diff options
Diffstat (limited to 'net-wireless/bluez')
| -rw-r--r-- | net-wireless/bluez/bluez-5.56-r1.ebuild | 295 | ||||
| -rw-r--r-- | net-wireless/bluez/files/bluetooth-conf.d | 1 | ||||
| -rw-r--r-- | net-wireless/bluez/files/bluetooth-init.d-r5 | 13 | ||||
| -rw-r--r-- | net-wireless/bluez/files/bluez-5.56-avdtp-disconnects.patch | 41 |
4 files changed, 350 insertions, 0 deletions
diff --git a/net-wireless/bluez/bluez-5.56-r1.ebuild b/net-wireless/bluez/bluez-5.56-r1.ebuild new file mode 100644 index 000000000000..ee7911d7c17c --- /dev/null +++ b/net-wireless/bluez/bluez-5.56-r1.ebuild @@ -0,0 +1,295 @@ +# Copyright 1999-2021 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=7 +PYTHON_COMPAT=( python3_{7..9} ) + +inherit autotools linux-info python-single-r1 readme.gentoo-r1 systemd udev multilib-minimal + +DESCRIPTION="Bluetooth Tools and System Daemons for Linux" +HOMEPAGE="http://www.bluez.org" +SRC_URI="https://www.kernel.org/pub/linux/bluetooth/${P}.tar.xz" + +LICENSE="GPL-2+ LGPL-2.1+" +SLOT="0/3" +KEYWORDS="~amd64 ~arm ~arm64 ~hppa ~mips ~ppc ~ppc64 ~x86" +IUSE="btpclient cups doc debug deprecated extra-tools experimental +mesh midi +obex +readline selinux systemd test test-programs +udev user-session" + +# Since this release all remaining extra-tools need readline support, but this could +# change in the future, hence, this REQUIRED_USE constraint could be dropped +# again in the future. +REQUIRED_USE=" + extra-tools? ( deprecated readline ) + test? ( ${PYTHON_REQUIRED_USE} ) + test-programs? ( ${PYTHON_REQUIRED_USE} ) +" + +TEST_DEPS="${PYTHON_DEPS} + $(python_gen_cond_dep ' + >=dev-python/dbus-python-1[${PYTHON_MULTI_USEDEP}] + dev-python/pygobject:3[${PYTHON_MULTI_USEDEP}] + ') +" +BDEPEND=" + virtual/pkgconfig + test? ( ${TEST_DEPS} ) +" +DEPEND=" + >=dev-libs/glib-2.28:2[${MULTILIB_USEDEP}] + >=sys-apps/hwids-20121202.2 + btpclient? ( >=dev-libs/ell-0.28 ) + cups? ( net-print/cups:= ) + mesh? ( + >=dev-libs/ell-0.37 + >=dev-libs/json-c-0.13:= + sys-libs/readline:0= + ) + midi? ( media-libs/alsa-lib ) + obex? ( dev-libs/libical:= ) + readline? ( sys-libs/readline:0= ) + systemd? ( + >=sys-apps/dbus-1.6:=[user-session=] + sys-apps/systemd + ) + !systemd? ( >=sys-apps/dbus-1.6:= ) + udev? ( >=virtual/udev-172 ) +" +RDEPEND="${DEPEND} + selinux? ( sec-policy/selinux-bluetooth ) + test-programs? ( ${TEST_DEPS} ) +" + +RESTRICT="!test? ( test )" + +PATCHES=( + # Try both udevadm paths to cover udev/systemd vs. eudev locations (#539844) + # http://www.spinics.net/lists/linux-bluetooth/msg58739.html + # https://bugs.gentoo.org/539844 + "${FILESDIR}"/${PN}-udevadm-path-r1.patch + + # Fedora patches + # http://www.spinics.net/lists/linux-bluetooth/msg40136.html + "${FILESDIR}"/0001-obex-Use-GLib-helper-function-to-manipulate-paths.patch + + # avdtp: Fix removing all remote SEPs when loading from cache (from 'master') + "${FILESDIR}"/${P}-avdtp-disconnects.patch +) + +pkg_setup() { + # From http://www.linuxfromscratch.org/blfs/view/svn/general/bluez.html + # to prevent bugs like: + # https://bugzilla.kernel.org/show_bug.cgi?id=196621 + CONFIG_CHECK="~NET ~BT ~BT_RFCOMM ~BT_RFCOMM_TTY ~BT_BNEP ~BT_BNEP_MC_FILTER + ~BT_BNEP_PROTO_FILTER ~BT_HIDP ~RFKILL" + # https://bugzilla.kernel.org/show_bug.cgi?id=196621 + # https://bugzilla.kernel.org/show_bug.cgi?id=206815 + if use mesh || use test; then + CONFIG_CHECK="${CONFIG_CHECK} ~CRYPTO_USER + ~CRYPTO_USER_API ~CRYPTO_USER_API_AEAD ~CRYPTO_USER_API_HASH + ~CRYPTO_AES ~CRYPTO_CCM ~CRYPTO_AEAD ~CRYPTO_CMAC" + fi + if use test; then + # http://www.linuxfromscratch.org/blfs/view/svn/general/bluez.html + CONFIG_CHECK="${CONFIG_CHECK} ~CRYPTO ~CRYPTO_USER_API_HASH ~CRYPTO_USER_API_SKCIPHER" + fi + linux-info_pkg_setup + + if use test || use test-programs; then + python-single-r1_pkg_setup + fi + + if ! use udev; then + ewarn + ewarn "You are installing ${PN} with USE=-udev. This means various bluetooth" + ewarn "devices and adapters from Apple, Dell, Logitech etc. will not work," + ewarn "and hid2hci will not be available." + ewarn + fi +} + +src_prepare() { + default + + # http://www.spinics.net/lists/linux-bluetooth/msg38490.html + if ! use user-session || ! use systemd; then + eapply "${FILESDIR}"/0001-Allow-using-obexd-without-systemd-in-the-user-session-r2.patch + fi + + if use cups; then + sed -i \ + -e "s:cupsdir = \$(libdir)/cups:cupsdir = $(cups-config --serverbin):" \ + Makefile.{in,tools} || die + fi + + eautoreconf + + multilib_copy_sources +} + +multilib_src_configure() { + local myconf=( + # readline is automagic when client is enabled + # --enable-client always needs readline, bug #504038 + # --enable-mesh is handled in the same way + ac_cv_header_readline_readline_h=$(multilib_native_usex readline) + ac_cv_header_readline_readline_h=$(multilib_native_usex mesh) + ) + + if ! multilib_is_native_abi; then + myconf+=( + # deps not used for the library + {DBUS,GLIB}_{CFLAGS,LIBS}=' ' + ) + fi + + econf \ + --localstatedir=/var \ + --disable-android \ + --enable-datafiles \ + --enable-optimization \ + $(use_enable debug) \ + --enable-pie \ + --enable-threads \ + --enable-library \ + --enable-tools \ + --enable-manpages \ + --enable-monitor \ + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \ + --with-systemduserunitdir="$(systemd_get_userunitdir)" \ + $(multilib_native_use_enable btpclient) \ + $(multilib_native_use_enable btpclient external-ell) \ + $(multilib_native_use_enable cups) \ + $(multilib_native_use_enable deprecated) \ + $(multilib_native_use_enable experimental) \ + $(multilib_native_use_enable mesh) \ + $(multilib_native_use_enable mesh external-ell) \ + $(multilib_native_use_enable midi) \ + $(multilib_native_use_enable obex) \ + $(multilib_native_use_enable readline client) \ + $(multilib_native_use_enable systemd) \ + $(multilib_native_use_enable test-programs test) \ + $(multilib_native_use_enable udev) \ + $(multilib_native_use_enable udev hid2hci) \ + $(multilib_native_use_enable udev sixaxis) +} + +multilib_src_compile() { + if multilib_is_native_abi; then + default + else + emake -f Makefile -f - libs \ + <<<'libs: $(lib_LTLIBRARIES)' + fi +} + +multilib_src_test() { + multilib_is_native_abi && default +} + +multilib_src_install() { + if multilib_is_native_abi; then + emake DESTDIR="${D}" install + + # Only install extra-tools when relevant USE flag