path: root/src/gitolite-shell

#!/usr/bin/perl

# gitolite shell, invoked from ~/.ssh/authorized_keys
# ----------------------------------------------------------------------

use FindBin;

BEGIN { $ENV{GL_BINDIR} = $FindBin::RealBin; }
BEGIN { $ENV{GL_LIBDIR} = "$ENV{GL_BINDIR}/lib"; }
use lib $ENV{GL_LIBDIR};

# set HOME
BEGIN { $ENV{HOME} = $ENV{GITOLITE_HTTP_HOME} if $ENV{GITOLITE_HTTP_HOME}; }

use Gitolite::Rc;
use Gitolite::Common;
use Gitolite::Conf::Load;

use strict;
use warnings;

# the main() sub expects ssh-ish things; set them up...
my $id = '';
if ( exists $ENV{G3T_USER} ) {
    $id = in_file();    # file:// masquerading as ssh:// for easy testing
} elsif ( exists $ENV{SSH_CONNECTION} ) {
    $id = in_ssh();
} elsif ( exists $ENV{REQUEST_URI} ) {
    $id = in_http();
} else {
    _die "who the *heck* are you?";
}

# sanity...
my $soc = $ENV{SSH_ORIGINAL_COMMAND};
$soc =~ s/[\n\r]+/<<newline>>/g;
_die "I don't like newlines in the command: '$soc'\n" if $ENV{SSH_ORIGINAL_COMMAND} ne $soc;

# the INPUT trigger massages @ARGV and $ENV{SSH_ORIGINAL_COMMAND} as needed
trigger('INPUT');

main($id);

gl_log('END') if $$ == $ENV{GL_TID};

exit 0;

# ----------------------------------------------------------------------

sub in_file {
    gl_log( 'file', "ARGV=" . join( ",", @ARGV ), "SOC=$ENV{SSH_ORIGINAL_COMMAND}" );

    if ( $ENV{SSH_ORIGINAL_COMMAND} =~ /git-\w+-pack/ ) {
        print STDERR "TRACE: gsh(", join( ")(", @ARGV ), ")\n";
        print STDERR "TRACE: gsh(SOC=$ENV{SSH_ORIGINAL_COMMAND})\n";
    }
    return 'file';
}

sub in_http {
    http_setup_die_handler();

    _die "GITOLITE_HTTP_HOME not set" unless $ENV{GITOLITE_HTTP_HOME};

    _die "fallback to DAV not supported" if $ENV{REQUEST_METHOD} eq 'PROPFIND';

    # fake out SSH_ORIGINAL_COMMAND and SSH_CONNECTION when called via http,
    # so the rest of the code stays the same (except the exec at the end).
    http_simulate_ssh_connection();

    $ENV{REMOTE_USER} ||= $rc{HTTP_ANON_USER};
    @ARGV = ( $ENV{REMOTE_USER} );

    my $ip;
    ( $ip = $ENV{SSH_CONNECTION} || '(no-IP)' ) =~ s/ .*//;

    gl_log( 'http', "ARGV=" . join( ",", @ARGV ), "SOC=" . ( $ENV{SSH_ORIGINAL_COMMAND} || '' ), "FROM=$ip" );

    return 'http';
}

sub in_ssh {
    my $ip;
    ( $ip = $ENV{SSH_CONNECTION} || '(no-IP)' ) =~ s/ .*//;

    gl_log( 'ssh', "ARGV=" . join( ",", @ARGV ), "SOC=" . ( $ENV{SSH_ORIGINAL_COMMAND} || '' ), "FROM=$ip" );

    $ENV{SSH_ORIGINAL_COMMAND} ||= '';

    return $ip;
}

# ----------------------------------------------------------------------

# call this once you are sure arg-1 is the username and SSH_ORIGINAL_COMMAND
# has been setup (even if it's not actually coming via ssh).
sub main {
    my $id = shift;

    # set up the user
    my $user = $ENV{GL_USER} = shift @ARGV;

    # set up the repo and the attempted access
    my ( $verb, $repo ) = parse_soc();    # returns only for git commands
    Gitolite::Conf::Load::sanity($repo, $REPONAME_PATT);
    $ENV{GL_REPO} = $repo;
    my $aa = ( $verb =~ 'upload' ? 'R' : 'W' );

    # set up env vars from options set for this repo
    env_options($repo);

    # auto-create?
    if ( repo_missing($repo) and access( $repo, $user, '^C', 'any' ) !~ /DENIED/ ) {
        require Gitolite::Conf::Store;
        Gitolite::Conf::Store->import;
        new_wild_repo( $repo, $user, $aa );
        gl_log( 'create', $repo, $user, $aa );
    }

    # a ref of 'any' signifies that this is a pre-git check, where we don't
    # yet know the ref that will be eventually pushed (and even that won't
    # apply if it's a read operation).  See the matching code in access() for
    # more information.
    unless ( $ENV{GL_BYPASS_ACCESS_CHECKS} ) {
        my $ret = access( $repo, $user, $aa, 'any' );
        trigger( 'ACCESS_1', $repo, $user, $aa, 'any', $ret );
        _die $ret . "\n(or you mis-spelled the reponame)" if $ret =~ /DENIED/;

        gl_log( "pre_git", $repo, $user, $aa, 'any', $ret );
    }

    trigger( 'PRE_GIT', $repo, $user, $aa, 'any', $verb );
    if ( $ENV{REQUEST_URI} ) {
        _system( "git", "http-backend" );
    } else {
        my $repodir = "'$rc{GL_REPO_BASE}/$repo.git'";
        _system( "git", "shell", "-c", "$verb $repodir" );
    }
    trigger( 'POST_GIT', $repo, $user, $aa, 'any', $verb );
}

