diff options
Diffstat (limited to 'devices/dcontrib.mak')
| -rw-r--r-- | devices/dcontrib.mak | 1058 |
1 files changed, 1058 insertions, 0 deletions
diff --git a/devices/dcontrib.mak b/devices/dcontrib.mak new file mode 100644 index 00000000..975c68bd --- /dev/null +++ b/devices/dcontrib.mak @@ -0,0 +1,1058 @@ +# Copyright (C) 2001-2020 Artifex Software, Inc. +# All Rights Reserved. +# +# This software is provided AS-IS with no warranty, either express or +# implied. +# +# This software is distributed under license and may not be copied, +# modified or distributed except as expressly authorized under the terms +# of the license contained in the file LICENSE in this distribution. +# +# Refer to licensing information at http://www.artifex.com or contact +# Artifex Software, Inc., 1305 Grant Avenue - Suite 200, Novato, +# CA 94945, U.S.A., +1(415)492-9861, for further information. +# +# +# makefile for contributed device drivers. + +# Define the name of this makefile. +DCONTRIB_MAK=$(DEVSRC)dcontrib.mak $(TOP_MAKEFILES) + +###### --------------------------- Catalog -------------------------- ###### + +# The following drivers are user-contributed, and maintained (if at all) by +# users. Please report problems in these drivers to their authors, whose +# e-mail addresses appear below: do not report them to mailing lists or +# mailboxes for general Ghostscript problems. + +# Displays: +# MS-DOS (note: not usable with Desqview/X): +# pe Private Eye display +# Unix and VMS: +# sonyfb Sony Microsystems monochrome display [Sony only] +# Printers: +# ap3250 Epson AP3250 printer +# bj10e Canon BubbleJet BJ10e +# bj200 Canon BubbleJet BJ200; also good for BJ300 in ProPrinter mode +# (see comments in source code) +# bjc600 Canon Color BubbleJet BJC-600, BJC-4000 and BJC-70 +# also good for Apple printers like the StyleWriter 2x00 +# bjc800 Canon Color BubbleJet BJC-800 +# ccr CalComp Raster format +# cdeskjet H-P DeskJet 500C with 1 bit/pixel color +# cdjcolor H-P DeskJet 500C with 24 bit/pixel color and +# high-quality color (Floyd-Steinberg) dithering; +# also good for DeskJet 540C and Citizen Projet IIc (-r200x300) +# cdjmono H-P DeskJet 500C printing black only; +# also good for DeskJet 510, 520, and 540C (black only) +# cdj500 H-P DeskJet 500C (same as cdjcolor) +# cdj550 H-P DeskJet 550C/560C/660C/660Cse +# cljet5 H-P Color LaserJet 5/5M (see below for some notes) +# cljet5c H-P Color LaserJet 5/5M (see below for some notes) +# coslw2p CoStar LabelWriter II II/Plus +# coslwxl CoStar LabelWriter XL +# declj250 alternate DEC LJ250 driver +# djet500c H-P DeskJet 500C alternate driver +# (does not work on 550C or 560C) +# dnj650c H-P DesignJet 650C +# epson Epson-compatible dot matrix printers (9- or 24-pin) +# eps9mid Epson-compatible 9-pin, interleaved lines +# (intermediate resolution) +# eps9high Epson-compatible 9-pin, interleaved lines +# (triple resolution) +# epsonc Epson LQ-2550 and Fujitsu 3400/2400/1200 color printers +# hl7x0 Brother HL 720 and HL 730 (HL 760 is PCL compliant); +# also usable with the MFC6550MC Fax Machine. +# ibmpro IBM 9-pin Proprinter +# imagen Imagen ImPress printers +# jetp3852 IBM Jetprinter ink-jet color printer (Model #3852) +# lbp8 Canon LBP-8II laser printer +# lips3 Canon LIPS III laser printer in English (CaPSL) mode +# lj250 DEC LJ250 Companion color printer +# lj3100sw H-P LaserJet 3100 (requires installed HP-Software) +# lj4dith H-P LaserJet 4 with Floyd-Steinberg dithering +# lp8000 Epson LP-8000 laser printer +# lq850 Epson LQ850 printer at 360 x 360 DPI resolution; +# also good for Canon BJ300 with LQ850 emulation +# lxm5700m Lexmark 5700 monotone +# m8510 C.Itoh M8510 printer +# necp6 NEC P6/P6+/P60 printers at 360 x 360 DPI resolution +# nwp533 Sony Microsystems NWP533 laser printer [Sony only] +# oki182 Okidata MicroLine 182 +# okiibm Okidata MicroLine IBM-compatible printers +# paintjet alternate H-P PaintJet color printer +# photoex Epson Stylus Color Photo, Photo EX, Photo 700 +# pj H-P PaintJet XL driver +# pjetxl alternate H-P PaintJet XL driver +# pjxl H-P PaintJet XL color printer +# pjxl300 H-P PaintJet XL300 color printer; +# also good for PaintJet 1200C and CopyJet +# r4081 Ricoh 4081 laser printer +# sj48 StarJet 48 inkjet printer +# st800 Epson Stylus 800 printer +# stcolor Epson Stylus Color +# t4693d2 Tektronix 4693d color printer, 2 bits per R/G/B component +# t4693d4 Tektronix 4693d color printer, 4 bits per R/G/B component +# t4693d8 Tektronix 4693d color printer, 8 bits per R/G/B component +# tek4696 Tektronix 4695/4696 inkjet plotter +# uniprint Unified printer driver -- Configurable Color ESC/P-, +# ESC/P2-, HP-RTL/PCL mono/color driver +# Fax systems: +# cfax SFF format for CAPI fax interface +# dfaxhigh DigiBoard, Inc.'s DigiFAX software format (high resolution) +# dfaxlow DigiFAX low (normal) resolution +# Other raster file formats and devices: +# cif CIF file format for VLSI +# inferno Inferno bitmaps +# mgrmono 1-bit monochrome MGR devices +# mgrgray2 2-bit gray scale MGR devices +# mgrgray4 4-bit gray scale MGR devices +# mgrgray8 8-bit gray scale MGR devices +# mgr4 4-bit (VGA) color MGR devices +# mgr8 8-bit color MGR devices + +# If you add drivers, it would be nice if you kept each list +# in alphabetical order. + +###### ----------------------- End of catalog ----------------------- ###### + +###### ------------------- MS-DOS display devices ------------------- ###### + +### ---------------------- The Private Eye display ---------------------- ### +### Note: this driver was contributed by a user: ### +### please contact narf@media-lab.media.mit.edu if you have questions. ### + +pe_=$(DEVOBJ)gdevpe.$(OBJ) +$(DD)pe.dev : $(pe_) $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETDEV) $(DD)pe $(pe_) + +$(DEVOBJ)gdevpe.$(OBJ) : $(DEVSRC)gdevpe.c $(GDEV) $(memory__h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevpe.$(OBJ) $(C_) $(DEVSRC)gdevpe.c + +###### ----------------------- Other displays ------------------------ ###### + +### ------------------- Sony NeWS frame buffer device ------------------ ### +### Note: this driver was contributed by a user: please contact ### +### Mike Smolenski (mike@intertech.com) if you have questions. ### + +# This is implemented as a 'printer' device. +sonyfb_=$(DEVOBJ)gdevsnfb.