is enabled + if use extra-tools; then + ewarn "Upstream doesn't support using this tools and their bugs are" + ewarn "likely to be ignored forever, also they can break without" + ewarn "previous announcement." + ewarn "Upstream also states all this tools are not really needed," + ewarn "then, if you still need to rely on them, you must ask them" + ewarn "to either install that tool by default or add the needed" + ewarn "functionality to the existing 'official' tools." + ewarn "Please report this issues to:" + ewarn "http://www.bluez.org/development/lists/" + + # Upstream doesn't install this, bug #524640 + # http://permalink.gmane.org/gmane.linux.bluez.kernel/53115 + # http://comments.gmane.org/gmane.linux.bluez.kernel/54564 + dobin tools/btmgmt + # gatttool is only built with readline, bug #530776 + # https://bugzilla.redhat.com/show_bug.cgi?id=1141909 + # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=720486 + # https://bugs.archlinux.org/task/37686 + dobin attrib/gatttool + # https://bugzilla.redhat.com/show_bug.cgi?id=1699680 + dobin tools/avinfo + fi + + # Not installed by default after being built, bug #666756 + use btpclient && dobin tools/btpclient + + # Unittests are not that useful once installed, so make them optional + if use test-programs; then + # Drop python2 only test tools + # https://bugzilla.kernel.org/show_bug.cgi?id=206819 + rm "${ED}"/usr/$(get_libdir)/bluez/test/simple-player || die + # https://bugzilla.kernel.org/show_bug.cgi?id=206821 + rm "${ED}"/usr/$(get_libdir)/bluez/test/test-hfp || die + # https://bugzilla.kernel.org/show_bug.cgi?id=206823 + rm "${ED}"/usr/$(get_libdir)/bluez/test/test-sap-server || die + + python_fix_shebang "${ED}"/usr/$(get_libdir)/bluez/test + + for i in $(find "${ED}"/usr/$(get_libdir)/bluez/test -maxdepth 1 -type f ! -name "*.*"); do + dosym "${i}" /usr/bin/bluez-"${i##*/}" + done + fi + else + emake DESTDIR="${D}" \ + install-pkgincludeHEADERS \ + install-libLTLIBRARIES \ + install-pkgconfigDATA + fi +} + +multilib_src_install_all() { + # We need to ensure obexd can be spawned automatically by systemd + # when user-session is enabled: + # http://marc.info/?l=linux-bluetooth&m=148096094716386&w=2 + # https://bugs.gentoo.org/show_bug.cgi?id=577842 + # https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=804908 + # https://bugs.archlinux.org/task/45816 + # https://bugzilla.redhat.com/show_bug.cgi?id=1318441 + # https://bugzilla.redhat.com/show_bug.cgi?id=1389347 + if use user-session && use systemd; then + ln -s "${ED}"/usr/lib/systemd/user/obex.service "${ED}"/usr/lib/systemd/user/dbus-org.bluez.obex.service + fi + + find "${D}" -name '*.la' -type f -delete || die + + keepdir /var/lib/bluetooth + + # Upstream don't want people to play with them + # But we keep installing them due to 'historical' reasons + insinto /etc/bluetooth + local d + for d in input network; do + doins profiles/${d}/${d}.conf + done + # Setup auto enable as Fedora does for allowing to use + # keyboards/mouse as soon as possible + sed -i 's/#\[Policy\]$/\[Policy\]/; s/#AutoEnable=false/AutoEnable=true/' src/main.conf || die + doins src/main.conf + + newinitd "${FILESDIR}"/bluetooth-init.d-r5 