# ----------------------------------------------------------------------

sub parse_soc {
    my $soc = $ENV{SSH_ORIGINAL_COMMAND};
    $soc ||= 'info';

    my $git_commands = "git-upload-pack|git-receive-pack|git-upload-archive";
    if ( $soc =~ m(^($git_commands) '/?(.*?)(?:\.git(\d)?)?'$) ) {
        my ( $verb, $repo, $trace_level ) = ( $1, $2, $3 );
        $ENV{D} = $trace_level if $trace_level;
        _die "invalid repo name: '$repo'" if $repo !~ $REPONAME_PATT;
        trace( 2, "git command", $soc );
        return ( $verb, $repo );
    }

    # after this we should not return; caller expects us to handle it all here
    # and exit out

    my @words = split ' ', $soc;
    if ( $rc{COMMANDS}{ $words[0] } ) {
        if ( $rc{COMMANDS}{ $words[0] } ne 'ua' ) {
            _die "suspicious characters loitering about '$soc'" if $soc !~ $REMOTE_COMMAND_PATT;
            _die "no relative paths allowed anywhere!" if $soc =~ m(\.\./);
        }
        trace( 2, "gitolite command", $soc );
        _system( "gitolite", @words );
        exit 0;
    }

    _die "unknown git/gitolite command: '$soc'";
}

# ----------------------------------------------------------------------
# helper functions for "in_http"

sub http_setup_die_handler {

    $SIG{__DIE__} = sub {
        my $service = ( $ENV{SSH_ORIGINAL_COMMAND} =~ /git-receive-pack/ ? 'git-receive-pack' : 'git-upload-pack' );
        my $message = shift; chomp($message);
        print STDERR "$message\n";

        http_print_headers($service);

        # format the service response, then the message.  With initial
        # help from Ilari and then a more detailed email from Shawn...
        $service = "# service=$service\n"; $message = "ERR $message\n";
        $service = sprintf( "%04X", length($service) + 4 ) . "$service";    # no CRLF on this one
        $message = sprintf( "%04X", length($message) + 4 ) . "$message";

        print $service;
        print "0000";                                                       # flush-pkt, apparently
        print $message;
        print STDERR $service;
        print STDERR $message;
        exit 0;                                                             # if it's ok for die_webcgi in git.git/http-backend.c, it's ok for me ;-)
      }
}

sub http_simulate_ssh_connection {
    # these patterns indicate normal git usage; see "services[]" in
    # http-backend.c for how I got that.  Also note that "info" is overloaded;
    # git uses "info/refs...", while gitolite uses "info" or "info?...".  So
    # there's a "/" after info in the list below
    if ( $ENV{PATH_INFO} =~ m(^/(.*)/(HEAD$|info/refs$|objects/|git-(?:upload|receive)-pack$)) ) {
        my $repo = $1;
        my $verb = ( $ENV{REQUEST_URI} =~ /git-receive-pack/ ) ? 'git-receive-pack' : 'git-upload-pack';
        $ENV{SSH_ORIGINAL_COMMAND} = "$verb '$repo'";
    } else {
        # this is one of our custom commands; could be anything really,
        # because of the adc feature
        my ($verb) = ( $ENV{PATH_INFO} =~ m(^/(\S+)) );
        my $args = $ENV{QUERY_STRING};
        $args =~ s/\+/ /g;
        $args =~ s/%([0-9A-Fa-f]{2})/chr(hex($1))/eg;
        $ENV{SSH_ORIGINAL_COMMAND} = $verb;
        $ENV{SSH_ORIGINAL_COMMAND} .= " $args" if $args;
        http_print_headers();    # in preparation for the eventual output!

        # we also need to pipe STDERR out via STDOUT, else the user doesn't see those messages!
        open(STDERR, ">&STDOUT") or _die "Can't dup STDOUT: $!";
    }
    $ENV{SSH_CONNECTION} = "$ENV{REMOTE_ADDR} $ENV{REMOTE_PORT} $ENV{SERVER_ADDR} $ENV{SERVER_PORT}";
}

my $http_headers_printed = 0;

sub http_print_headers {
    my ( $service, $code, $text ) = @_;

    return if $http_headers_printed++;
    $code ||= 200;
    $text ||= "OK - gitolite";

    $|++;
    print "Status: $code $text\r\n";
    print "Expires: Fri, 01 Jan 1980 00:00:00 GMT\r\n";
    print "Pragma: no-cache\r\n";
    print "Cache-Control: no-cache, max-age=0, must-revalidate\r\n";
    if ($service) {
        print "Content-Type: application/x-$service-advertisement\r\n";
    } else {
        print "Content-Type: text/plain\r\n";
    }
    print "\r\n";
}