$(OBJ) +$(DD)sonyfb.dev : $(sonyfb_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)sonyfb $(sonyfb_) + +$(DEVOBJ)gdevsnfb.$(OBJ) : $(DEVSRC)gdevsnfb.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevsnfb.$(OBJ) $(C_) $(DEVSRC)gdevsnfb.c + +###### --------------- Memory-buffered printer devices --------------- ###### + +### ------------ The Canon BubbleJet BJ10e and BJ200 devices ------------ ### + +bj10e_=$(DEVOBJ)gdevbj10.$(OBJ) + +$(DD)bj10e.dev : $(bj10e_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)bj10e $(bj10e_) + +$(DD)bj200.dev : $(bj10e_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)bj200 $(bj10e_) + +$(DEVOBJ)gdevbj10.$(OBJ) : $(DEVSRC)gdevbj10.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevbj10.$(OBJ) $(C_) $(DEVSRC)gdevbj10.c + +### ------------- The CalComp Raster Format ----------------------------- ### +### Note: this driver was contributed by a user: please contact ### +### Ernst Muellner (ernst.muellner@oenzl.siemens.de) if you have ### +### questions. ### + +ccr_=$(DEVOBJ)gdevccr.$(OBJ) +$(DD)ccr.dev : $(ccr_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)ccr $(ccr_) + +$(DEVOBJ)gdevccr.$(OBJ) : $(DEVSRC)gdevccr.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevccr.$(OBJ) $(C_) $(DEVSRC)gdevccr.c + +### The H-P DeskJet, PaintJet, and DesignJet family color printer devices.### +### Note: there are two different 500C drivers, both contributed by users.### +### If you have questions about the djet500c driver, ### +### please contact AKayser@et.tudelft.nl. ### +### If you have questions about the cdj* drivers, ### +### please contact g.cameron@biomed.abdn.ac.uk. ### +### If you have questions about the dnj560c driver, ### +### please contact koert@zen.cais.com. ### +### If you have questions about the lj4dith driver, ### +### please contact Eckhard.Rueggeberg@ts.go.dlr.de. ### +### The BJC600/BJC4000, BJC800, and ESCP were originally contributed ### +### by yves.arrouye@usa.net, but he no longer answers questions ### +### about them. ### + +cdeskjet_=$(DEVOBJ)gdevcdj.$(OBJ) $(HPPCL) + +$(DD)cdeskjet.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cdeskjet $(cdeskjet_) + +$(DD)cdjcolor.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cdjcolor $(cdeskjet_) + +$(DD)cdjmono.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cdjmono $(cdeskjet_) + +$(DD)cdj500.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cdj500 $(cdeskjet_) + +$(DD)cdj550.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cdj550 $(cdeskjet_) + +$(DD)declj250.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)declj250 $(cdeskjet_) + +$(DD)dnj650c.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)dnj650c $(cdeskjet_) + +$(DD)lj4dith.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lj4dith $(cdeskjet_) + +$(DD)pj.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)pj $(cdeskjet_) + +$(DD)pjxl.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)pjxl $(cdeskjet_) + +# Note: the pjxl300 driver also works for the CopyJet. +$(DD)pjxl300.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)pjxl300 $(cdeskjet_) + +# Note: the BJC600 driver also works for the BJC4000. +$(DD)bjc600.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)bjc600 $(cdeskjet_) + +$(DD)bjc800.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)bjc800 $(cdeskjet_) + +$(DD)escp.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)escp $(cdeskjet_) + +# NB: you can also customise the build if required, using +# -DBitsPerPixel=<number> if you wish the default to be other than 24 +# for the generic drivers (cdj500, cdj550, pjxl300, pjtest, pjxltest). + +gdevbjc_h=$(DEVSRC)gdevbjc.h + +$(DEVOBJ)gdevcdj.$(OBJ) : $(DEVSRC)gdevcdj.c $(std_h) $(PDEVH)\ + $(gsparam_h) $(gsstate_h) $(gxlum_h)\ + $(gdevbjc_h) $(gdevpcl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevcdj.$(OBJ) $(C_) $(DEVSRC)gdevcdj.c + +djet500c_=$(DEVOBJ)gdevdjtc.$(OBJ) $(HPPCL) +$(DD)djet500c.dev : $(djet500c_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)djet500c $(djet500c_) + +$(DEVOBJ)gdevdjtc.$(OBJ) : $(DEVSRC)gdevdjtc.c $(PDEVH) $(malloc__h) $(gdevpcl_h) \ + $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevdjtc.$(OBJ) $(C_) $(DEVSRC)gdevdjtc.c + +### -------------------- The H-P Color LaserJet 5/5M -------------------- ### + +### There are two different drivers for this device. +### For questions about the cljet5/cljet5pr (more general) driver, contact +### Jan Stoeckenius <jan@orimp.com> +### For questions about the cljet5c (simple) driver, contact +### Henry Stiles <henrys@meerkat.dimensional.com> +### Note that this is a long-edge-feed device, so the default page size is +### wider than it is high. To print portrait pages, specify the page size +### explicitly, e.g. -c letter or -c a4 on the command line. + +cljet5_=$(DEVOBJ)gdevclj.$(OBJ) $(HPPCL) + +$(DD)cljet5.dev : $(DEVS_MAK) $(cljet5_) $(GLD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cljet5 $(cljet5_) + +# The cljet5pr driver has hacks for trying to handle page rotation. +# The hacks only work with one special PCL interpreter. Don't use it! +$(DD)cljet5pr.dev : $(DEVS_MAK) $(cljet5_) $(GLD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cljet5pr $(cljet5_) + +$(DEVOBJ)gdevclj.$(OBJ) : $(DEVSRC)gdevclj.c $(math__h) $(PDEVH)\ + $(gx_h) $(gsparam_h) $(gdevpcl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevclj.$(OBJ) $(C_) $(DEVSRC)gdevclj.c + +cljet5c_=$(DEVOBJ)gdevcljc.$(OBJ) $(HPPCL) +$(DD)cljet5c.dev : $(DEVS_MAK) $(cljet5c_) $(GLD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cljet5c $(cljet5c_) + +$(DEVOBJ)gdevcljc.$(OBJ) : $(DEVSRC)gdevcljc.c $(math__h) $(PDEVH) $(gdevpcl_h) \ + $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevcljc.$(OBJ) $(C_) $(DEVSRC)gdevcljc.c + +### --------------- The H-P LaserJet 3100 software device --------------- ### + +### NOTE: This driver requires installed HP-Software to print. ### +### It can be used with smbclient to print from an UNIX box to a ### +### LaserJet 3100 printer attached to a MS-Windows box. ### +### NOTE: this driver was contributed by a user: please contact ### +### Ulrich Schmid (uschmid@mail.hh.provi.de) if you have questions. ### + +lj3100sw_=$(DEVOBJ)gdevl31s.