bluetooth + newconfd "${FILESDIR}"/bluetooth-conf.d bluetooth + + einstalldocs + use doc && dodoc doc/*.txt + # Install .json files as examples to be used by meshctl + if use mesh; then + dodoc tools/mesh-gatt/*.json + local DOC_CONTENTS="Some example .json files were installed into + /usr/share/doc/${PF} to be used with meshctl. Feel free to + uncompress and copy them to ~/.config/meshctl to use them." + readme.gentoo_create_doc + fi +} + +pkg_postinst() { + use udev && udev_reload + systemd_reenable bluetooth.service + + has_version net-dialup/ppp || elog "To use dial up networking you must install net-dialup/ppp" + use mesh && readme.gentoo_print_elog +} diff --git a/net-wireless/bluez/files/bluetooth-conf.d b/net-wireless/bluez/files/bluetooth-conf.d new file mode 100644 index 000000000000..d5b5005ce7fc --- /dev/null +++ b/net-wireless/bluez/files/bluetooth-conf.d @@ -0,0 +1 @@ +#BLUETOOTH_OPTS="-E" diff --git a/net-wireless/bluez/files/bluetooth-init.d-r5 b/net-wireless/bluez/files/bluetooth-init.d-r5 new file mode 100644 index 000000000000..4d60234e0304 --- /dev/null +++ b/net-wireless/bluez/files/bluetooth-init.d-r5 @@ -0,0 +1,13 @@ +#!/sbin/openrc-run +# Copyright 1999-2021 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +pidfile="/run/bluetoothd.pid" +command="/usr/libexec/bluetooth/bluetoothd" +command_args="${BLUETOOTH_OPTS}" +command_background=1 + +depend() { + after coldplug + need dbus localmount hostname +} diff --git a/net-wireless/bluez/files/bluez-5.56-avdtp-disconnects.patch b/net-wireless/bluez/files/bluez-5.56-avdtp-disconnects.patch new file mode 100644 index 000000000000..c2e34152748d --- /dev/null +++ b/net-wireless/bluez/files/bluez-5.56-avdtp-disconnects.patch @@ -0,0 +1,41 @@ +From 28ddec8d6b829e002fa268c07b71e4c564ba9e16 Mon Sep 17 00:00:00 2001 +From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> +Date: Thu, 11 Mar 2021 07:36:07 -0800 +Subject: [PATCH] avdtp: Fix removing all remote SEPs when loading from cache + +If avdtp_discover is called after cache has been loaded it end up +removing all remote SEPs as they have not been discovered yet. + +Fixes: https://github.com/bluez/bluez/issues/102 +--- + profiles/audio/avdtp.c | 16 ++++++++++++---- + 1 file changed, 12 insertions(+), 4 deletions(-) + +diff --git a/profiles/audio/avdtp.c b/profiles/audio/avdtp.c +index 088ca58b3..1d5871c62 100644 +--- a/profiles/audio/avdtp.c ++++ b/profiles/audio/avdtp.c +@@ -3381,10 +3381,18 @@ int avdtp_discover(struct avdtp *session, avdtp_discover_cb_t cb, + session->discover = g_new0(struct discover_callback, 1); + + if (session->seps) { +- session->discover->cb = cb; +- session->discover->user_data = user_data; +- session->discover->id = g_idle_add(process_discover, session); +- return 0; ++ struct avdtp_remote_sep *sep = session->seps->data; ++ ++ /* Check that SEP have been discovered as it may be loaded from ++ * cache. ++ */ ++ if (sep->discovered) { ++ session->discover->cb = cb; ++ session->discover->user_data = user_data; ++ session->discover->id = g_idle_add(process_discover, ++ session); ++ return 0; ++ } + } + + err = send_request(session, FALSE, NULL, AVDTP_DISCOVER, NULL, 0); + |