diff options
Diffstat (limited to 'sys-libs/ncurses')
| -rw-r--r-- | sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild | 488 |
1 files changed, 488 insertions, 0 deletions
diff --git a/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild b/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild new file mode 100644 index 000000000000..a6358a7b4821 --- /dev/null +++ b/sys-libs/ncurses/ncurses-6.3_p20221203-r1.ebuild @@ -0,0 +1,488 @@ +# Copyright 1999-2022 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=7 + +VERIFY_SIG_OPENPGP_KEY_PATH="${BROOT}"/usr/share/openpgp-keys/thomasdickey.asc +inherit flag-o-matic toolchain-funcs multilib-minimal preserve-libs usr-ldscript verify-sig + +MY_PV="${PV:0:3}" +MY_P="${PN}-${MY_PV}" +DESCRIPTION="Console display library" +HOMEPAGE="https://www.gnu.org/software/ncurses/ https://invisible-island.net/ncurses/" +# Keep invisible-mirror.net here as some users reported 403 forbidden with invisible-island.net +SRC_URI=" + mirror://gnu/ncurses/${MY_P}.tar.gz + https://invisible-island.net/archives/${PN}/${MY_P}.tar.gz + https://invisible-mirror.net/archives/${PN}/${MY_P}.tar.gz + verify-sig? ( mirror://gnu/ncurses/${MY_P}.tar.gz.sig ) +" + +GENTOO_PATCH_DEV=sam +GENTOO_PATCH_PV=6.3_p20221203 +GENTOO_PATCH_NAME=${PN}-${GENTOO_PATCH_PV}-patches + +# Populated below in a loop. Do not add patches manually here. +UPSTREAM_PATCHES=() + +if [[ ${PV} == *_p* ]] ; then + # Sometimes, after releases, there's no megapatch available yet. + # + # From upstream README at e.g. https://invisible-island.net/archives/ncurses/6.3/: + # + # "At times (generally to mark a relatively stable point), I create a rollup + # patch, which consists of all changes from the release through the current date." + # + # Also, from https://lists.gnu.org/archive/html/bug-ncurses/2019-08/msg00039.html, + # the patches are considered to be acceptable to use after some testing. They + # are both for development but also bug fixes. + # + # This array should contain a list of all the snapshots since the last + # release if there's no megapatch available yet. + PATCH_DATES=( + 20211026 + 20211030 + 20211106 + 20211113 + 20211115 + 20211120 + 20211127 + 20211204 + 20211211 + 20211219 + 20211225 + 20220101 + 20220115 + 20220122 + 20220129 + 20220205 + 20220212 + 20220219 + 20220226 + 20220305 + 20220312 + 20220319 + 20220326 + 20220402 + 20220409 + 20220416 + 20220423 + 20220430 + 20220501 + 20220507 + 20220514 + 20220521 + 20220529 + 20220604 + 20220612 + 20220618 + 20220625 + 20220703 + 20220709 + 20220716 + 20220724 + 20220729 + 20220806 + 20220813 + 20220820 + 20220827 + 20220903 + 20220910 + 20220917 + 20220924 + 20221001 + 20221008 + 20221015 + 20221023 + 20221029 + 20221105 + 20221112 + 20221119 + 20221126 + + # Latest patch is just _pN = $(ver_cut 4) + $(ver_cut 4) + ) + + if [[ -z ${PATCH_DATES[@]} ]] ; then + SRC_URI+=" https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz" + SRC_URI+=" verify-sig? ( https://invisible-island.net/archives/${PN}/${PV/_p*}/${P/_p/-}.patch.sh.gz.asc" + + # If we have a rollup patch, use that instead of the individual ones. + UPSTREAM_PATCHES+=( "${WORKDIR}"/${P/_p/-}-patch.sh ) + else + patch_url= + my_patch_index= + + # We keep a bunch of mirrors here as we've had reports of invisible*.net + # being 403 forbidden for some users. + urls=( + "https://invisible-island.