [ -d "$src" ]
-+	if [ -f $src -o -d $src ]
- 	then
--		:
-+		true
- 	else
--		echo "$0: $src does not exist" >&2
-+		echo "install:  $src does not exist"
- 		exit 1
- 	fi
--
-+	
- 	if [ x"$dst" = x ]
- 	then
--		echo "$0: no destination specified" >&2
-+		echo "install:	no destination specified"
- 		exit 1
- 	else
--		:
-+		true
- 	fi
- 
- # If destination is a directory, append the input filename; if your system
- # does not like double slashes in filenames, you may need to add some logic
- 
--	if [ -d "$dst" ]
-+	if [ -d $dst ]
- 	then
--		dst=$dst/`basename "$src"`
-+		dst="$dst"/`basename $src`
- 	else
--		:
-+		true
- 	fi
- fi
- 
- ## this sed command emulates the dirname command
--dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
- 
- # Make sure that the destination directory exists.
- #  this part is taken from Noah Friedman's mkinstalldirs script
- 
- # Skip lots of stat calls in the usual case.
- if [ ! -d "$dstdir" ]; then
--defaultIFS='
--	'
--IFS="${IFS-$defaultIFS}"
-+defaultIFS='	
-+'
-+IFS="${IFS-${defaultIFS}}"
- 
--oIFS=$IFS
-+oIFS="${IFS}"
- # Some sh's can't handle IFS=/ for some reason.
- IFS='%'
--set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
--IFS=$oIFS
-+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
-+IFS="${oIFS}"
- 
- pathcomp=''
- 
- while [ $# -ne 0 ] ; do
--	pathcomp=$pathcomp$1
-+	pathcomp="${pathcomp}${1}"
- 	shift
- 
--	if [ ! -d "$pathcomp" ] ;
-+	if [ ! -d "${pathcomp}" ] ;
-         then
--		$mkdirprog "$pathcomp"
-+		$mkdirprog "${pathcomp}"
- 	else
--		:
-+		true
- 	fi
- 
--	pathcomp=$pathcomp/
-+	pathcomp="${pathcomp}/"
- done
- fi
- 
- if [ x"$dir_arg" != x ]
- then
--	$doit $instcmd "$dst" &&
-+	$doit $instcmd $dst &&
- 
--	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
--	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
--	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
--	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
-+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
-+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
-+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
- else
- 
- # If we're going to rename the final executable, determine the name now.
- 
--	if [ x"$transformarg" = x ]
-+	if [ x"$transformarg" = x ] 
- 	then
--		dstfile=`basename "$dst"`
-+		dstfile=`basename $dst`
- 	else
--		dstfile=`basename "$dst" $transformbasename |
-+		dstfile=`basename $dst $transformbasename | 
- 			sed $transformarg`$transformbasename
- 	fi
- 
- # don't allow the sed command to completely eliminate the filename
- 
--	if [ x"$dstfile" = x ]
-+	if [ x"$dstfile" = x ] 
- 	then
--		dstfile=`basename "$dst"`
-+		dstfile=`basename $dst`
- 	else
--		:
-+		true
- 	fi
- 
--# Make a couple of temp file names in the proper directory.
-+# Make a temp file name in the proper directory.
- 
- 	dsttmp=$dstdir/#inst.$$#
--	rmtmp=$dstdir/#rm.$$#
--
--# Trap to clean up temp files at exit.
--
--	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
--	trap '(exit $?); exit' 1 2 13 15
- 
- # Move or copy the file name to the temp name
- 
--	$doit $instcmd "$src" "$dsttmp" &&
-+	$doit $instcmd $src $dsttmp &&
-+
-+	trap "rm -f ${dsttmp}" 0 &&
- 
- # and set any options; do chmod last to preserve setuid bits
- 
-@@ -239,38 +235,17 @@
- # ignore errors from any of these, just make sure not to ignore
- # errors from the above "$doit $instcmd $src $dsttmp" command.
- 
--	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
--	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
--	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
--	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
--
--# Now remove or move aside any old file at destination location.  We try this
--# two ways since rm can't unlink itself on some systems and the destination
--# file might be busy for other reasons.  In this case, the final cleanup
--# might fail but the new file should still install successfully.