$(OBJ) $(DEVOBJ)gdevmeds.$(OBJ) +$(DD)lj3100sw.dev : $(lj3100sw_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lj3100sw $(lj3100sw_) + +gdevmeds_h=$(DEVSRC)gdevmeds.h + +$(DEVOBJ)gdevl31s.$(OBJ) : $(DEVSRC)gdevl31s.c $(gdevmeds_h) $(PDEVH) \ + $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevl31s.$(OBJ) $(C_) $(DEVSRC)gdevl31s.c + +$(DEVOBJ)gdevmeds.$(OBJ) : $(DEVSRC)gdevmeds.c $(AK) $(gdevmeds_h) \ + $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevmeds.$(OBJ) $(C_) $(DEVSRC)gdevmeds.c + +### ------ CoStar LabelWriter II II/Plus device ------ ### +### Contributed by Mike McCauley mikem@open.com.au ### + +coslw_=$(DEVOBJ)gdevcslw.$(OBJ) + +$(DD)coslw2p.dev : $(coslw_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)coslw2p $(coslw_) + +$(DD)coslwxl.dev : $(coslw_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)coslwxl $(coslw_) + +$(DEVOBJ)gdevcslw.$(OBJ) : $(DEVSRC)gdevcslw.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevcslw.$(OBJ) $(C_) $(DEVSRC)gdevcslw.c + +### ----------------- The generic Epson printer device ----------------- ### +### Note: most of this code was contributed by users. Please contact ### +### the following people if you have questions: ### +### eps9mid - Guenther Thomsen (thomsen@cs.tu-berlin.de) ### +### eps9high - David Wexelblat (dwex@mtgzfs3.att.com) ### +### ibmpro - James W. Birdsall (jwbirdsa@picarefy.picarefy.com) ### + +epson_=$(DEVOBJ)gdevepsn.$(OBJ) + +$(DD)epson.dev : $(epson_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)epson $(epson_) + +$(DD)eps9mid.dev : $(epson_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)eps9mid $(epson_) + +$(DD)eps9high.dev : $(epson_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)eps9high $(epson_) + +$(DEVOBJ)gdevepsn.$(OBJ) : $(DEVSRC)gdevepsn.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevepsn.$(OBJ) $(C_) $(DEVSRC)gdevepsn.c + +### ----------------- The IBM Proprinter printer device ---------------- ### + +$(DD)ibmpro.dev : $(epson_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)ibmpro $(epson_) + +### -------------- The Epson LQ-2550 color printer device -------------- ### +### Note: this driver was contributed by users: please contact ### +### Dave St. Clair (dave@exlog.com) if you have questions. ### + +epsonc_=$(DEVOBJ)gdevepsc.$(OBJ) +$(DD)epsonc.dev : $(epsonc_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)epsonc $(epsonc_) + +$(DEVOBJ)gdevepsc.$(OBJ) : $(DEVSRC)gdevepsc.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevepsc.$(OBJ) $(C_) $(DEVSRC)gdevepsc.c + +### ------------- The Epson ESC/P 2 language printer devices ------------- ### +### Note: these drivers were contributed by users. ### +### For questions about the Stylus 800 and AP3250 drivers, please contact ### +### Richard Brown (rab@tauon.ph.unimelb.edu.au). ### +### For questions about the Stylus Color drivers, please contact ### +### Gunther Hess (gunther@elmos.de). ### + +ESCP2=$(DEVOBJ)gdevescp.$(OBJ) + +$(DEVOBJ)gdevescp.$(OBJ) : $(DEVSRC)gdevescp.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevescp.$(OBJ) $(C_) $(DEVSRC)gdevescp.c + +$(DD)ap3250.dev : $(ESCP2) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)ap3250 $(ESCP2) + +$(DD)st800.dev : $(ESCP2) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)st800 $(ESCP2) + +stcolor1_=$(DEVOBJ)gdevstc.$(OBJ) $(DEVOBJ)gdevstc1.$(OBJ) $(DEVOBJ)gdevstc2.$(OBJ) +stcolor2_=$(DEVOBJ)gdevstc3.$(OBJ) $(DEVOBJ)gdevstc4.$(OBJ) +$(DD)stcolor.dev : $(stcolor1_) $(stcolor2_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)stcolor $(stcolor1_) + $(ADDMOD) $(DD)stcolor -obj $(stcolor2_) + +gdevstc_h=$(DEVSRC)gdevstc.h + +$(DEVOBJ)gdevstc.$(OBJ) : $(DEVSRC)gdevstc.c $(gdevstc_h) $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevstc.$(OBJ) $(C_) $(DEVSRC)gdevstc.c + +$(DEVOBJ)gdevstc1.$(OBJ) : $(DEVSRC)gdevstc1.c $(gdevstc_h) $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevstc1.$(OBJ) $(C_) $(DEVSRC)gdevstc1.c + +$(DEVOBJ)gdevstc2.$(OBJ) : $(DEVSRC)gdevstc2.c $(gdevstc_h) $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevstc2.$(OBJ) $(C_) $(DEVSRC)gdevstc2.c + +$(DEVOBJ)gdevstc3.$(OBJ) : $(DEVSRC)gdevstc3.c $(gdevstc_h) $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevstc3.$(OBJ) $(C_) $(DEVSRC)gdevstc3.c + +$(DEVOBJ)gdevstc4.$(OBJ) : $(DEVSRC)gdevstc4.c $(gdevstc_h) $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevstc4.$(OBJ) $(C_) $(DEVSRC)gdevstc4.c + +### --------------- Ugly/Update -> Unified Printer Driver ---------------- ### +### For questions about this driver, please contact: ### +### Gunther Hess (gunther@elmos.de) ### + +uniprint_=$(DEVOBJ)gdevupd.$(OBJ) +$(DD)uniprint.dev : $(uniprint_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)uniprint $(uniprint_) + +$(DEVOBJ)gdevupd.$(OBJ) : $(DEVSRC)gdevupd.c $(PDEVH) $(gsparam_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevupd.$(OBJ) $(C_) $(DEVSRC)gdevupd.c + +### ------------ The H-P PaintJet color printer device ----------------- ### +### Note: this driver also supports the DEC LJ250 color printer, which ### +### has a PaintJet-compatible mode, and the PaintJet XL. ### +### If you have questions about the XL, please contact Rob Reiss ### +### (rob@moray.berkeley.edu). ### + +PJET=$(DEVOBJ)gdevpjet.$(OBJ) $(HPPCL) + +$(DEVOBJ)gdevpjet.$(OBJ) : $(DEVSRC)gdevpjet.c $(PDEVH) $(gdevpcl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevpjet.$(OBJ) $(C_) $(DEVSRC)gdevpjet.c + +$(DD)lj250.dev : $(PJET) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lj250 $(PJET) + +$(DD)paintjet.dev : $(PJET) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)paintjet $(PJET) + +$(DD)pjetxl.dev : $(PJET) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)pjetxl $(PJET) + +###--------------------- The Brother HL 7x0 printer --------------------- ### +### Note: this driver was contributed by users: please contact ### +### Pierre-Olivier Gaillard (pierre.gaillard@hol.fr) ### +### for questions about the basic driver; ### +### Ross Martin (ross@ross.interwrx.com, martin@walnut.eas.asu.edu) ### +### for questions about usage with the MFC6550MC Fax Machine. ### + +hl7x0_=$(DEVOBJ)gdevhl7x.