--- makefile	2002-07-10 16:32:03.000000000 +0200
+++ makefile.new	2002-07-10 16:31:41.000000000 +0200
@@ -2,6 +2,24 @@
 #                                                                             #
 #  Make file for installing Basser Lout Version 3.25                          #
 #                                                                             #
+###############################################################################
+#                                                                             #
+#  Patched for Gentoo Linux ebuild by Christian V. J. Brüssow <cvjb@epost.de> #
+#                                                                             #
+#  WARNING: DO NOT USE THIS MAKE FILE FOR A NORMAL MAKE, ESPECIALLY A MAKE    #
+#           INSTALL! IT WILL NOT DO WHAT YOU EXPECT! IT RELIES HEAVILLY ON    #
+#           GENTOO LINUX' EMERGE/EBUILD SYSTEM TO FUNCTION PROPERLY!          #
+#                                                                             #
+#  Don't blame the Lout author for errors or problems you may have, when      #
+#  using this patched make file! Instead write a mail to the guilty ;-)       #
+#  that is: cvjb@epost.de                                                     #
+#                                                                             #
+#  DISCLAIMER: I (Christian V. J. Brüssow) do not guarantee, that this file   #
+#  will not damage your system (software, hardware, data in any form). You    #
+#  will use it at your own risk.                                              #
+#                                                                             #
+###############################################################################
+#                                                                             #
 #  Jeffrey H. Kingston                                                        #
 #  24 Secember 2001                                                           #
 #                                                                             #
@@ -270,16 +288,16 @@
 USESTAT = 1
 SAFEDFT = 0
 
-# DEBUGGING = 0
-# TRACING =
+DEBUGGING = 0
+TRACING =
 
-DEBUGGING = 1
-TRACING = -g
+# DEBUGGING = 1
+# TRACING = -g
 
-BINDIR	= /usr/staff/jeff/bin
-LIBDIR	= /usr/staff/jeff/lout.lib
-DOCDIR	= /usr/staff/jeff/lout.doc
-MANDIR	= /usr/staff/jeff/lout.man
+BINDIR	= /usr/bin
+LIBDIR	= /usr/lib/lout
+DOCDIR	= /usr/share/doc/lout-3.25-r1
+MANDIR	= /usr/share/man/man1
 
 LIBFONT = font
 LIBMAPS = maps
@@ -297,9 +315,9 @@
 
 COLLATE	= 1
 
-PDF_COMPRESSION	= 0
-ZLIB		=
-ZLIBPATH	=
+PDF_COMPRESSION	= 1
+ZLIB		= /usr/lib/libz.a
+ZLIBPATH	= -I/usr/include/
 
 CC	= gcc
 
@@ -353,92 +371,98 @@
 
 install: lout prg2lout
 	@echo ""
-	@echo "(a) Installing lout and prg2lout binaries into BINDIR $(BINDIR)"
-	cp lout $(BINDIR)/lout
-	chmod 755 $(BINDIR)/lout
-	cp prg2lout $(BINDIR)/prg2lout
-	chmod 755 $(BINDIR)/prg2lout
-	@echo ""
-	@echo "(b) Installing library files into LIBDIR $(LIBDIR)"
-	mkdir $(LIBDIR)
-	chmod 755 $(LIBDIR)
-	@echo ""
-	mkdir $(LIBDIR)/$(LIBINCL)
-	chmod 755 $(LIBDIR)/$(LIBINCL)
-	cp include/* $(LIBDIR)/$(LIBINCL)
-	chmod 644 $(LIBDIR)/$(LIBINCL)/*
-	@echo ""
-	mkdir $(LIBDIR)/$(LIBDATA)
-	chmod 755 $(LIBDIR)/$(LIBDATA)
-	cp data/* $(LIBDIR)/$(LIBDATA)
-	chmod 644 $(LIBDIR)/$(LIBDATA)/*
-	@echo ""
-	mkdir $(LIBDIR)/$(LIBHYPH)
-	chmod 755 $(LIBDIR)/$(LIBHYPH)
-	cp hyph/* $(LIBDIR)/$(LIBHYPH)
-	chmod 644 $(LIBDIR)/$(LIBHYPH)/*
-	@echo ""
-	mkdir $(LIBDIR)/$(LIBFONT)
-	chmod 755 $(LIBDIR)/$(LIBFONT)
-	cp font/* $(LIBDIR)/$(LIBFONT)
-	chmod 644 $(LIBDIR)/$(LIBFONT)/*
-	@echo ""
-	mkdir $(LIBDIR)/$(LIBMAPS)
-	chmod 755 $(LIBDIR)/$(LIBMAPS)
-	cp maps/* $(LIBDIR)/$(LIBMAPS)
-	chmod 644 $(LIBDIR)/$(LIBMAPS)/*
-	@echo ""
-	mkdir $(LIBDIR)/$(LIBLOCA)
-	chmod 755 $(LIBDIR)/$(LIBLOCA)
-	@echo ""
-	@echo "(c) Initializing run (should be silent, no errors expected)"
-	$(BINDIR)/lout -x -s $(LIBDIR)/$(LIBINCL)/init
-	@echo ""
-	@echo "(d) Changing mode of files just created by initializing run"
-	chmod 644 $(LIBDIR)/$(LIBDATA)/*
-	chmod 644 $(LIBDIR)/$(LIBHYPH)/*
+	@echo "(a) Installing lout and prg2lout binaries into BINDIR $(DESTDIR)/$(BINDIR)"
+	strip lout
+	strip prg2lout
+	mkdir -p $(DESTDIR)/$(BINDIR)
+	cp lout $(DESTDIR)/$(BINDIR)/lout
+	chmod 755 $(DESTDIR)/$(BINDIR)/lout
+	cp prg2lout $(DESTDIR)/$(BINDIR)/prg2lout
+	chmod 755 $(DESTDIR)/$(BINDIR)/prg2lout
+	@echo ""
+	@echo "(b) Installing library files into LIBDIR $(DESTDIR)/$(LIBDIR)"
+	mkdir -p $(DESTDIR)/$(LIBDIR)
+	chmod 755 $(DESTDIR)/$(LIBDIR)
+	@echo ""
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBINCL)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBINCL)
+	cp include/* $(DESTDIR)/$(LIBDIR)/$(LIBINCL)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBINCL)/*
+	@echo ""
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBDATA)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBDATA)
+	cp data/* $(DESTDIR)/$(LIBDIR)/$(LIBDATA)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBDATA)/*
+	@echo ""
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBHYPH)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBHYPH)
+	cp hyph/* $(DESTDIR)/$(LIBDIR)/$(LIBHYPH)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBHYPH)/*
+	@echo ""
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBFONT)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBFONT)
+	cp font/* $(DESTDIR)/$(LIBDIR)/$(LIBFONT)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBFONT)/*
+	@echo ""
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBMAPS)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBMAPS)
+	cp maps/* $(DESTDIR)/$(LIBDIR)/$(LIBMAPS)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBMAPS)/*
+	@echo ""
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)
+#	@echo ""
+#	@echo "(c) Initializing run (should be silent, no errors expected)"
+#	$(DESTDIR)/$(BINDIR)/lout -x -s $(DESTDIR)/$(LIBDIR)/$(LIBINCL)/init
+#	@echo ""
+#	@echo "(d) Changing mode of files just created by initializing run"
+#	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBDATA)/*
+#	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBHYPH)/*
 
