diff options
Diffstat (limited to 'doc/gettext/openrc-migration.xml.pot')
| -rw-r--r-- | doc/gettext/openrc-migration.xml.pot | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/doc/gettext/openrc-migration.xml.pot b/doc/gettext/openrc-migration.xml.pot new file mode 100644 index 0000000..9e2476f --- /dev/null +++ b/doc/gettext/openrc-migration.xml.pot @@ -0,0 +1,378 @@ +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"POT-Creation-Date: 2010-10-21 23:56+0600\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n" +"Language-Team: LANGUAGE <LL@li.org>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(guide:link):5 +msgid "/doc/en/openrc-migration.xml" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):6 +msgid "Baselayout and OpenRC Migration Guide" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(author:title):8 ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(author:title):11 +msgid "Author" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(mail:link):9 +msgid "cardoe" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(mail:link):12 +msgid "nightmorph" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(author:title):14 +msgid "Contributor" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(mail:link):15 +msgid "uberlord" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(abstract):18 +msgid "This guide shows you how to migrate from baselayout-1 to baselayout-2 and OpenRC." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(version):27 +msgid "2" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(date):28 +msgid "2010-07-20" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):31 +msgid "Background" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):33 +msgid "What's baselayout?" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):36 +msgid "Baselayout provides a basic set of files that are necessary for all systems to function properly, such as <path>/etc/hosts</path>. It also provides the basic filesystem layout used by Gentoo (i.e. <path>/etc</path>, <path>/var</path>, <path>/usr</path>, <path>/home</path> directories)." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):46 +msgid "What's OpenRC?" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):49 +msgid "OpenRC is a dependency-based rc system that works with whatever init is provided by the system, normally <path>/sbin/init</path>. However, it is <e>not</e> a replacement for <path>/sbin/init</path>. The default init used by Gentoo Linux is <c>sys-apps/sysvinit</c>, while Gentoo/FreeBSD uses the FreeBSD init provided by <c>sys-freebsd/freebsd-sbin</c>." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):60 +msgid "So why migrate?" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):63 +msgid "Originally Gentoo's rc system was built into baselayout 1 and written entirely in bash. This led to several limitations. For example, certain system calls need to be accessed during boot and this required C-based callouts to be added. These callouts were each statically linked, causing the rc system to bloat over time." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):70 +msgid "Additionally, as Gentoo expanded to other platforms like Gentoo/FreeBSD and Gentoo Embedded, it became impossible to require a bash-based rc system. This led to a development of baselayout 2, which is written in C and only requires a POSIX-compliant shell. During the development of baselayout 2, it was determined that it was a better fit if baselayout merely provided the base files and filesystem layout for Gentoo and the rc system was broken off into its own package. Thus we have OpenRC." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):80 +msgid "OpenRC is primarily developed by <uri link=\"http://roy.marples.name/openrc\">Roy Marples</uri> and supports all current Gentoo variations (i.e. Gentoo Linux, Gentoo/FreeBSD, Gentoo Embedded, and Gentoo Vserver) and other platforms such as FreeBSD and NetBSD." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):92 +msgid "Migration to OpenRC" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):96 +msgid "Migration to OpenRC is fairly straightforward; it will be pulled in as part of your regular upgrade process by your package manager. The most important step actually comes after you install the new <c>>=sys-apps/baselayout-2</c> and <c>sys-apps/openrc</c> packages. It is <e>critical</e> that you run <c>dispatch-conf</c> and ensure your <path>/etc</path> is up to date before rebooting. <brite>Failure to do so will result in an unbootable system</brite> and will require the use of the Gentoo LiveCD to perform the steps below to repair your system." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):107 +msgid "Once you've finished updating your config files, there are a few things to verify prior to rebooting." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):116 +msgid "/etc/conf.d/rc" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):119 +msgid "<path>/etc/conf.d/rc</path> has been deprecated and any settings you have in there will need to be migrated to the appropriate settings in <path>/etc/rc.conf</path>. Please read through <path>/etc/rc.conf</path> and <path>/etc/conf.d/rc</path> and migrate the settings. Once you are complete, delete <path>/etc/conf.d/rc</path>." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):130 +msgid "Kernel modules" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):133 +msgid "Normally, when you want certain kernel modules automatically loaded at boot, you place them into <path>/etc/modules.autoload.d/kernel-2.6</path> along with any parameters you wanted to pass to them. In baselayout-2, this file is not used anymore. Instead, autoloaded modules and module parameters are placed in one file, <path>/etc/conf.d/modules</path>, no matter the kernel version." