Pruned old ebuild.

(Portage version: 2.0.54)

7 files changed, 0 insertions, 408 deletions

diff --git a/sys-apps/lm_sensors/files/digest-lm_sensors-2.9.1-r1 b/sys-apps/lm_sensors/files/digest-lm_sensors-2.9.1-r1
deleted file mode 100644
index 9b9f92a218ca..000000000000
--- a/sys-apps/lm_sensors/files/digest-lm_sensors-2.9.1-r1
+++ /dev/null
@@ -1 +0,0 @@
-MD5 f5af615e39441d95471bdb72a3f01709 lm_sensors-2.9.1.tar.gz 870765
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d
deleted file mode 100644
index 5adadecf56e9..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d
+++ /dev/null
@@ -1,105 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-2.9.1-lm_sensors-init.d,v 1.1 2005/06/11 11:28:20 brix Exp $
-
-checkconfig() {
-	if [ ! -f /etc/conf.d/lm_sensors ]; then
-		eerror "/etc/conf.d/lm_sensors does not exist, try running sensors-detect"
-		return 1
-	fi
-
-	if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then
-		if [ -z "${MODULE_0}" ]; then
-			eerror "MODULE_0 is not set in /etc/conf.d/lm_sensors, try running sensors-detect"
-			return 1
-		fi
-	fi
-}
-
-start() {
-	checkconfig || return 1
-
-	if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then
-		einfo "Loading lm_sensors modules..."
-
-		mount | grep sysfs &> /dev/null
-		if [ ${?} == 0 ]; then
-			if ! ( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ); then
-				ebegin "  Loading i2c-core"
-				modprobe i2c-core &> /dev/null
-				if [ ${?} != 0 ]; then
-					eerror "    Could not load i2c-core!"
-					eend 1
-				fi
-				( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ) || return 1
-				eend 0
-			fi
-		elif ! [ -e /proc/sys/dev/sensors ]; then
-			ebegin "  Loading i2c-proc"
-			modprobe i2c-proc &> /dev/null
-			if [ ${?} != 0 ]; then
-				eerror "    Could not load i2c-proc!"
-				eend 1
-			fi
-			[ -e /proc/sys/dev/sensors ] || return 1
-			eend 0
-		fi
-
-		i=0
-		while true; do
-			module=`eval echo '$'MODULE_${i}`
-			module_args=`eval echo '$'MODULE_${i}_ARGS`
-			if [ -z "${module}" ]; then
-				break
-			fi
-			ebegin "  Loading ${module}"
-			modprobe ${module} ${module_args} &> /dev/null
-			eend $?
-			i=$((i+1))
-		done
-	fi
-
-	if [ "${INITSENSORS}" = "yes" ]; then
-		if ! [ -f /etc/sensors.conf ]; then
-			eerror "/etc/sensors.conf does not exist!"
-			return 1
-		fi
-
-		ebegin "Initializing sensors"
-		/usr/bin/sensors -s &> /dev/null
-		eend ${?}
-	fi
-}
-
-stop() {
-	checkconfig || return 1
-
-	if [ "${LOADMODULES}" = "yes" -a -f /proc/modules ]; then
-		einfo "Unloading lm_sensors modules..."
-
-		# find the highest possible MODULE_ number
-		i=0
-		while true; do
-			module=`eval echo '$'MODULE_${i}`
-			if [ -z "${module}" ] ; then
-				break
-			fi
-			i=$((i+1))
-		done
-
-		while [ ${i} -gt 0 ]; do
-			i=$((i-1))
-			module=`eval echo '$'MODULE_${i}`
-			ebegin "  Unloading ${module}"
-			rmmod ${module} &> /dev/null
-			eend $?
-		done
-
-		if [ -e /proc/sys/dev/sensors ] ; then
-			ebegin "  Unloading i2c-proc"
-			rmmod i2c-proc &> /dev/null
-			eend $?
-		fi
-	fi
-}
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-pwmconfig.patch b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-pwmconfig.patch
deleted file mode 100644
index af214e768afb..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-pwmconfig.patch
+++ /dev/null
@@ -1,18 +0,0 @@
-diff -urp lm_sensors-2.9.1/prog/pwm/pwmconfig /home/brix/projects/lm_sensors/lm_sensors2/prog/pwm/pwmconfig
---- lm_sensors-2.9.1/prog/pwm/pwmconfig	2005-03-15 20:24:25.000000000 +0100
-+++ /home/brix/projects/lm_sensors/lm_sensors2/prog/pwm/pwmconfig	2005-08-21 15:15:41.000000000 +0200
-@@ -465,9 +465,11 @@ function TestMinStop {
- function SaveConfig {
- 	echo
- 	echo "Saving configuration to $FCCONFIG..."