 installman:
 	@echo ""
-	@echo "Installing manual entries into MANDIR $(MANDIR)"
-	sed -e "s@<BINDIR>@$(BINDIR)@" -e "s@<LIBDIR>@$(LIBDIR)@"	\
-	    -e "s@<DOCDIR>@$(DOCDIR)@" -e "s@<MANDIR>@$(MANDIR)@"	\
-	man/lout.1 > $(MANDIR)/lout.1
-	chmod 644 $(MANDIR)/lout.1
-	cp man/prg2lout.1 $(MANDIR)/prg2lout.1
-	chmod 644 $(MANDIR)/prg2lout.1
+	@echo "Installing manual entries into MANDIR $(DESTDIR)/$(MANDIR)"
+	mkdir -p $(DESTDIR)/$(MANDIR)
+	sed -e "s@<BINDIR>@$(DESTDIR)/$(BINDIR)@" -e "s@<LIBDIR>@$(DESTDIR)/$(LIBDIR)@"	\
+	    -e "s@<DOCDIR>@$(DESTDIR)/$(DOCDIR)@" -e "s@<MANDIR>@$(DESTDIR)/$(MANDIR)@"	\
+	man/lout.1 > $(DESTDIR)/$(MANDIR)/lout.1
+	chmod 644 $(DESTDIR)/$(MANDIR)/lout.1
+	cp man/prg2lout.1 $(DESTDIR)/$(MANDIR)/prg2lout.1
+	chmod 644 $(DESTDIR)/$(MANDIR)/prg2lout.1
 
 installdoc:
 	@echo ""
-	@echo "Creating DOCDIR $(DOCDIR) and copying documentation into it"
-	$(RCOPY) doc $(DOCDIR)
-	chmod 755 $(DOCDIR)
-	chmod 755 $(DOCDIR)/*
-	chmod 644 $(DOCDIR)/*/*
+	@echo "Creating DOCDIR $(DESTDIR)/$(DOCDIR) and copying documentation into it"
+	mkdir -p $(DESTDIR)/$(DOCDIR)
+	chmod 755 $(DESTDIR)/$(DOCDIR)
+	$(RCOPY) doc $(DESTDIR)/$(DOCDIR)
+	chmod 755 $(DESTDIR)/$(DOCDIR)/doc
+	chmod 755 $(DESTDIR)/$(DOCDIR)/doc/*
+	chmod 644 $(DESTDIR)/$(DOCDIR)/doc/README
 
 installfr:
 	@echo ""
-	@echo "Putting French error messages into $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)"
-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)
-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)
-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
-	cp locale/msgs.fr $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/msgs.$(LOC_FR)
-	gencat $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/errors.$(LOC_FR)	\
-	       $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/msgs.$(LOC_FR)
-	chmod 644 $(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/*
+	@echo "Putting French error messages into $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)"
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES
+	cp locale/msgs.fr $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/msgs.$(LOC_FR)
+	gencat $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/errors.$(LOC_FR)	\
+	       $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/msgs.$(LOC_FR)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_FR)/LC_MESSAGES/*
 
 installde:
 	@echo ""
-	@echo "Putting German error messages into $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)"
-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)
-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)
-	mkdir $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
-	chmod 755 $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
-	cp locale/msgs.de $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/msgs.$(LOC_DE)
-	gencat $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/errors.$(LOC_DE)	\
-	       $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/msgs.$(LOC_DE)
-	chmod 644 $(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/*
+	@echo "Putting German error messages into $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)"
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)
+	mkdir -p $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
+	chmod 755 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES
+	cp locale/msgs.de $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/msgs.$(LOC_DE)
+	gencat $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/errors.$(LOC_DE)	\
+	       $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/msgs.$(LOC_DE)
+	chmod 644 $(DESTDIR)/$(LIBDIR)/$(LIBLOCA)/$(LOC_DE)/LC_MESSAGES/*
 
 uninstall:
 	-rm -f  $(BINDIR)/lout $(BINDIR)/prg2lout