--
--{
--	if [ -f "$dstdir/$dstfile" ]
--	then
--		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
--		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
--		{
--		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
--		  (exit 1); exit
--		}
--	else
--		:
--	fi
--} &&
-+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
-+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
-+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
-+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
- 
- # Now rename the file to the real destination.
- 
--	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-+	$doit $rmcmd -f $dstdir/$dstfile &&
-+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
- 
- fi &&
- 
--# The final little trick to "correctly" pass the exit status to the exit trap.
- 
--{
--	(exit 0); exit
--}
-+exit 0
-diff -ru terminatorX-3.80-org/missing terminatorX-3.80/missing
---- terminatorX-3.80-org/missing	2003-02-21 00:31:32.000000000 +0100
-+++ terminatorX-3.80/missing	2003-03-26 20:29:58.000000000 +0100
-@@ -1,6 +1,6 @@
- #! /bin/sh
- # Common stub for a few missing GNU programs while installing.
--# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-+# Copyright 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
- # Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
- 
- # This program is free software; you can redistribute it and/or modify
-@@ -78,7 +78,7 @@
-     ;;
- 
-   -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
--    echo "missing 0.4 - GNU automake"
-+    echo "missing 0.3 - GNU automake"
-     ;;
- 
-   -*)
-@@ -87,12 +87,7 @@
-     exit 1
-     ;;
- 
--  aclocal*)
--    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
--       # We have it, but it failed.
--       exit 1
--    fi
--
-+  aclocal)
-     echo 1>&2 "\
- WARNING: \`$1' is missing on your system.  You should only need it if
-          you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-@@ -102,11 +97,6 @@
-     ;;
- 
-   autoconf)
--    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
--       # We have it, but it failed.
--       exit 1
--    fi
--
-     echo 1>&2 "\
- WARNING: \`$1' is missing on your system.  You should only need it if
-          you modified \`${configure_ac}'.  You might want to install the
-@@ -116,11 +106,6 @@
-     ;;
- 
-   autoheader)
--    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
--       # We have it, but it failed.
--       exit 1
--    fi
--
-     echo 1>&2 "\
- WARNING: \`$1' is missing on your system.  You should only need it if
-          you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-@@ -139,12 +124,7 @@
-     touch $touch_files
-     ;;
- 
--  automake*)
--    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
--       # We have it, but it failed.
--       exit 1
--    fi
--
-+  automake)
-     echo 1>&2 "\
- WARNING: \`$1' is missing on your system.  You should only need it if
-          you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-@@ -155,34 +135,6 @@
- 	   while read f; do touch "$f"; done
-     ;;
- 
--  autom4te)
--    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
--       # We have it, but it failed.
--       exit 1
--    fi
--
--    echo 1>&2 "\
--WARNING: \`$1' is needed, and you do not seem to have it handy on your
--         system.  You might have modified some files without having the
--         proper tools for further handling them.
--         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
--         archive site."
--
--    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
--    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
--    if test -f "$file"; then
--	touch $file
--    else
--	test -z "$file" || exec >$file
--	echo "#! /bin/sh"
--	echo "# Created by GNU Automake missing as a replacement of"
--	echo "#  $ $@"
--	echo "exit 0"
--	chmod +x $file
--	exit 1
--    fi
--    ;;
--
-   bison|yacc)
-     echo 1>&2 "\
- WARNING: \`$1' is missing on your system.  You should only need it if
-@@ -237,11 +189,6 @@
-     ;;
- 
-   help2man)
--    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
--       # We have it, but it failed.
--       exit 1
--    fi
--
-     echo 1>&2 "\
- WARNING: \`$1' is missing on your system.  You should only need it if
- 	 you modified a dependency of a manual page.  You may need the
-@@ -293,23 +240,23 @@
-     # Look for gnutar/gtar before invocation to avoid ugly error
-     # messages.