--	egrep -v '(INTERVAL|FCTEMPS|FCFANS|MAXTEMP|MINTEMP|MINSTART|MINSTOP)' $FCCONFIG >/tmp/fancontrol
--	echo -e "INTERVAL=$INTERVAL\nFCTEMPS=$FCTEMPS\nFCFANS=$FCFANS\nMINTEMP=$MINTEMP\nMAXTEMP=$MAXTEMP\nMINSTART=$MINSTART\nMINSTOP=$MINSTOP" >>/tmp/fancontrol
--	mv /tmp/fancontrol $FCCONFIG
-+	tmpfile=`tempfile` || { echo "$0: Cannot create temporary file" >&2; exit 1;  }
-+	trap " [ -f \"$tmpfile\" ] && /bin/rm -f -- \"$tmpfile\"" 0 1 2 3 13 15
-+	egrep -v '(INTERVAL|FCTEMPS|FCFANS|MAXTEMP|MINTEMP|MINSTART|MINSTOP)' $FCCONFIG >$tmpfile
-+	echo -e "INTERVAL=$INTERVAL\nFCTEMPS=$FCTEMPS\nFCFANS=$FCFANS\nMINTEMP=$MINTEMP\nMAXTEMP=$MAXTEMP\nMINSTART=$MINSTART\nMINSTOP=$MINSTOP" >>$tmpfile
-+	mv $tmpfile $FCCONFIG
- 	#check if file was written correctly
- 	echo 'Configuration saved'
- }
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d
deleted file mode 100644
index 89672f74d38d..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d
+++ /dev/null
@@ -1,7 +0,0 @@
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-conf.d,v 1.1 2005/06/11 11:28:20 brix Exp $
-
-# Extra options to pass to the sensord daemon,
-# see sensord(8) for more information
-SENSORD_OPTIONS=""
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d
deleted file mode 100644
index b5795e9e982a..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensord-init.d,v 1.1 2005/06/11 11:28:20 brix Exp $
-
-CONFIG=/etc/sensors.conf
-
-depend() {
-	need logger
-	use lm_sensors
-}
-
-checkconfig() {
-	if [ ! -f ${CONFIG} ]; then
-		eerror "Configuration file ${CONFIG} not found"
-		return 1
-	fi
-}
-
-start() {
-	checkconfig || return 1
-
-	ebegin "Starting sensord"
-	start-stop-daemon --start --quiet --exec /usr/sbin/sensord \
-		-- --config-file ${CONFIG} ${SENSORD_OPTIONS}
-	eend ${?}
-}
-
-stop() {
-	ebegin "Stopping sensord"
-	start-stop-daemon --stop --quiet --pidfile /var/run/sensord.pid
-	eend ${?}
-}
diff --git a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensors-detect-gentoo.patch
deleted file mode 100644
index 90c1226d6acb..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-2.9.1-sensors-detect-gentoo.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-diff -urp lm_sensors-2.9.1/prog/detect/sensors-detect lm_sensors-2.9.1-sensors-detect-gentoo/prog/detect/sensors-detect
---- lm_sensors-2.9.1/prog/detect/sensors-detect	2005-03-28 01:10:52.000000000 +0200
-+++ lm_sensors-2.9.1-sensors-detect-gentoo/prog/detect/sensors-detect	2005-06-05 14:10:01.000000000 +0200
-@@ -26,6 +26,14 @@
- # each be put in a separate file, using modules and packages. That is beyond
- # me.