$(OBJ) +$(DD)hl7x0.dev : $(hl7x0_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)hl7x0 $(hl7x0_) + +$(DEVOBJ)gdevhl7x.$(OBJ) : $(DEVSRC)gdevhl7x.c $(PDEVH) $(gdevpcl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevhl7x.$(OBJ) $(C_) $(DEVSRC)gdevhl7x.c + +### -------------- Imagen ImPress Laser Printer device ----------------- ### +### Note: this driver was contributed by a user: please contact ### +### Alan Millar (AMillar@bolis.sf-bay.org) if you have questions. ### +### Set USE_BYTE_STREAM if using parallel interface; ### +### Don't set it if using 'ipr' spooler (default). ### +### You may also add -DA4 if needed for A4 paper. ### + +imagen_=$(DEVOBJ)gdevimgn.$(OBJ) +$(DD)imagen.dev : $(imagen_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)imagen $(imagen_) + +# Uncomment the first line for the ipr spooler, the second line for parallel. +IMGN_OPT= +#IMGN_OPT=-DUSE_BYTE_STREAM +$(DEVOBJ)gdevimgn.$(OBJ) : $(DEVSRC)gdevimgn.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(IMGN_OPT) $(DEVO_)gdevimgn.$(OBJ) $(C_) $(DEVSRC)gdevimgn.c + +### ------- The IBM 3852 JetPrinter color inkjet printer device -------- ### +### Note: this driver was contributed by users: please contact ### +### Kevin Gift (kgift@draper.com) if you have questions. ### +### Note that the paper size that can be addressed by the graphics mode ### +### used in this driver is fixed at 7-1/2 inches wide (the printable ### +### width of the jetprinter itself.) ### + +jetp3852_=$(DEVOBJ)gdev3852.$(OBJ) +$(DD)jetp3852.dev : $(jetp3852_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)jetp3852 $(jetp3852_) + +$(DEVOBJ)gdev3852.$(OBJ) : $(DEVSRC)gdev3852.c $(PDEVH) $(gdevpcl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdev3852.$(OBJ) $(C_) $(DEVSRC)gdev3852.c + +### ---------- The Canon LBP-8II and LIPS III printer devices ---------- ### +### Note: these drivers were contributed by users. ### +### For questions about these drivers, please contact ### +### Lauri Paatero, lauri.paatero@paatero.pp.fi ### + +lbp8_=$(DEVOBJ)gdevlbp8.$(OBJ) +$(DD)lbp8.dev : $(lbp8_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lbp8 $(lbp8_) + +$(DD)lips3.dev : $(lbp8_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lips3 $(lbp8_) + +$(DEVOBJ)gdevlbp8.$(OBJ) : $(DEVSRC)gdevlbp8.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevlbp8.$(OBJ) $(C_) $(DEVSRC)gdevlbp8.c + +### -------------- The Epson LP-8000 laser printer device -------------- ### +### Note: this driver was contributed by a user: please contact Oleg ### +### Oleg Fat'yanov <faty1@rlem.titech.ac.jp> if you have questions.### + +lp8000_=$(DEVOBJ)gdevlp8k.$(OBJ) +$(DD)lp8000.dev : $(lp8000_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lp8000 $(lp8000_) + +$(DEVOBJ)gdevlp8k.$(OBJ) : $(DEVSRC)gdevlp8k.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevlp8k.$(OBJ) $(C_) $(DEVSRC)gdevlp8k.c + +### -------------- The C.Itoh M8510 printer device --------------------- ### +### Note: this driver was contributed by a user: please contact Bob ### +### Smith <bob@snuffy.penfield.ny.us> if you have questions. ### + +m8510_=$(DEVOBJ)gdev8510.$(OBJ) +$(DD)m8510.dev : $(m8510_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)m8510 $(m8510_) + +$(DEVOBJ)gdev8510.$(OBJ) : $(DEVSRC)gdev8510.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdev8510.$(OBJ) $(C_) $(DEVSRC)gdev8510.c + +### -------------- 24pin Dot-matrix printer with 360DPI ---------------- ### +### Note: this driver was contributed by users. Please contact: ### +### Andreas Schwab (schwab@ls5.informatik.uni-dortmund.de) for ### +### questions about the NEC P6; ### +### Christian Felsch (felsch@tu-harburg.d400.de) for ### +### questions about the Epson LQ850. ### + +dm24_=$(DEVOBJ)gdevdm24.$(OBJ) +$(DD)necp6.dev : $(dm24_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)necp6 $(dm24_) + +$(DD)lq850.dev : $(dm24_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lq850 $(dm24_) + +$(DEVOBJ)gdevdm24.$(OBJ) : $(DEVSRC)gdevdm24.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevdm24.$(OBJ) $(C_) $(DEVSRC)gdevdm24.c + +### ----------------- Lexmark 5700 printer ----------------------------- ### +### Note: this driver was contributed by users. Please contact: ### +### Stephen Taylor (setaylor@ma.ultranet.com) if you have questions. ### + +lxm5700m_=$(DEVOBJ)gdevlxm.$(OBJ) +$(DD)lxm5700m.dev : $(lxm5700m_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lxm5700m $(lxm5700m_) + +$(DEVOBJ)gdevlxm.$(OBJ) : $(DEVSRC)gdevlxm.c $(PDEVH) $(gsparams_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevlxm.$(OBJ) $(C_) $(DEVSRC)gdevlxm.c + +### ----------------- The Okidata MicroLine 182 device ----------------- ### +### Note: this driver was contributed by a user: please contact ### +### Maarten Koning (smeg@bnr.ca) if you have questions. ### + +oki182_=$(DEVOBJ)gdevo182.$(OBJ) +$(DD)oki182.dev : $(oki182_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)oki182 $(oki182_) + +$(DEVOBJ)gdevo182.$(OBJ) : $(DEVSRC)gdevo182.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevo182.$(OBJ) $(C_) $(DEVSRC)gdevo182.c + +### ------------- The Okidata IBM compatible printer device ------------ ### +### Note: this driver was contributed by a user: please contact ### +### Charles Mack (chasm@netcom.com) if you have questions. ### + +okiibm_=$(DEVOBJ)gdevokii.$(OBJ) +$(DD)okiibm.dev : $(okiibm_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)okiibm $(okiibm_) + +$(DEVOBJ)gdevokii.$(OBJ) : $(DEVSRC)gdevokii.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevokii.$(OBJ) $(C_) $(DEVSRC)gdevokii.c + +### ------------------ The Epson Stylus Photo devices ------------------ ### +### This driver was contributed by a user: please contact ### +### Zoltan Kocsi (zoltan@bendor.com.au) if you have questions. ### + +photoex_=$(DEVOBJ)gdevphex.$(OBJ) +$(DD)photoex.dev : $(photoex_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)photoex $(photoex_) + +$(DEVOBJ)gdevphex.$(OBJ) : $(DEVSRC)gdevphex.