diff options
Diffstat (limited to 'net-print/hplip/hplip-3.22.6.ebuild')
| -rw-r--r-- | net-print/hplip/hplip-3.22.6.ebuild | 290 |
1 files changed, 290 insertions, 0 deletions
diff --git a/net-print/hplip/hplip-3.22.6.ebuild b/net-print/hplip/hplip-3.22.6.ebuild new file mode 100644 index 000000000000..5ea1e6ba436f --- /dev/null +++ b/net-print/hplip/hplip-3.22.6.ebuild @@ -0,0 +1,290 @@ +# Copyright 1999-2023 Gentoo Authors +# Distributed under the terms of the GNU General Public License v2 + +EAPI=8 + +PYTHON_COMPAT=( python3_{9,10} ) +PYTHON_REQ_USE="threads(+),xml(+)" + +inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev + +DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools" +HOMEPAGE="https://developers.hp.com/hp-linux-imaging-and-printing" +SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz + https://dev.gentoo.org/~billie/distfiles/${PN}-3.22.6-patches-1.tar.xz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="amd64 arm arm64 ppc ppc64 x86" + +IUSE="doc fax +hpcups hpijs kde libnotify libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X" + +COMMON_DEPEND=" + net-print/cups + sys-apps/dbus + virtual/jpeg:0 + hpijs? ( net-print/cups-filters[foomatic] ) + !libusb0? ( virtual/libusb:1 ) + libusb0? ( virtual/libusb:0 ) + ${PYTHON_DEPS} + !minimal? ( + scanner? ( + media-gfx/sane-backends + ) + snmp? ( + dev-libs/openssl:0= + net-analyzer/net-snmp:= + net-dns/avahi[dbus,python,${PYTHON_SINGLE_USEDEP}] + ) + ) +" +BDEPEND=" + virtual/pkgconfig +" +DEPEND=" + ${COMMON_DEPEND} +" +RDEPEND=" + ${COMMON_DEPEND} + app-text/ghostscript-gpl + !minimal? ( + $(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_USEDEP}]' 'python3*') + kernel_linux? ( virtual/udev ) + $(python_gen_cond_dep ' + >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}] + dev-python/distro[${PYTHON_USEDEP}] + fax? ( dev-python/reportlab[${PYTHON_USEDEP}] ) + qt5? ( + >=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_USEDEP}] + libnotify? ( dev-python/notify2[${PYTHON_USEDEP}] ) + ) + scanner? ( + >=dev-python/reportlab-3.2[${PYTHON_USEDEP}] + >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}] + X? ( + || ( + kde? ( kde-misc/skanlite ) + media-gfx/xsane + media-gfx/sane-frontends + ) + ) + ) + ') + ) + policykit? ( sys-auth/polkit ) +" + +REQUIRED_USE="${PYTHON_REQUIRED_USE}" + +PATCHES=( + "${WORKDIR}/patches" +) + +CONFIG_CHECK="~PARPORT ~PPDEV" +ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)." + +#DISABLE_AUTOFORMATTING="yes" +DOC_CONTENTS=" +For more information on setting up your printer please take +a look at the hplip section of the gentoo printing guide: +https://wiki.gentoo.org/wiki/Printing +" + +pkg_setup() { + python-single-r1_pkg_setup + + use scanner && ! use X && ewarn "You need USE=X for the scanner GUI." + + use parport && linux-info_pkg_setup + + if use minimal ; then + ewarn "Installing driver portions only, make sure you know what you are doing." + ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver" + ewarn "is installed. If both USE flags are set hpijs overrides hpcups." + ewarn "This also disables fax, network, scanner and gui support!" + fi + + if ! use hpcups && ! use hpijs ; then + ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver," + ewarn "which is probably not what you want." + ewarn "You will almost certainly not be able to print." + fi +} + +src_prepare() { + default + + python_fix_shebang . + + # Make desktop files follow the specification + # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680 + # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324 + sed -i -e '/^Categories=/s/Application;//' \ + -e '/^Encoding=.*/d' hplip.desktop.in || die + sed -i -e '/^Categories=/s/Application;//' \ + -e '/^Version=.*/d' \ + -e '/^Comment=.