-     if (gnutar --version > /dev/null 2>&1); then
--       gnutar "$@" && exit 0
-+       gnutar ${1+"$@"} && exit 0
-     fi
-     if (gtar --version > /dev/null 2>&1); then
--       gtar "$@" && exit 0
-+       gtar ${1+"$@"} && exit 0
-     fi
-     firstarg="$1"
-     if shift; then
- 	case "$firstarg" in
- 	*o*)
- 	    firstarg=`echo "$firstarg" | sed s/o//`
--	    tar "$firstarg" "$@" && exit 0
-+	    tar "$firstarg" ${1+"$@"} && exit 0
- 	    ;;
- 	esac
- 	case "$firstarg" in
- 	*h*)
- 	    firstarg=`echo "$firstarg" | sed s/h//`
--	    tar "$firstarg" "$@" && exit 0
-+	    tar "$firstarg" ${1+"$@"} && exit 0
- 	    ;;
- 	esac
-     fi
-diff -ru terminatorX-3.80-org/mkinstalldirs terminatorX-3.80/mkinstalldirs
---- terminatorX-3.80-org/mkinstalldirs	2003-02-21 00:31:32.000000000 +0100
-+++ terminatorX-3.80/mkinstalldirs	2003-03-26 20:29:58.000000000 +0100
-@@ -4,108 +4,37 @@
- # Created: 1993-05-16
- # Public domain
- 
--errstatus=0
--dirmode=""
--
--usage="\
--Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-+# $Id: terminatorX-3.80.GNOMEpresent.patch,v 1.1 2003/06/25 10:41:17 torbenh Exp $
- 
--# process command line arguments
--while test $# -gt 0 ; do
--  case $1 in
--    -h | --help | --h*)         # -h for help
--      echo "$usage" 1>&2
--      exit 0
--      ;;
--    -m)                         # -m PERM arg
--      shift
--      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
--      dirmode=$1
--      shift
--      ;;
--    --)                         # stop option processing
--      shift
--      break
--      ;;
--    -*)                         # unknown option
--      echo "$usage" 1>&2
--      exit 1
--      ;;
--    *)                          # first non-opt arg
--      break
--      ;;
--  esac
--done
--
--for file
--do
--  if test -d "$file"; then
--    shift
--  else
--    break
--  fi
--done
--
--case $# in
--  0) exit 0 ;;
--esac
--
--case $dirmode in
--  '')
--    if mkdir -p -- . 2>/dev/null; then
--      echo "mkdir -p -- $*"
--      exec mkdir -p -- "$@"
--    fi
--    ;;
--  *)
--    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
--      echo "mkdir -m $dirmode -p -- $*"
--      exec mkdir -m "$dirmode" -p -- "$@"
--    fi
--    ;;
--esac
-+errstatus=0
- 
- for file
- do
--  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
--  shift
-+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-+   shift
- 
--  pathcomp=
--  for d
--  do
--    pathcomp="$pathcomp$d"
--    case $pathcomp in
--      -*) pathcomp=./$pathcomp ;;
--    esac
--
--    if test ! -d "$pathcomp"; then
--      echo "mkdir $pathcomp"
--
--      mkdir "$pathcomp" || lasterr=$?
--
--      if test ! -d "$pathcomp"; then
--  	errstatus=$lasterr
--      else
--  	if test ! -z "$dirmode"; then
--	  echo "chmod $dirmode $pathcomp"
--    	  lasterr=""
--  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
--
--  	  if test ! -z "$lasterr"; then
--  	    errstatus=$lasterr
--  	  fi
--  	fi
--      fi
--    fi
-+   pathcomp=
-+   for d
-+   do
-+     pathcomp="$pathcomp$d"
-+     case "$pathcomp" in
-+       -* ) pathcomp=./$pathcomp ;;
-+     esac
-+
-+     if test ! -d "$pathcomp"; then
-+        echo "mkdir $pathcomp"
-+
-+        mkdir "$pathcomp" || lasterr=$?