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevphex.$(OBJ) $(C_) $(DEVSRC)gdevphex.c + +### ------------- The Ricoh 4081 laser printer device ------------------ ### +### Note: this driver was contributed by users: ### +### please contact kdw@oasis.icl.co.uk if you have questions. ### + +r4081_=$(DEVOBJ)gdev4081.$(OBJ) +$(DD)r4081.dev : $(r4081_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)r4081 $(r4081_) + + +$(DEVOBJ)gdev4081.$(OBJ) : $(DEVSRC)gdev4081.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdev4081.$(OBJ) $(C_) $(DEVSRC)gdev4081.c + +### -------------------- Sony NWP533 printer device -------------------- ### +### Note: this driver was contributed by a user: please contact Tero ### +### Kivinen (kivinen@joker.cs.hut.fi) if you have questions. ### + +nwp533_=$(DEVOBJ)gdevn533.$(OBJ) +$(DD)nwp533.dev : $(nwp533_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)nwp533 $(nwp533_) + +$(DEVOBJ)gdevn533.$(OBJ) : $(DEVSRC)gdevn533.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevn533.$(OBJ) $(C_) $(DEVSRC)gdevn533.c + +### ----------------- The StarJet SJ48 device -------------------------- ### +### Note: this driver was contributed by a user: if you have questions, ### +### . ### +### please contact Mats Akerblom (f86ma@dd.chalmers.se). ### + +sj48_=$(DEVOBJ)gdevsj48.$(OBJ) +$(DD)sj48.dev : $(sj48_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)sj48 $(sj48_) + +$(DEVOBJ)gdevsj48.$(OBJ) : $(DEVSRC)gdevsj48.c $(PDEVH) + $(DEVCC) $(DEVO_)gdevsj48.$(OBJ) $(C_) $(DEVSRC)gdevsj48.c + +### ----------------- Tektronix 4396d color printer -------------------- ### +### Note: this driver was contributed by a user: please contact ### +### Karl Hakimian (hakimian@haney.eecs.wsu.edu) ### +### if you have questions. ### + +t4693d_=$(DEVOBJ)gdev4693.$(OBJ) +$(DD)t4693d2.dev : $(t4693d_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)t4693d2 $(t4693d_) + +$(DD)t4693d4.dev : $(t4693d_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)t4693d4 $(t4693d_) + +$(DD)t4693d8.dev : $(t4693d_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)t4693d8 $(t4693d_) + +$(DEVOBJ)gdev4693.$(OBJ) : $(DEVSRC)gdev4693.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdev4693.$(OBJ) $(C_) $(DEVSRC)gdev4693.c + +### -------------------- Tektronix ink-jet printers -------------------- ### +### Note: this driver was contributed by a user: please contact ### +### Karsten Spang (spang@nbivax.nbi.dk) if you have questions. ### + +tek4696_=$(DEVOBJ)gdevtknk.$(OBJ) +$(DD)tek4696.dev : $(tek4696_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)tek4696 $(tek4696_) + +$(DEVOBJ)gdevtknk.$(OBJ) : $(DEVSRC)gdevtknk.c $(PDEVH) $(malloc__h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevtknk.$(OBJ) $(C_) $(DEVSRC)gdevtknk.c + +###### ------------------------- Fax devices ------------------------- ###### + +### ------------------------- CAPI fax devices -------------------------- ### +### Note: this driver was contributed by a user: please contact ### +### Peter Schaefer <peter.schaefer@gmx.de> if you have questions. ### + +cfax_=$(DEVOBJ)gdevcfax.$(OBJ) + +$(DD)cfax.dev : $(cfax_) $(DD)fax.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETDEV) $(DD)cfax $(cfax_) + $(ADDMOD) $(DD)cfax -include $(DD)fax + +$(DEVOBJ)gdevcfax.$(OBJ) : $(DEVSRC)gdevcfax.c $(PDEVH)\ + $(gdevfax_h) $(scfx_h) $(strimpl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevcfax.$(OBJ) $(C_) $(DEVSRC)gdevcfax.c + +### ------------------------- The DigiFAX device ------------------------ ### +### This driver outputs images in a format suitable for use with ### +### DigiBoard, Inc.'s DigiFAX software. Use -sDEVICE=dfaxhigh for ### +### high resolution output, -sDEVICE=dfaxlow for normal output. ### +### Note: this driver was contributed by a user: please contact ### +### Rick Richardson (rick@digibd.com) if you have questions. ### + +dfax_=$(DEVOBJ)gdevdfax.$(OBJ) + +$(DD)dfaxlow.dev : $(dfax_) $(DD)tfax.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETDEV) $(DD)dfaxlow $(dfax_) + $(ADDMOD) $(DEVGEN)dfaxlow -include $(DD)tfax + +$(DD)dfaxhigh.dev : $(dfax_) $(DD)tfax.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETDEV) $(DD)dfaxhigh $(dfax_) + $(ADDMOD) $(DEVGEN)dfaxhigh -include $(DD)tfax + +$(DEVOBJ)gdevdfax.$(OBJ) : $(DEVSRC)gdevdfax.c $(PDEVH)\ + $(gdevfax_h) $(gdevtfax_h) $(scfx_h) $(strimpl_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevdfax.$(OBJ) $(C_) $(DEVSRC)gdevdfax.c + +###### --------------------- Raster file formats --------------------- ###### + +### -------------------- The CIF file format for VLSI ------------------ ### +### Note: this driver was contributed by a user: please contact ### +### Frederic Petrot (petrot@masi.ibp.fr) if you have questions. ### + +cif_=$(DEVOBJ)gdevcif.$(OBJ) +$(DD)cif.dev : $(cif_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)cif $(cif_) + +$(DEVOBJ)gdevcif.$(OBJ) : $(DEVSRC)gdevcif.c $(PDEVH) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevcif.$(OBJ) $(C_) $(DEVSRC)gdevcif.c + +### ------------------------- Inferno bitmaps -------------------------- ### +### Note: this driver was contributed by a user: please contact ### +### Russ Cox <rsc@plan9.bell-labs.com> if you have questions. ### + +inferno_=$(DEVOBJ)gdevifno.$(OBJ) +$(DD)inferno.dev : $(inferno_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)inferno $(inferno_) + +$(DEVOBJ)gdevifno.$(OBJ) : $(DEVSRC)gdevifno.c $(PDEVH)\ + $(gsparam_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevifno.$(OBJ) $(C_) $(DEVSRC)gdevifno.c + +### --------------------------- MGR devices ---------------------------- ### +### Note: these drivers were contributed by a user: please contact ### +### Carsten Emde (ce@ceag.ch) if you have questions. ### + +MGR=$(DEVOBJ)gdevmgr.$(OBJ) $(DEVOBJ)gdevpccm.$(OBJ) + +gdevmgr_h=$(DEVSRC)gdevmgr.h + +$(DEVOBJ)gdevmgr.$(OBJ) : $(DEVSRC)gdevmgr.c $(PDEVH)\ + $(gdevmgr_h) $(gdevpccm_h) $(DCONTRIB_MAK) $(MAKEDIRS) + $(DEVCC) $(DEVO_)gdevmgr.