Get Gentoo!
gentoo.org sites
gentoo.org Wiki Bugs Forums Packages
Planet Archives Sources
Infra Status
aboutsummaryrefslogtreecommitdiff
path: root/sim/ChangeLog
Commit message (Collapse)AuthorAgeFilesLines
* Add 'extern C' if simulator is written in C++Павел Крюков2019-01-031-0/+4
| | | | | | | sim/common/Changelog: 2018-12-31 Pavel I. Kryukov <kryukov@frtk.ru> * sim-base.h: Add 'extern C' if header is compiled with C++
* sim/opcodes: Allow use of out of tree cgen source directoryAndrew Burgess2018-12-061-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When configuring with '--enbale-cgen-maint' the default for both the opcodes/ and sim/ directories is to assume that the cgen source is within the binutils-gdb source tree as binutils-gdb/cgen/. In the old cvs days, this worked well, as cgen was just another sub-module of the single cvs repository and could easily be checked out within the binutils-gdb directory, and managed by cvs in the normal way. Now that binutils-gdb is in git, while cgen is still in cvs, placing the cgen respository within the binutils-gdb tree is more troublesome, and it would be nice if the two tools could be kept separate. Luckily there is already some initial code in the configure.ac files for both opcodes/ and sim/ to support having cgen be located outside of the binutils-gdb tree, however, this was speculative code written imagining a future where cgen would be built and installed to some location. Right now there is no install support for cgen, and so the configure code in opcodes/ and sim/ doesn't really do anything useful. In this commit I repurpose this code to allow binutils-gdb to be configured so that it can make use of a cgen source directory that is outside of the binutils-gdb tree. With this commit applied it is now possible to configure and build binutils-gdb like this: /path/to/binutils-gdb/src/configure --enable-cgen-maint=/path/to/cgen/src/cgen/ make all-opcodes make -C opcodes run-cgen-all Just in case anyone is still using cgen inside the binutils-gdb tree, I have left the default behaviour of '--enable-cgen-maint' (with no parameter) unchanged, that is it looks for the cgen directory as 'binutils-gdb/cgen/'. opcodes/ChangeLog: * configure.ac (enable-cgen-maint): Support passing path to cgen source tree. * configure: Regenerate. sim/ChangeLog: * common/acinclude.m4 (enable-cgen-maint): Support passing path to cgen source tree. * cris/configure: Regenerate. * frv/configure: Regenerate. * iq2000/configure: Regenerate. * lm32/configure: Regenerate. * m32r/configure: Regenerate. * or1k/configure: Regenerate. * sh64/configure: Regenerate.
* or1k: Add the l.muld, l.muldu, l.macu, l.msbu insnsRichard Henderson2018-10-051-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also fix the incorrect definitions of multiply and divide carry and overflow float. Changes to the instructions are made in the .cpu file, then we regenerate the binutils and sim files. The changes also required a few fixups for tests and additional sim helpers. cpu/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1korbis.cpu (insn-opcode-mac): Add opcodes for MACU and MSBU. (insn-opcode-alu-regreg): Add opcodes for MULD and MULDU. (l-mul): Fix overflow support and indentation. (l-mulu): Fix overflow support and indentation. (l-muld, l-muldu, l-msbu, l-macu): New instructions. (l-div); Remove incorrect carry behavior. (l-divu): Fix carry and overflow behavior. (l-mac): Add overflow support. (l-msb, l-msbu): Add carry and overflow support. opcodes/ChangeLog: yyyy-mm-dd Richard Henderson <rth@twiddle.net> Stafford Horne <shorne@gmail.com> * or1k-desc.c: Regenerate. * or1k-desc.h: Regenerate. * or1k-opc.c: Regenerate. * or1k-opc.h: Regenerate. * or1k-opinst.c: Regenerate. sim/common/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * cgen-ops.h (ADDCFDI): New function, add carry flag DI variant. (ADDOFDI): New function, add overflow flag DI variant. (SUBCFDI): New function, subtract carry flag DI variant. (SUBOFDI): New function, subtract overflow flag DI variant. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * or1k/cpu.h: Regenerate. * or1k/decode.c: Regenerate. * or1k/decode.h: Regenerate. * or1k/model.c: Regenerate. * or1k/sem-switch.c: Regenerate. * or1k/sem.c: Regenerate: sim/testsuite/sim/or1k/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * div.S: Fix tests to match correct overflow/carry semantics. * mul.S: Likewise. gas/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * testsuite/gas/or1k/allinsn.s: Add instruction tests for l.muld, l.muldu, l.macu, l.msb, l.msbu. * testsuite/gas/or1k/allinsn.d: Add test results for new instructions.