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):141 +msgid "An example old style configuration would be:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):145 +msgid "/etc/modules.autoload.d/kernel-2.6" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):145 +#, no-wrap +msgid "\nivtv\ncx88_dvb video_br=2\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):150 +msgid "Converting the above example would result in the following:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):154 +msgid "/etc/conf.d/modules" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):154 +#, no-wrap +msgid "\n<comment># Modules autoloaded at boot</comment>\nmodules_2_6=\"ivtv cx88_dvb\"\n<comment># Module parameters</comment>\nmodule_cx88_dvb_args_2_6=\"video_br=2\"\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):161 +msgid "In the above examples, the modules and their parameters would only be passed to 2.6.x series kernels. The new configuration allows for fine grained control over the modules and parameters based on kernel version." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):167 +msgid "An in-depth example would be:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):171 +msgid "detailed example of /etc/conf.d/modules" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):171 +#, no-wrap +msgid "\n<comment># Always load ochi1394 and ieee1394, no matter the kernel version</comment>\nmodules=\"ohci1394 ieee1394\"\n<comment># Only load tun and usbserial for 2.6.x series kernels</comment>\nmodules_2_6=\"tun usbserial\"\n<comment># Only load cx88_dvb for 2.6.23 kernels</comment>\nmodules_2_6_23=\"cx88_dvb\"\n<comment># Only load ivtv for 2.6.23-gentoo-r5</comment>\nmodules_2_6_23_gentoo_r5=\"ivtv\"\n\n<comment># For 2.6.23-gentoo-r5, pass video_br=2 to cx88_dvb</comment>\nmodule_cx88_dvb_args_2_6_23_gentoo_r5=\"video_br=2\"\n<comment># For 2.6.x series kernels, always pass vendor and product</comment>\nmodule_usbserial_args_2_6=\"vendor=0x1410 product=0x2110\"\n<comment># Always pass debug to ieee1394</comment>\nmodule_ieee1394_args=\"debug\" \n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(impo):189 +msgid "The <b>module*</b> variables are not cumulative. The more version-specific variables will override the more general variables." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(note):194 +msgid "Please note the difference between <b>module_</b> and <b>modules_</b>." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):201 +msgid "Boot runlevel" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):204 +msgid "The <c>boot</c> runlevel performs several important steps for every machine. For example, making sure your root filesystem is mounted read/write, that your filesystems are checked for errors, that your mountpoints are available, and that the <path>/proc</path> pseudo-filesystem is started at boot." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):211 +msgid "With OpenRC, volume management services for your block storage devices are no longer run automatically at boot. This includes lvm, raid, swap, device-mapper (dm), dm-crypt, evms, and the like. You must ensure the appropriate initscript for these services is in the <c>boot</c> runlevel, otherwise it's possible that your system will not boot!" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):219 +msgid "While the OpenRC ebuild will attempt to do this migration for you, you should verify that it migrated all the volume management services properly:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):224 +msgid "Display all services in boot runlevel" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):224 +#, no-wrap +msgid "\n# <i>ls -l /etc/runlevels/boot/</i>\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):228 +msgid "If you don't see root, procfs, mtab, swap, and fsck in the above listing, perform the following to add them to the <c>boot</c> runlevel:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):233 +msgid "Adding critical services to the boot runlevel" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):233 +#, no-wrap +msgid "\n# <i>rc-update add root boot</i>\n# <i>rc-update add procfs boot</i>\n# <i>rc-update add mtab boot</i>\n# <i>rc-update add fsck boot</i>\n# <i>rc-update add swap boot</i>\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):241 +msgid "If you know you use mdraid and lvm but do not see them above, you would run the following to add initscripts to the <c>boot</c> runlevel:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):246 +msgid "Adding mdraid and lvm to the boot runlevel" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):246 +#, no-wrap +msgid "\n# <i>rc-update add mdraid boot</i>\n# <i>rc-update add lvm boot</i>\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):254 +msgid "Udev" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):257 +msgid "OpenRC no longer starts <c>udev</c> by default, but it does need to be present in the <c>sysinit</c> runlevel to be started. The OpenRC ebuild should detect if <c>udev</c> was previously enabled and add it to the <c>sysinit</c> runlevel. However, to be safe, check if <c>udev</c> is present:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):264 +msgid "Verifying udev" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):264 +#, no-wrap +msgid "\n# <i>ls -l /etc/runlevels/sysinit</i>\nlrwxrwxrwx 1 root root 14 2009-01-29 08:00 /etc/runlevels/sysinit/udev -> \\\n/etc/init.d/udev\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):270 +msgid "If <c>udev</c> is not listed, add it to the correct runlevel:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):274 +msgid "Adding udev to the sysinit runlevel" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):274 +#, no-wrap +msgid "\n# <i>rc-update add udev sysinit</i>\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):281 +msgid "Network" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):284 +msgid "Due to baselayout and OpenRC being broken into two different packages, your net.eth0 initscript may disappear during the upgrade process. To replace this initscript please perform the following:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):290 +msgid "Adding back missing net.eth0 script" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):290 +#, no-wrap +msgid "\n# <i>cd /etc/init.d</i>\n# <i>ln -s net.lo net.eth0</i>\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):295 +msgid "If you are missing any other network initscripts, follow the instructions above to re-add them. Simply replace <c>eth0</c> with the name of your network device." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):301 +msgid "Also, <path>/etc/conf.d/net</path> no longer uses bash-style arrays for configuration. Please review <path>/usr/share/doc/openrc-<version>/net.example</path> for configuration instructions. Conversion should be relatively straight-forward, for example a static IP assignment would change as follows:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):309 +msgid "Old /etc/conf.d/net style" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):309 +#, no-wrap +msgid "\nconfig_eth0=( \"192.168.1.37 netmask 255.255.255.0 brd 192.168.1.255\" )\nroutes_eth0=( \"default via 192.168.1.100\" )\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):314 +msgid "New /etc/conf.d/net style" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):314 +#, no-wrap +msgid "\nconfig_eth0=\"192.168.1.37 netmask 255.255.255.0 brd 192.168.1.255\"\nroutes_eth0=\"default via 192.168.1.100\"\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):322 +msgid "Clock" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):325 +msgid "Clock settings have been renamed from <path>/etc/conf.d/clock</path> to your system's native tool for adjusting the clock. This means on Linux it will be <path>/etc/conf.d/hwclock</path> and on FreeBSD it will be <path>/etc/conf.d/adjkerntz</path>. Systems without a working real time clock (RTC) chip should use <path>/etc/init.d/swclock</path>, which sets the system time based on the mtime of a file which is created at system shutdown. The initscripts in <path>/etc/init.d/</path> have also been renamed accordingly, so make sure the appropriate script for your system has been added to the boot runlevel." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):337 +msgid "Additionally, the <c>TIMEZONE</c> variable is no longer in this file. Its contents are instead found in the <path>/etc/timezone</path> file. If it doesn't exist, you will of course have to create it with your timezone. Please review both of these files to ensure their correctness." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):344 +msgid "The proper value for this file is the path relative to your timezone from <path>/usr/share/zoneinfo</path>. For example, for someone living on the east coast of the United States, the following would be a correct setting:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):350 +msgid "/etc/timezone" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):350 +#, no-wrap +msgid "\nAmerica/New_York\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):357 +msgid "XSESSION" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):360 +msgid "The XSESSION variable is no longer found in <path>/etc/rc.conf</path>. Instead, you can set the XSESSION variable per-user in <path>~/.bashrc</path> (or equivalent), or system-wide in <path>/etc/env.d/</path>." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):366 +msgid "Here's an example of setting XSESSION for the whole system:" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):370 +msgid "Setting XSESSION system-wide" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):370 +#, no-wrap +msgid "\n# <i>echo 'XSESSION=\"Xfce4\"' > /etc/env.d/90xsession</i>\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(impo):374 ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(impo):394 +msgid "You must run <c>env-update</c> after creating a file in <path>/etc/env.d</path>, and then logout and login for it to take effect. If you set the variable in <path>~/.bashrc</path>, you can re-source the file with <c>source ~/.bashrc</c>." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):384 +msgid "EDITOR and PAGER" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):387 +msgid "The EDITOR variable is no longer found in <path>/etc/rc.conf</path>. Both EDITOR and PAGER are set by default in <path>/etc/profile</path>. You should change this as needed in your <path>~/.bashrc</path> (or equivalent) file or create <path>/etc/env.d/99editor</path> and set the system default there." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):404 +msgid "Boot log" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):407 +msgid "Previously, you could log the boot process by using <c>app-admin/showconsole</c>. However, OpenRC now handles all logging internally, so there's no need for the hacks that <c>showconsole</c> employed. You can safely unmerge <c>showconsole</c>. To continue logging boot messages, just set the appropriate variable in <path>/etc/rc.conf</path>. Logs will appear in <path>/var/log/rc.log</path>." +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre:caption):416 +msgid "Enabling boot logging in /etc/rc.conf" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(pre):416 +#, no-wrap +msgid "\nrc_logger=\"YES\"\n" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(title):423 +msgid "Finishing up" +msgstr "" + +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(p):426 +msgid "Once you've finished updating your config files and initscripts, the last thing to do is <b>reboot</b>. This is necessary because system state information is not preserved during the upgrade, so you'll need to provide it with a fresh boot." +msgstr "" + +#. Place here names of translator, one per line. Format should be NAME; ROLE; E-MAIL +#: ../../gentoo/xml/htdocs/doc/en//openrc-migration.xml(None):0 +msgid "translator-credits" +msgstr "" + |