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" + "https://invisible-mirror.net/archives/${PN}/${PV/_p*}/${MY_P}-%s" + "https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${MY_P}-%s" + ) + + for ((my_patch_index=0; my_patch_index < "${#PATCH_DATES[@]}"; my_patch_index++)); do + for url in "${urls[@]}" ; do + patch_url="$(printf ${urls} ${PATCH_DATES[${my_patch_index}]}.patch.gz)" + SRC_URI+=" ${patch_url}" + SRC_URI+=" verify-sig? ( ${patch_url}.asc )" + done + + UPSTREAM_PATCHES+=( "${WORKDIR}"/${MY_P}-${PATCH_DATES[${my_patch_index}]}.patch ) + done + + unset patch_url + unset my_patch_index + unset urls + fi + + SRC_URI+=" https://dev.gentoo.org/~${GENTOO_PATCH_DEV}/distfiles/${CATEGORY}/${PN}/${GENTOO_PATCH_NAME}.tar.xz" +fi + +LICENSE="MIT" +# The subslot reflects the SONAME. +SLOT="0/6" +KEYWORDS="~alpha ~amd64 ~arm ~arm64 ~hppa ~ia64 ~loong ~m68k ~mips ~ppc ~ppc64 ~riscv ~s390 ~sparc ~x86 ~x64-cygwin ~amd64-linux ~x86-linux ~ppc-macos ~x64-macos ~sparc-solaris ~sparc64-solaris ~x64-solaris ~x86-solaris" +IUSE="ada +cxx debug doc gpm minimal profile split-usr +stack-realign static-libs test tinfo trace" +RESTRICT="!test? ( test )" + +DEPEND="gpm? ( sys-libs/gpm[${MULTILIB_USEDEP}] )" +# Block the older ncurses that installed all files w/SLOT=5, bug #557472 +RDEPEND="${DEPEND} + !<=sys-libs/ncurses-5.9-r4:5 + !<sys-libs/slang-2.3.2_pre23 + !<x11-terms/rxvt-unicode-9.06-r3 + !<x11-terms/st-0.6-r1" +BDEPEND="verify-sig? ( sec-keys/openpgp-keys-thomasdickey )" + +S="${WORKDIR}/${MY_P}" + +PATCHES=( + "${UPSTREAM_PATCHES[@]}" + + # When rebasing Gentoo's patchset, please use git from a clean + # src_prepare with upstream patches already applied. git am --reject + # the existing patchset and rebase as required. This makes it easier + # to manage future rebasing & adding new patches. + # + # For the same reasons, please include the original configure.in changes, + # NOT just the generated results! + "${WORKDIR}"/${GENTOO_PATCH_NAME} +) + +src_unpack() { + # Avoid trying to verify our own patchset tarball, there's no point + if use verify-sig ; then + local file + for file in ${A} ; do + if [[ ${file} == ${MY_P}.tar.gz ]] ; then + verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.sig + else + [[ ${file} == @(*${GENTOO_PATCH_NAME}.tar.xz|*.asc|*.sig) ]] && continue + + verify-sig_verify_detached "${DISTDIR}"/${file} "${DISTDIR}"/${file}.asc + fi + done + fi + + default +} + +src_configure() { + # bug #115036 + unset TERMINFO + + tc-export_build_env BUILD_{CC,CXX,CPP} + + # bug #214642 + BUILD_CPPFLAGS+=" -D_GNU_SOURCE" + + # Build the various variants of ncurses -- narrow, wide, and threaded. #510440 + # Order matters here -- we want unicode/thread versions to come last so that the + # binaries in /usr/bin support both wide and narrow. + # The naming is also important as we use these directly with filenames and when + # checking configure flags. + NCURSES_TARGETS=( + ncurses + ncursesw + ncursest + ncursestw + ) + + # When installing ncurses, we have to use a compatible version of tic. + # This comes up when cross-compiling, doing multilib builds, upgrading, + # or installing for the first time. Build a local copy of tic whenever + # the host version isn't available. bug #249363, bug #557598 + if ! has_version -b "~sys-libs/${P}:0" ; then + local lbuildflags="-static" + + # some toolchains don't quite support static linking + local dbuildflags="-Wl,-rpath,${WORKDIR}/lib" + case ${CHOST} in + *-darwin*) dbuildflags= ;; + *-solaris*) dbuildflags="-Wl,-R,${WORKDIR}/lib" ;; + esac + echo "int main() {}" | \ + $(tc-getCC) -o x -x c - ${lbuildflags} -pipe >& /dev/null \ + || lbuildflags="${dbuildflags}" + + # We can't re-use the multilib BUILD_DIR because we run outside of it. + BUILD_DIR="${WORKDIR}" \ + CC=${BUILD_CC} \ + CXX=${BUILD_CXX} \ + CPP=${BUILD_CPP} \ + CHOST=${CBUILD} \ + CFLAGS=${BUILD_CFLAGS} \ + CXXFLAGS=${BUILD_CXXFLAGS} \ + CPPFLAGS=${BUILD_CPPFLAGS} \ + LDFLAGS="${BUILD_LDFLAGS} ${lbuildflags}" \ + do_configure cross --without-shared --with-normal --with-progs + fi + multilib-minimal_src_configure +} + +multilib_src_configure() { + if [[ ${ABI} == x86 ]] ; then + # For compatibility with older binaries at slight performance cost. + # bug #616402 + use stack-realign && append-flags -mstackrealign + fi + + local t + for t in "${NCURSES_TARGETS[@]}" ; do + do_configure "${t}" + done +} + +do_configure() { + local target=$1 + shift + + mkdir "${BUILD_DIR}/${target}" || die + cd "${BUILD_DIR}/${target}" || die + + # https://lists.gnu.org/archive/html/bug-ncurses/2022-09/msg00024.html + export EGREP="grep -E" + export FGREP="grep -F" + + local conf=( + # We need the basic terminfo files in /etc, bug #37026. We will + # add '--with-terminfo-dirs' and then populate /etc/terminfo in + # src_install() ... + --with-terminfo-dirs="${EPREFIX}/etc/terminfo:${EPREFIX}/usr/share/terminfo" + + # Enable installation of .pc files. + --enable-pc-files + # This path is used to control where the .pc files are installed. + --with-pkg-config-libdir="${EPREFIX}/usr/$(get_libdir)/pkgconfig" + + # Now the rest of the various standard flags. + --with-shared + # (Originally disabled until bug #245417 is sorted out, but now + # just keeping it off for good, given nobody needed it until now + # (2022) and we're trying to phase out bdb.) + --without-hashed-db + $(use_with ada) + $(use_with cxx) + $(use_with cxx cxx-binding) + --with-cxx-shared + $(use_with debug) + $(use_with profile) + # The configure script uses ldd to parse the linked output which + # is flaky for cross-compiling/multilib/ldd versions/etc... + $(use_with gpm gpm libgpm.so.1) + # Required for building on mingw-w64, and possibly other windows + # platforms, bug #639670 + $(use_enable kernel_Winnt term-driver) + --disable-termcap + --enable-symlinks + --with-rcs-ids + --with-manpage-format=normal + --enable-const + --enable-colorfgbg + --enable-hard-tabs + --enable-echo + $(use_enable !ada warnings) + $(use_with debug assertions) + $(use_enable !debug leaks) + $(use_with debug expanded) + $(use_with !debug macros) + $(multilib_native_with progs) + $(use_with test tests) + $(use_with trace) + $(use_with tinfo termlib) + --disable-stripping + --disable-pkg-ldflags + ) + + if [[ ${target} == ncurses*w ]] ; then + conf+=( --enable-widec ) + else + conf+=( --disable-widec ) + fi + if [[ ${target} == ncursest* ]] ; then + conf+=( --with-{pthread,reentrant} ) + else + conf+=( --without-{pthread,reentrant} ) + fi + + # Make sure each variant goes in a unique location. + if [[ ${target} == "ncurses" ]] ; then + # "ncurses" variant goes into "${EPREFIX}"/usr/include + # It is needed on Prefix because the configure script appends + # "ncurses" to "${prefix}/include" if "${prefix}" is not /usr. + conf+=( --enable-overwrite ) + else + conf+=( --includedir="${EPREFIX}"/usr/include/${target} ) + fi + # See comments in src_configure. + if [[ ${target} != "cross" ]] ; then + local cross_path="${WORKDIR}/cross" + [[ -d ${cross_path} ]] && export TIC_PATH="${cross_path}/progs/tic" + fi + + ECONF_SOURCE="${S}" econf "${conf[@]}" "$@" +} + +src_compile() { + # See comments in src_configure. + if ! has_version -b "~sys-libs/${P}:0" ; then + # We could possibly merge these two branches but opting to be + # conservative when merging some of the Prefix changes. + + if [[ ${CHOST} == *-cygwin* ]] && ! multilib_is_native_abi ; then + # We make 'tic$(x)' here, for Cygwin having x=".exe". + BUILD_DIR="${WORKDIR}" \ + do_compile cross -C progs all PROGS='tic$(x)' + else + BUILD_DIR="${WORKDIR}" \ + do_compile cross -C progs tic + fi + fi + + multilib-minimal_src_compile +} + +multilib_src_compile() { + local t + for t in "${NCURSES_TARGETS[@]}" ; do + do_compile "${t}" + done +} + +do_compile() { + local target=$1 + shift + + cd "${BUILD_DIR}/${target}" || die + + # A little hack to fix parallel builds ... they break when + # generating sources so if we generate the sources first (in + # non-parallel), we can then build the rest of the package + # in parallel. This is not really a perf hit since the source + # generation is quite small. + emake -j1 sources + + # For some reason, sources depends on pc-files which depends on + # compiled libraries which depends on sources which ... + # Manually delete the pc-files file so the install step will + # create the .pc files we want. + rm -f misc/pc-files || die + emake "$@" +} + +multilib_src_install() { + local target + for target in "${NCURSES_TARGETS[@]}" ; do + emake -C "${BUILD_DIR}/${target}" DESTDIR="${D}" install + done + + # Move main libraries into /. + if multilib_is_native_abi ; then + gen_usr_ldscript -a \ + "${NCURSES_TARGETS[@]}" \ + $(usex tinfo 'tinfow tinfo' '') + fi + + # Don't delete '*.dll.a', needed for linking, bug #631468 + if ! use static-libs; then + find "${ED}"/usr/ -name '*.a' ! -name '*.dll.a' -delete || die + fi + + # Build fails to create this ... + # -FIXME- + # Ugly hackaround for riscv having two parts libdir (bug #689240) + # Replace this hack with an official solution once we have one... + # -FIXME- + dosym $(sed 's@[^/]\+@..@g' <<< $(get_libdir))/share/terminfo \ + /usr/$(get_libdir)/terminfo + + # Remove obsolete libcurses symlink that is created by the build + # system. Technically, this could be also achieved + # via --disable-overwrite but it also moves headers implicitly, + # and we do not want to do this yet. + # bug #836696 + rm "${ED}"/usr/$(get_libdir)/libcurses* || die +} + +multilib_src_install_all() { + local terms=( + # Dumb/simple values that show up when using the in-kernel VT. + ansi console dumb linux + vt{52,100,102,200,220} + # [u]rxvt users used to be pretty common. Probably should drop this + # since upstream is dead and people are moving away from it. + rxvt{,-unicode}{,-256color} + # xterm users are common, as is terminals re-using/spoofing it. + xterm xterm-{,256}color + # screen is common (and reused by tmux). + screen{,-256color} + screen.xterm-256color + ) + if use split-usr ; then + local x + # We need the basic terminfo files in /etc for embedded/recovery, bug #37026 + einfo "Installing basic terminfo files in /etc..." + for x in "${terms[@]}"; do + local termfile=$(find "${ED}"/usr/share/terminfo/ -name "${x}" 2>/dev/null) + local basedir=$(basename "$(dirname "${termfile}")") + + if [[ -n ${termfile} ]] ; then + dodir "/etc/terminfo/${basedir}" + mv "${termfile}" "${ED}/etc/terminfo/${basedir}/" || die + dosym "../../../../etc/terminfo/${basedir}/${x}" \ + "/usr/share/terminfo/${basedir}/${x}" + fi + done + + echo "CONFIG_PROTECT_MASK=\"/etc/terminfo\"" | newenvd - 50ncurses + + use minimal && rm -r "${ED}"/usr/share/terminfo* + # Because ncurses5-config --terminfo returns the directory we keep it + # bug #245374 + keepdir /usr/share/terminfo + elif use minimal ; then + # Keep only the basic terminfo files + find "${ED}"/usr/share/terminfo/ \ + -type f ${terms[*]/#/! -name } -delete , \ + -type d -empty -delete || die + fi + + cd "${S}" || die + dodoc ANNOUNCE MANIFEST NEWS README* TO-DO doc/*.doc + if use doc ; then + docinto html + dodoc -r doc/html/ + fi +} + +pkg_preinst() { + preserve_old_lib /$(get_libdir)/libncurses.so.5 + preserve_old_lib /$(get_libdir)/libncursesw.so.5 +} + +pkg_postinst() { + preserve_old_lib_notify /$(get_libdir)/libncurses.so.5 + preserve_old_lib_notify /$(get_libdir)/libncursesw.so.5 +} |