*/d' hplip-systray.desktop.in || die + + # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725 + # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847, + # https://bugs.launchpad.net/hplip/+bug/500086 + local udevdir=$(get_udevdir) + sed -i -e "s|/etc/udev|${udevdir}|g" \ + $(find . -type f -exec grep -l /etc/udev {} +) || die + + # Force recognition of Gentoo distro by hp-check + sed -i \ + -e "s:file('/etc/issue', 'r').read():'Gentoo':" \ + installer/core_install.py || die + + eautoreconf +} + +src_configure() { + local drv_build minimal_build + + if use hpcups ; then + drv_build="$(use_enable hpcups hpcups-install)" + if use static-ppds ; then + drv_build="${drv_build} --enable-cups-ppd-install" + drv_build="${drv_build} --disable-cups-drv-install" + else + drv_build="${drv_build} --enable-cups-drv-install" + drv_build="${drv_build} --disable-cups-ppd-install" + fi + else + drv_build="--disable-hpcups-install" + drv_build="${drv_build} --disable-cups-drv-install" + drv_build="${drv_build} --disable-cups-ppd-install" + fi + + if use hpijs ; then + drv_build="${drv_build} $(use_enable hpijs hpijs-install)" + if use static-ppds ; then + drv_build="${drv_build} --enable-foomatic-ppd-install" + drv_build="${drv_build} --disable-foomatic-drv-install" + else + drv_build="${drv_build} --enable-foomatic-drv-install" + drv_build="${drv_build} --disable-foomatic-ppd-install" + fi + else + drv_build="${drv_build} --disable-hpijs-install" + drv_build="${drv_build} --disable-foomatic-drv-install" + drv_build="${drv_build} --disable-foomatic-ppd-install" + fi + + if use minimal ; then + if use hpijs ; then + minimal_build="--enable-hpijs-only-build" + else + minimal_build="--disable-hpijs-only-build" + fi + if use hpcups ; then + minimal_build="${minimal_build} --enable-hpcups-only-build" + else + minimal_build="${minimal_build} --disable-hpcups-only-build" + fi + minimal_build="${minimal_build} --disable-fax-build" + minimal_build="${minimal_build} --disable-network-build" + minimal_build="${minimal_build} --disable-scan-build" + minimal_build="${minimal_build} --disable-gui-build" + else + if use fax ; then + minimal_build="${minimal_build} --enable-fax-build" + else + minimal_build="${minimal_build} --disable-fax-build" + fi + if use snmp ; then + minimal_build="${minimal_build} --enable-network-build" + else + minimal_build="${minimal_build} --disable-network-build" + fi + if use scanner ; then + minimal_build="${minimal_build} --enable-scan-build" + else + minimal_build="${minimal_build} --disable-scan-build" + fi + if use qt5 ; then + minimal_build="${minimal_build} --enable-qt5" + minimal_build="${minimal_build} --enable-gui-build" + else + minimal_build="${minimal_build} --disable-gui-build" + minimal_build="${minimal_build} --disable-qt5" + fi + fi + + # disable class driver for now + econf \ + --disable-class-driver \ + --disable-cups11-build \ + --disable-foomatic-rip-hplip-install \ + --disable-imageProcessor-build \ + --disable-lite-build \ + --disable-shadow-build \ + --disable-qt3 \ + --disable-qt4 \ + --disable-udev_sysfs_rules \ + --with-cupsbackenddir=$(cups-config --serverbin)/backend \ + --with-cupsfilterdir=$(cups-config --serverbin)/filter \ + --with-docdir=/usr/share/doc/${PF} \ + --with-htmldir=/usr/share/doc/${PF}/html \ + --enable-hpps-install \ + --enable-dbus-build \ + ${drv_build} \ + ${minimal_build} \ + $(use_enable doc doc-build) \ + $(use_enable libusb0 libusb01_build) \ + $(use_enable parport pp-build) \ + $(use_enable policykit) + + # hpijs ppds are created at configure time but are not installed (3.17.11) + + # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip + # The hpcups driver does not use foomatic-rip + #local i + #for i in ppd/hpijs/*.ppd.gz ; do + # rm -f ${i}.temp || die + # gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \ + # gzip > ${i}.temp || die + # mv ${i}.temp ${i} || die + #done +} + +src_install() { + # Disable parallel install + # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018 + emake -j1 DESTDIR="${D}" install + einstalldocs + # default + + # Installed by sane-backends + # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023 + rm -f "${ED}"/etc/sane.d/dll.conf || die + + # Remove desktop and autostart files + # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=638770 + use qt5 || { + rm -Rf "${ED}"/usr/share/applications "${ED}"/etc/xdg + } + + rm -f "${ED}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die + rmdir --ignore-fail-on-non-empty "${ED}"/usr/share/doc/${PF}/ || die + + # Remove hal fdi files + rm -rf "${ED}"/usr/share/hal || die + + find "${D}" -name '*.la' -delete || die + + python_optimize "${ED}"/usr/share/hplip + + readme.gentoo_create_doc +} + +pkg_postinst() { + udev_reload + readme.gentoo_print_elog +} + +pkg_postrm() { + udev_reload +} |