$(OBJ) $(C_) $(DEVSRC)gdevmgr.c + +$(DD)mgrmono.dev : $(MGR) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)mgrmono $(MGR) + +$(DD)mgrgray2.dev : $(MGR) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)mgrgray2 $(MGR) + +$(DD)mgrgray4.dev : $(MGR) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)mgrgray4 $(MGR) + +$(DD)mgrgray8.dev : $(MGR) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)mgrgray8 $(MGR) + +$(DD)mgr4.dev : $(MGR) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)mgr4 $(MGR) + +$(DD)mgr8.dev : $(MGR) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)mgr8 $(MGR) + +######################################################################### +### --------------------Japanese printer addons --------------------- ### +######################################################################### + +### These drivers are based on patches on existing device drivers in the +### src/ directory, therefore they are not in addons/ + +$(DD)ljet4pjl.dev : $(HPMONO) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)ljet4pjl $(HPMONO) + +$(DD)lj4dithp.dev : $(cdeskjet_) $(DD)page.dev $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)lj4dithp $(cdeskjet_) + +$(DD)dj505j.dev : $(cdeskjet_) $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)dj505j $(cdeskjet_) + +$(DD)picty180.dev : $(cdeskjet_) $(DCONTRIB_MAK) $(MAKEDIRS) + $(SETPDEV) $(DD)picty180 $(cdeskjet_) + +######################################################################### +# Dependencies: +$(DEVSRC)gdevmeds.h:$(GLSRC)gdevprn.h +$(DEVSRC)gdevmeds.h:$(GLSRC)string_.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsstrtok.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxclthrd.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxclpage.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxclist.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxgstate.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gstrans.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gdevp14.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxline.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsht1.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcomp.h +$(DEVSRC)gdevmeds.h:$(GLSRC)math_.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcolor2.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxpcolor.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxdevmem.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gdevdevn.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gx.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxclipsr.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gdebug.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxdevbuf.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxdcolor.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxband.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxblend.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscolor2.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxmatrix.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxdevice.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcpath.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsht.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsequivc.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxdevcli.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxpcache.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscindex.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcmap.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsptype1.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscie.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxtext.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gstext.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxstate.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsnamecl.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gstparam.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gspcolor.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxfmap.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsmalloc.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsfunc.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcspace.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxctable.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxrplane.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscsel.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxfcache.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsfont.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsimage.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsdcolor.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcvalue.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxbcache.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsropt.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxdda.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxpath.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxiclass.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxfrac.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxtmap.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxftype.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscms.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsrect.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gslparam.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsdevice.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxbitfmt.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscpm.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscspace.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsgstate.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxstdio.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsxfont.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsdsrc.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsio.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsiparam.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxfixed.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxclio.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscompt.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsmatrix.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gspenum.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxhttile.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsparam.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsrefct.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gp.h +$(DEVSRC)gdevmeds.h:$(GLSRC)memento.h +$(DEVSRC)gdevmeds.h:$(GLSRC)memory_.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsutil.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsuid.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsstrl.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsstruct.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gdbflags.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxsync.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gserrors.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxbitmap.h +$(DEVSRC)gdevmeds.h:$(GLSRC)vmsmath.h +$(DEVSRC)gdevmeds.h:$(GLSRC)srdline.h +$(DEVSRC)gdevmeds.h:$(GLSRC)scommon.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsfname.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsbitmap.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsccolor.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxarith.h +$(DEVSRC)gdevmeds.h:$(GLSRC)stat_.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gpsync.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsstype.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsmemory.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gpgetenv.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gscdefs.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gslibctx.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gxcindex.h +$(DEVSRC)gdevmeds.h:$(GLSRC)stdio_.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gsccode.h +$(DEVSRC)gdevmeds.h:$(GLSRC)stdint_.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gssprintf.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gstypes.h +$(DEVSRC)gdevmeds.h:$(GLSRC)std.h +$(DEVSRC)gdevmeds.h:$(GLSRC)stdpre.h +$(DEVSRC)gdevmeds.h:$(GLGEN)arch.h +$(DEVSRC)gdevmeds.h:$(GLSRC)gs_dll_call.h +$(DEVSRC)gdevstc.h:$(GLSRC)gdevprn.h +$(DEVSRC)gdevstc.h:$(GLSRC)string_.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsstrtok.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsstate.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxclthrd.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsovrc.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxclpage.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxclist.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxgstate.h +$(DEVSRC)gdevstc.h:$(GLSRC)gstrans.h +$(DEVSRC)gdevstc.h:$(GLSRC)gdevp14.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxline.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscolor.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsht1.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsline.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcomp.h +$(DEVSRC)gdevstc.h:$(GLSRC)math_.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcolor2.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxpcolor.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxdevmem.h +$(DEVSRC)gdevstc.h:$(GLSRC)gdevdevn.h +$(DEVSRC)gdevstc.h:$(GLSRC)gx.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxclipsr.h +$(DEVSRC)gdevstc.h:$(GLSRC)gdebug.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxdevbuf.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxdcolor.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxband.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxblend.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscolor2.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxmatrix.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxdevice.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcpath.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsht.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsequivc.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxdevcli.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxpcache.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscindex.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcmap.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsptype1.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscie.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxtext.h +$(DEVSRC)gdevstc.h:$(GLSRC)gstext.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxstate.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsnamecl.h +$(DEVSRC)gdevstc.h:$(GLSRC)gstparam.h +$(DEVSRC)gdevstc.h:$(GLSRC)gspcolor.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxfmap.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsmalloc.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsfunc.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcspace.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxctable.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxrplane.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscsel.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxfcache.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsfont.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsimage.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsdcolor.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcvalue.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxbcache.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsropt.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxdda.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxpath.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxiclass.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxfrac.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxtmap.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxftype.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscms.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsrect.h +$(DEVSRC)gdevstc.h:$(GLSRC)gslparam.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsdevice.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxbitfmt.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscpm.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscspace.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsgstate.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxstdio.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsxfont.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsdsrc.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsio.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsiparam.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxfixed.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxclio.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscompt.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsmatrix.h +$(DEVSRC)gdevstc.h:$(GLSRC)gspenum.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxhttile.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsparam.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsrefct.h +$(DEVSRC)gdevstc.h:$(GLSRC)gp.h +$(DEVSRC)gdevstc.h:$(GLSRC)memento.h +$(DEVSRC)gdevstc.h:$(GLSRC)memory_.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsutil.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsuid.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsstrl.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsstruct.h +$(DEVSRC)gdevstc.h:$(GLSRC)gdbflags.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxsync.h +$(DEVSRC)gdevstc.h:$(GLSRC)gserrors.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxbitmap.h +$(DEVSRC)gdevstc.h:$(GLSRC)vmsmath.h +$(DEVSRC)gdevstc.h:$(GLSRC)srdline.h +$(DEVSRC)gdevstc.h:$(GLSRC)scommon.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsfname.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsbitmap.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsccolor.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxarith.h +$(DEVSRC)gdevstc.h:$(GLSRC)stat_.h +$(DEVSRC)gdevstc.h:$(GLSRC)gpsync.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsstype.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsmemory.h +$(DEVSRC)gdevstc.h:$(GLSRC)gpgetenv.h +$(DEVSRC)gdevstc.h:$(GLSRC)gscdefs.h +$(DEVSRC)gdevstc.h:$(GLSRC)gslibctx.h +$(DEVSRC)gdevstc.h:$(GLSRC)gxcindex.h +$(DEVSRC)gdevstc.h:$(GLSRC)stdio_.h +$(DEVSRC)gdevstc.h:$(GLSRC)gsccode.h +$(DEVSRC)gdevstc.h:$(GLSRC)stdint_.h +$(DEVSRC)gdevstc.h:$(GLSRC)gssprintf.h +$(DEVSRC)gdevstc.h:$(GLSRC)gstypes.h +$(DEVSRC)gdevstc.h:$(GLSRC)std.h +$(DEVSRC)gdevstc.h:$(GLSRC)stdpre.h +$(DEVSRC)gdevstc.h:$(GLGEN)arch.h +$(DEVSRC)gdevstc.h:$(GLSRC)gs_dll_call.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxdevcli.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxcmap.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxtext.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gstext.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsnamecl.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gstparam.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxfmap.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsfunc.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxcspace.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxrplane.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gscsel.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxfcache.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsfont.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsimage.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsdcolor.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxcvalue.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxbcache.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsropt.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxdda.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxpath.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxfrac.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxtmap.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxftype.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gscms.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsrect.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gslparam.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsdevice.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gscpm.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gscspace.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsgstate.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsxfont.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsdsrc.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsiparam.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxfixed.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gscompt.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsmatrix.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gspenum.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxhttile.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsparam.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsrefct.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gp.h +$(DEVSRC)gdevmgr.h:$(GLSRC)memento.h +$(DEVSRC)gdevmgr.h:$(GLSRC)memory_.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsuid.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsstruct.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxsync.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxbitmap.h +$(DEVSRC)gdevmgr.h:$(GLSRC)srdline.h +$(DEVSRC)gdevmgr.h:$(GLSRC)scommon.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsbitmap.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsccolor.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxarith.h +$(DEVSRC)gdevmgr.h:$(GLSRC)stat_.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gpsync.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsstype.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsmemory.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gpgetenv.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gscdefs.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gslibctx.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gxcindex.h +$(DEVSRC)gdevmgr.h:$(GLSRC)stdio_.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gsccode.h +$(DEVSRC)gdevmgr.h:$(GLSRC)stdint_.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gssprintf.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gstypes.h +$(DEVSRC)gdevmgr.h:$(GLSRC)std.h +$(DEVSRC)gdevmgr.h:$(GLSRC)stdpre.h +$(DEVSRC)gdevmgr.h:$(GLGEN)arch.h +$(DEVSRC)gdevmgr.h:$(GLSRC)gs_dll_call.h |