-+
-+        if test ! -d "$pathcomp"; then
-+  	  errstatus=$lasterr
-+        fi
-+     fi
- 
--    pathcomp="$pathcomp/"
--  done
-+     pathcomp="$pathcomp/"
-+   done
- done
- 
- exit $errstatus
- 
--# Local Variables:
--# mode: shell-script
--# sh-indentation: 2
--# End:
- # mkinstalldirs ends here
-diff -ru terminatorX-3.80-org/src/tX_global.c terminatorX-3.80/src/tX_global.c
---- terminatorX-3.80-org/src/tX_global.c	2003-04-16 21:45:56.000000000 +0200
-+++ terminatorX-3.80/src/tX_global.c	2003-04-30 22:14:27.000000000 +0200
-@@ -230,8 +230,8 @@
- 	char indent[]="\t";
- 	FILE *rc=NULL;
- 	gzFile rz=NULL;
--	_store_compress_xml=0;
- 	char tmp_xml_buffer[4096];
-+	_store_compress_xml=0;
- 	
- 	get_rc_name(rc_name);
- 
-@@ -316,6 +316,9 @@
- char *encode_xml(char *dest, const char *src) {
- 	int i, t, max;
- 	char tmp[4096];
-+	int outlen=4096;
-+	int inlen;
-+	int res;
- 	
- 	tmp[0]=0;
- 	t=0;
-@@ -333,16 +336,13 @@
- 	}
- 	tmp[t]=0;
- 
--	int outlen=4096;
--	int inlen=t;
--	
--	int res=isolat1ToUTF8((unsigned char *) dest, &outlen, (unsigned char *) tmp, &inlen);
-+	inlen=t;
-+	res=isolat1ToUTF8((unsigned char *) dest, &outlen, (unsigned char *) tmp, &inlen);
- 	dest[outlen]=0;
- 	if (res<0) {
- 		tX_error("failed to encode string (%s) to UTF-8.", src);
- 	}
- 	
--	//tX_debug("encode_xml: from \"%s\" to \"%s\".", src, dest); 
- 	return dest;
- }
- 
-diff -ru terminatorX-3.80-org/src/tX_widget.c terminatorX-3.80/src/tX_widget.c
---- terminatorX-3.80-org/src/tX_widget.c	2003-04-12 18:17:23.000000000 +0200
-+++ terminatorX-3.80/src/tX_widget.c	2003-04-26 19:42:48.000000000 +0200
-@@ -154,10 +154,11 @@
- }
- 
- static void gtk_tx_destroy(GtkObject * object) {
-+	GtkTx *tx;
- 	g_return_if_fail(object != NULL);
- 	g_return_if_fail(GTK_IS_TX(object));
- 
--	GtkTx *tx=GTK_TX(object);
-+	tx=GTK_TX(object);
- 	
- 	if (tx->disp_data) { free(tx->disp_data); tx->disp_data=NULL; }
- 	
diff --git a/media-sound/terminatorX/files/terminatorX-3.80.fixGnomeMakefile.patch b/media-sound/terminatorX/files/terminatorX-3.80.fixGnomeMakefile.patch
deleted file mode 100644
index 0b833da13695..000000000000
--- a/media-sound/terminatorX/files/terminatorX-3.80.fixGnomeMakefile.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- terminatorX-3.80/gnome-support/Makefile.in.orig	2003-06-25 11:10:16.000000000 +0200
-+++ terminatorX-3.80/gnome-support/Makefile.in	2003-06-25 11:12:32.000000000 +0200
-@@ -116,9 +116,9 @@
- build_alias = @build_alias@
- datadir = @datadir@
- exec_prefix = @exec_prefix@
- gnomeconfig = @gnomeconfig@
--gnomedatadir = @gnomedatadir@
-+gnomedatadir = $(DESTDIR)@gnomedatadir@
- gnomepresent = @gnomepresent@
- host_alias = @host_alias@
- includedir = @includedir@
- infodir = @infodir@
-diff -ur terminatorX-3.80/doc/terminatorX-manual/C/Makefile.in terminatorX-3.80.orig/doc/terminatorX-manual/C/Makefile.in
---- terminatorX-3.80/doc/terminatorX-manual/C/Makefile.in	2003-06-25 12:06:28.000000000 +0200
-+++ terminatorX-3.80.orig/doc/terminatorX-manual/C/Makefile.in	2003-06-25 11:58:51.000000000 +0200
-@@ -186,7 +186,7 @@
- install_sh = @install_sh@
- libdir = @libdir@
- libexecdir = @libexecdir@
--localstatedir = @localstatedir@
-+localstatedir = $(DESTDIR)@localstatedir@
- mandir = @mandir@
- oldincludedir = @oldincludedir@
- prefix = @prefix@
diff --git a/media-sound/terminatorX/terminatorX-3.80.ebuild b/media-sound/terminatorX/terminatorX-3.80.ebuild
deleted file mode 100644
index 3794a30268d6..000000000000
--- a/media-sound/terminatorX/terminatorX-3.80.ebuild
+++ /dev/null
@@ -1,87 +0,0 @@
-# Copyright 1999-2003 Gentoo Technologies, Inc.