- 
-+# Changelog
-+#  02/Mar/2003, Rudo Thomas <thomr9am@ss1000.ms.mff.cuni.cz>
-+#    * a few small changes in config file output to reflect Gentoo Linux layout
-+#      - /etc/sysconfig -> /etc/conf.d
-+#      - /etc/rc.d/init.d -> /etc/init.d
-+#      - added a warning to the generated config file
-+#      - small change when asking about writing the new config file
-+
- require 5.004;
- 
- use strict;
-@@ -5143,39 +5151,44 @@ sub main
-   my $use_isa = not <STDIN> =~ /\s*[Ss]/;
-      
-   my ($modprobes,$configfile) = generate_modprobes $use_isa;
-+  print "\nIf you want to load the modules at startup, generate a config file\n",
-+	"below and make sure lm_sensors gets started; e.g\n",
-+	"\$ rc-update add lm_sensors default.\n";
-   print "\nTo make the sensors modules behave correctly, add these lines to\n",
--        "$modules_conf:\n\n";
-+	"/etc/modules.conf:\n\n";
-   print "#----cut here----\n";
-   print $configfile;
--  print "#----cut here----\n";
--  print "\nTo load everything that is needed, add this to some /etc/rc* ",
--        "file:\n\n";
--  print "#----cut here----\n";
--  print $modprobes;
--  print "# sleep 2 # optional\n",
--        "/usr/local/bin/sensors -s # recommended\n";
--  print "#----cut here----\n";
-+  print "#----end cut here----\n";
-   print "\nWARNING! If you have some things built into your kernel, the list above\n",
-         "will contain too many modules. Skip the appropriate ones! You really should\n",
-         "try these commands right now to make sure everything is working properly.\n",
-         "Monitoring programs won't work until it's done.\n";
--  
--  my $have_sysconfig = -d '/etc/sysconfig';
--  print "\nDo you want to generate /etc/sysconfig/lm_sensors? (".
--    ($have_sysconfig?"YES/no":"yes/NO")."): ";
--  if ($> != 0) {
--    print "\nAs you are not root, we shall skip this step.\n";
--  } else {
--    $_ = <STDIN>;
--    if (($have_sysconfig and not m/^\s*[Nn]/) or m/^\s*[Yy]/) {
--      unless ($have_sysconfig) {
--        mkdir '/etc/sysconfig', 0777
--          or die "Sorry, can't create /etc/sysconfig ($!)?!?";
--      }
--      open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
--        or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)?!?";
--      print SYSCONFIG <<'EOT';
--#    /etc/sysconfig/sensors - Defines modules loaded by /etc/rc.d/init.d/lm_sensors
-+
-+  print "To load everything that is needed, execute the commands above...";
-+
-+  print "\n\n#----cut here----\n";
-+  print $modprobes;
-+  print "# sleep 2 # optional\n",
-+        "/usr/bin/sensors -s # recommended\n";
-+
-+  my $have_config = -f '/etc/conf.d/lm_sensors';
-+  print "\nDo you want to ".($have_config?"overwrite":"generate").
-+	" /etc/conf.d/lm_sensors? Enter s to specify other file name?\n",
-+        "  (".($have_config?"yes/NO":"YES/no")."/s): ";
-+  my $reply = <STDIN>;
-+
-+  if (($have_config and $reply =~ /^\s*[Yy]/) or
-+	(not $have_config and not $reply =~ /^\s*[Nn]/) or
-+	$reply =~ /^\s*[Ss]/) {
-+  my $filename = "/etc/conf.d/lm_sensors";
-+  if ($reply =~ /^\s*[Ss]/) {
-+	print "Specify the file to store the configuration to: ";
-+	$filename = <STDIN>;
-+  }
-+  open(SYSCONFIG, ">".$filename)
-+	or die "Sorry, can't create $filename ($!).";
-+	print SYSCONFIG <<'EOT';
-+#    /etc/conf.d/sensors - Defines modules loaded by /etc/init.d/lm_sensors
- #    Copyright (c) 1998 - 2001  Frodo Looijaard <frodol@dds.nl>
- #
- #    This program is free software; you can redistribute it and/or modify
-@@ -5196,18 +5209,27 @@ sub main
- # See also the lm_sensors homepage at:
- #     http://www2.lm-sensors.nu/~lm78/index.html
- #
--# This file is used by /etc/rc.d/init.d/lm_sensors and defines the modules to
--# be loaded/unloaded. This file is sourced into /etc/rc.d/init.d/lm_sensors.
-+# This file is used by /etc/init.d/lm_sensors and defines the modules to
-+# be loaded/unloaded. This file is sourced into /etc/init.d/lm_sensors.
- #
- # The format of this file is a shell script that simply defines the modules
- # in order as normal variables with the special names:
- #    MODULE_0, MODULE_1, MODULE_2, etc.
- #
-+# Please note that the numbers in MODULE_X must start at 0 and increase in
-+# steps of 1. Any number that is missing will make the init script skip the
-+# rest of the modules. Use MODULE_X_ARGS for arguments.
-+#
- # List the modules that are to be loaded for your system
- #
- EOT
-       print SYSCONFIG
--       "# Generated by sensors-detect on " . scalar localtime() . "\n";
-+       "# Generated by sensors-detect on " . scalar localtime() . "\n\n";
-+      print SYSCONFIG
-+       "# Load modules at startup\n".
-+       "LOADMODULES=yes\n\n".
-+       "# Initialize sensors at startup\n".
-+       "INITSENSORS=yes\n\n";
-       my @modules = grep /^modprobe /, split "\n", $modprobes;
-       my $i = 0;
-       my $sysconfig = "";
-@@ -5217,9 +5239,7 @@ EOT
-         $i++;
-       }
-       print SYSCONFIG $sysconfig;
--      print "Copy prog/init/lm_sensors.init to /etc/rc.d/init.d/lm_sensors\n";
--      print "for initialization at boot time.\n";
--    }
-+      print "Done.\n";
-   }
- }
- 
-Only in lm_sensors-2.9.1-sensors-detect-gentoo/prog/detect: sensors-detect.orig
diff --git a/sys-apps/lm_sensors/files/rc b/sys-apps/lm_sensors/files/rc
deleted file mode 100644
index a8baed5c2539..000000000000
--- a/sys-apps/lm_sensors/files/rc
+++ /dev/null
@@ -1,112 +0,0 @@
-#!/sbin/runscript
-
-start() {
-	if ! [ -f /etc/conf.d/lm_sensors ] ; then
-		eerror "/etc/conf.d/lm_sensors does not exist, try running sensors-detect"
-		return 1
-	fi
-
-	. /etc/conf.d/lm_sensors
-
-	if [ -z "${NOLOADMODULES}" ] ; then
-		if [ -z "${MODULE_0}" ] ; then
-			eerror "MODULE_0 is not set in /etc/conf.d/lm_sensors, try running sensors-detect"
-			return 1
-		fi
-
-		einfo "Loading lm_sensors modules..."
-	
-		mount | grep sysfs &>/dev/null
-		if [ $? == 0 ]; then
-			if ! ( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ); then
-				ebegin "  Loading i2c-core"
-				modprobe i2c-core &>/dev/null
-				if [ $? != 0 ]; then
-					eerror "    Could not load i2c-core!"
-					eend 1
-				fi
-				( [ -e /sys/i2c ] || [ -e /sys/bus/i2c ] ) || return 1
-				eend 0
-			fi
-		elif ! [ -e /proc/sys/dev/sensors ]; then
-			ebegin "  Loading i2c-proc"
-			modprobe i2c-proc &>/dev/null
-			if [ $? != 0 ]; then
-				eerror "    Could not load i2c-proc!"
-				eend 1
-			fi
-			[ -e /proc/sys/dev/sensors ] || return 1
-			eend 0
-		fi
-
-		i=0
-		while true; do
-			module=`eval echo '$'MODULE_${i}`
-			module_args=`eval echo '$'MODULE_${i}_ARGS`
-			if [ -z "${module}" ] ; then
-				break
-			fi
-			ebegin "  Loading ${module}"
-			modprobe ${module} ${module_args} &>/dev/null
-			eend $?
-			i=$((i+1))
-		done
-	fi
-	
-	if ! [ -f /etc/sensors.conf ] ; then
-		eerror "/etc/sensors.conf does not exist!"
-		return 1
-	fi
-
-	ebegin "Initializing sensors"
-	/usr/bin/sensors -s &>/dev/null
-	eend $?
-
-	return 0
-}
-
-stop() {
-	if ! [ -f /etc/conf.d/lm_sensors ] ; then
-		eerror "/etc/conf.d/lm_sensors does not exist, try running sensors-detect"
-		return 1
-	fi
-
-	. /etc/conf.d/lm_sensors
-
-	if [ -z "${NOLOADMODULES}" ] ; then
-		if [ -z "${MODULE_0}" ] ; then
-			eerror "MODULE_0 is not set in /etc/conf.d/lm_sensors, try running sensors-detect"
-			return 1
-		fi
-
-		ebegin "Removing lm_sensors modules"
-		eend $?
-	
-		# find the highest possible MODULE_ number
-		i=0
-		while true; do
-			module=`eval echo '$'MODULE_${i}`
-			if [ -z "${module}" ] ; then
-				break
-			fi
-			i=$((i+1))
-		done
-
-		while [ ${i} -gt 0 ]; do
-			i=$((i-1))
-			module=`eval echo '$'MODULE_${i}`
-			ebegin "  Removing ${module}"
-			rmmod ${module} &>/dev/null
-			eend $?
-		done
-
-		if [ -e /proc/sys/dev/sensors ] ; then
-			ebegin "  Removing i2c-proc"
-			rmmod i2c-proc &>/dev/null
-			eend $?
-		fi
-	fi
-	
-	return 0
-
-}