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/media-sound/terminatorX/terminatorX-3.80.ebuild,v 1.1 2003/06/25 10:41:17 torbenh Exp $
-
-S=${WORKDIR}/${P}
-DESCRIPTION='terminatorX is a realtime audio synthesizer that allows you to "scratch" on digitally sampled audio data'
-HOMEPAGE="http://www.terminatorx.cx/"
-SRC_URI="http://www.terminatorx.cx/dist/${P}.tar.gz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~x86"
-IUSE="3dnow alsa mpeg oggvorbis oss sox"
-
-DEPEND="alsa? ( >=media-libs/alsa-lib-0.9 )
-	mpeg? ( media-sound/mad )
-	oggvorbis? ( >=media-libs/libvorbis-1.0_beta4 )
-	sox? ( media-sound/sox )
-	>=x11-libs/gtk+-2.2.0
-	>=dev-libs/glib-2.2.0
-	>=x11-base/xfree-4.2.0-r11
-	dev-libs/libxml
-	media-libs/audiofile
-	media-libs/ladspa-sdk
-	media-libs/ladspa-cmt
-	app-text/scrollkeeper
-	media-libs/liblrdf"
-
-src_unpack() {
-	unpack ${A}
-	cd ${S}
-
-	epatch ${FILESDIR}/terminatorX-3.80.GNOMEpresent.patch
-	epatch ${FILESDIR}/terminatorX-3.80.fixGnomeMakefile.patch
-}
-
-src_compile() {
-	local myconf=""
-
-	use 3dnow \
-		&& myconf="${myconf} --enable-3dnow"
-	use alsa \
-		&& myconf="${myconf} --enable-alsa" \
-		|| myconf="${myconf} --disable-alsa"
-	use mpeg \
-		&& myconf="${myconf} --enable-mad" \
-		|| myconf="${myconf} --disable-mad" \
-		|| myconf="${myconf} --disable-mpg123"
-	use oggvorbis \
-		&& myconf="${myconf} --enable-vorbis" \
-		|| myconf="${myconf} --disable-vorbis" \
-		|| myconf="${myconf} --disable-ogg123"
-	use oss \
-		&& myconf="${myconf} --enable-oss" \
-		#|| myconf="${myconf} --disable-oss" # Doesn't work
-	use sox \
-		&& myconf="${myconf} --enable-sox"
-
-	WANT_AUTOMAKE_1_6=1 econf ${myconf}
-
-	make || die
-}
-
-src_install() {
-	make DESTDIR=${D} install
-}
-
-pkg_postinst() {
-	echo "
-Since Version 3.73 terminatorX supports
-running suid root. If you install the terminatorX binary suid
-root with the following commands:
-
-> chown root /usr/bin/terminatorX
-> chmod u+s /usr/bin/terminatorX
-
-terminatorX will then create the engine thread with realtime
-priority.
-
-There is a small chance that a malicious attacker could
-utilize terminatorX to acquire root privileges if installed suid
-root, although it should require quite some effort to create an
-exploit for that. On the other hand realtime scheduling
-massively improves the playback performance. So depending on who
-can access your computer you will have to decide for yourself on
-performance vs security.
-"
-}