* Update my e-mail address, limit maintenance to MIPS I-IV ISAsMaciej W. Rozycki2018-07-211-0/+5
| | | | | | | | | | | | | | binutils/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance. gdb/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance. sim/ * MAINTAINERS: Update my e-mail address, downgrade to MIPS I-IV ISA maintenance.
* Remove myself from target-specific MAINTAINERSDJ Delorie2018-07-191-0/+4
| | | | | | | [binutils] * MAINTAINERS (RL78, RX): Remove myself as maintainer. [sim] * MAINTAINERS (rl78, m32c, rx, v850): Remove myself as maintainer.
* sim: Add Stafford Horne as or1k maintainer.Stafford Horne2018-07-141-0/+4
| | | | | | | | | | | | | Since I helped upstream the or1k port I would like to claim myself as maintainer. sim/ChangeLog: yyyy-mm-dd Stafford Horne <shorne@gmail.com> * MAINTAINERS (or1k): Add myself as or1k maintainer. Signed-off-by: Stafford Horne <shorne@gmail.com>
* Bump to autoconf 2.69 and automake 1.15.1Simon Marchi2018-06-191-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When trying to run the update-gnulib.sh script in gdb, I get this: Error: Wrong automake version (Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^ =:+{}]+)}/ at /opt/automake/1.11.1/bin/automake line 4113.), we need 1.11.1. Aborting. Apparently, it's an issue with a regex in automake that triggers a warning starting with Perl 5.22. It has been fixed in automake 1.15.1. So I think it's a good excuse to bump the versions of autoconf and automake used in the gnulib import. And to avoid requiring multiple builds of autoconf/automake, it was suggested that we bump the required version of those tools for all binutils-gdb. For autoconf, the 2.69 version is universally available, so it's an easy choice. For automake, different distros and distro versions have different automake versions. But 1.15.1 seems to be the most readily available as a package. In any case, it's easy to build it from source. I removed the version checks from AUTOMAKE_OPTIONS and AC_PREREQ, because I don't think they are useful in our case. They only specify a lower bound for the acceptable version of automake/autoconf. That's useful if you let the user choose the version of the tool they want to use, but want to set a minimum version (because you use a feature that was introduced in that version). In our case, we force people to use a specific version anyway. For the autoconf version, we have the check in config/override.m4 that enforces the version we want. It will be one less thing to update next time we change autotools version. I hit a few categories of problems that required some changes. They are described below along with the chosen solutions. Problem 1: configure.ac:17: warning: AM_INIT_AUTOMAKE: two- and three-arguments forms are deprecated. For more info, see: configure.ac:17: http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_005fINIT_005fAUTOMAKE-invocation Solution 1: Adjust the code based on the example at that URL. Problem 2 (in zlib/): Makefile.am: error: required file './INSTALL' not found Makefile.am: 'automake --add-missing' can install 'INSTALL' Makefile.am: error: required file './NEWS' not found Makefile.am: error: required file './AUTHORS' not found Makefile.am: error: required file './COPYING' not found Makefile.am: 'automake --add-missing' can install 'COPYING' Solution 2: Add the foreign option to AUTOMAKE_OPTIONS. Problem 3: doc/Makefile.am:20: error: support for Cygnus-style trees has been removed Solution 3: Remove the cygnus options. Problem 4: Makefile.am:656: warning: 'INCLUDES' is the old name for 'AM_CPPFLAGS' (or '*_CPPFLAGS') Solution 4: Rename "INCLUDES = " to "AM_CPPFLAGS += " (because AM_CPPFLAGS is already defined earlier). Problem 5: doc/Makefile.am:71: warning: suffix '.texinfo' for Texinfo files is discouraged; use '.texi' instead doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 5: Rename .texinfo files to .texi. Problem 6: doc/Makefile.am: warning: Oops! doc/Makefile.am: It appears this file (or files included by it) are triggering doc/Makefile.am: an undocumented, soon-to-be-removed automake hack. doc/Makefile.am: Future automake versions will no longer place in the builddir doc/Makefile.am: (rather than in the srcdir) the generated '.info' files that doc/Makefile.am: appear to be cleaned, by e.g. being listed in CLEANFILES or doc/Makefile.am: DISTCLEANFILES. doc/Makefile.am: If you want your '.info' files to be placed in the builddir doc/Makefile.am: rather than in the srcdir, you have to use the shiny new doc/Makefile.am: 'info-in-builddir' automake option. Solution 6: Remove the hack at the bottom of doc/Makefile.am and use the info-in-builddir automake option. Problem 7: doc/Makefile.am:35: error: required file '../texinfo.tex' not found doc/Makefile.am:35: 'automake --add-missing' can install 'texinfo.tex' Solution 7: Use the no-texinfo.tex automake option. We also have one in texinfo/texinfo.tex, not sure if we should point to that, or move it (or a newer version of it added with automake --add-missing) to top-level. Problem 8: Makefile.am:131: warning: source file 'config/tc-aarch64.c' is in a subdirectory, Makefile.am:131: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. Solution 8: Use subdir-objects, that means adjusting references to some .o that will now be in config/. Problem 9: configure.ac:375: warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body ../../lib/autoconf/lang.m4:193: AC_LANG_CONFTEST is expanded from... ../../lib/autoconf/general.m4:2601: _AC_COMPILE_IFELSE is expanded from... ../../lib/autoconf/general.m4:2617: AC_COMPILE_IFELSE is expanded from... ../../lib/m4sugar/m4sh.m4:639: AS_IF is expanded from... ../../lib/autoconf/general.m4:2042: AC_CACHE_VAL is expanded from... ../../lib/autoconf/general.m4:2063: AC_CACHE_CHECK is expanded from... configure.ac:375: the top level Solution 9: Use AC_LANG_SOURCE, or use proper quoting. Problem 10 (in intl/): configure.ac:7: warning: AC_COMPILE_IFELSE was called before AC_USE_SYSTEM_EXTENSIONS /usr/share/aclocal/threadlib.m4:36: gl_THREADLIB_EARLY_BODY is expanded from... /usr/share/aclocal/threadlib.m4:29: gl_THREADLIB_EARLY is expanded from... /usr/share/aclocal/threadlib.m4:318: gl_THREADLIB is expanded from... /usr/share/aclocal/lock.m4:9: gl_LOCK is expanded from... /usr/share/aclocal/intl.m4:211: gt_INTL_SUBDIR_CORE is expanded from... /usr/share/aclocal/intl.m4:25: AM_INTL_SUBDIR is expanded from... /usr/share/aclocal/gettext.m4:57: AM_GNU_GETTEXT is expanded from... configure.ac:7: the top level Solution 10: Add AC_USE_SYSTEM_EXTENSIONS in configure.ac. ChangeLog: * libtool.m4: Use AC_LANG_SOURCE. * configure.ac: Remove AC_PREREQ, use AC_LANG_SOURCE. * README-maintainer-mode: Update version requirements. * ar-lib: New file. * test-driver: New file. * configure: Re-generate. bfd/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. (INCLUDES): Rename to ... (AM_CPPFLAGS): ... this. * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove 1.9, cygnus, add info-in-builddir no-texinfo.tex. (info_TEXINFOS): Rename bfd.texinfo to bfd.texi. * doc/bfd.texinfo: Rename to ... * doc/bfd.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. binutils/ChangeLog: * configure.ac: Remove AC_PREREQ. * doc/Makefile.am (AUTOMAKE_OPTIONS): Remove cygnus, add info-in-builddir no-texinfo.tex. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. config/ChangeLog: * override.m4 (_GCC_AUTOCONF_VERSION): Bump from 2.64 to 2.69. etc/ChangeLog: * configure.in: Remove AC_PREREQ. * configure: Re-generate. gas/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11, add subdir-objects. (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O): Add config/ prefix. * configure.ac (TARG_CPU_O, OBJ_FORMAT_O, ATOF_TARG_O, emfiles, extra_objects): Add config/ prefix. * doc/as.texinfo: Rename to... * doc/as.texi: ... this. * doc/Makefile.am: Rename as.texinfo to as.texi throughout. Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add no-texinfo.tex and info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. * doc/Makefile.in: Re-generate. gdb/ChangeLog: * common/common-defs.h (PACKAGE_NAME, PACKAGE_VERSION, PACKAGE_STRING, PACKAGE_TARNAME): Undefine. * configure.ac: Remove AC_PREREQ, add missing quoting. * gnulib/configure.ac: Modernize usage of AC_INIT/AM_INIT_AUTOMAKE. Remove AC_PREREQ. * gnulib/update-gnulib.sh (AUTOCONF_VERSION): Bump to 2.69. (AUTOMAKE_VERSION): Bump to 1.15.1. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. * gnulib/aclocal.m4: Re-generate. * gnulib/config.in: Re-generate. * gnulib/configure: Re-generate. * gnulib/import/Makefile.in: Re-generate. gdb/gdbserver/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting. * configure: Re-generate. * config.in: Re-generate. * aclocal.m4: Re-generate. gdb/testsuite/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. gold/ChangeLog: * configure.ac: Remove AC_PREREQ, add missing quoting and usage of AC_LANG_SOURCE. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * testsuite/Makefile.in: Re-generate. gprof/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack. (AUTOMAKE_OPTIONS): Remove 1.11, add info-in-builddir. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. * gconfig.in: Re-generate. intl/ChangeLog: * configure.ac: Add AC_USE_SYSTEM_EXTENSIONS, remove AC_PREREQ. * configure: Re-generate. * config.h.in: Re-generate. * aclocal.m4: Re-generate. ld/ChangeLog: * configure.ac: Remove AC_PREREQ. * Makefile.am: Remove DISTCLEANFILES hack, rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. (AUTOMAKE_OPTIONS): Add info-in-builddir. * README: Rename ld.texinfo to ld.texi, ldint.texinfo to ldint.texi throughout. * gen-doc.texi: Likewise. * h8-doc.texi: Likewise. * ld.texinfo: Rename to ... * ld.texi: ... this. * ldint.texinfo: Rename to ... * ldint.texi: ... this. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * config.in: Re-generate. * configure: Re-generate. libdecnumber/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * aclocal.m4. libiberty/ChangeLog: * configure.ac: Remove AC_PREREQ. * configure: Re-generate. * config.in: Re-generate. opcodes/ChangeLog: * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.11. * configure.ac: Remove AC_PREREQ. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate. readline/ChangeLog.gdb: * configure: Re-generate. * examples/rlfe/configure: Re-generate. sim/ChangeLog: * All configure.ac: Remove AC_PREREQ. * All configure: Re-generate. zlib/ChangeLog.bin-gdb: * configure.ac: Modernize AC_INIT call, remove AC_PREREQ. * Makefile.am (AUTOMAKE_OPTIONS): Remove 1.8, cygnus, add foreign. * Makefile.in: Re-generate. * aclocal.m4: Re-generate. * configure: Re-generate.
* MAINTAINERS: Update my company e-mail addressMaciej W. Rozycki2018-01-221-0/+4
| | | | | | | | | | | | | | Following my recent transition from Imagination Technologies to the reincarnated MIPS company update MAINTAINERS entries accordingly. binutils/ * MAINTAINERS: Update my company e-mail address. gdb/ * MAINTAINERS: Update my company e-mail address. sim/ * MAINTAINERS: Update my company e-mail address.
* sim: or1k: add autoconf generated filesStafford Horne2017-12-121-0/+8
| | | | | | | | | | | | | | These are separted out to make the patch easier to read and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure: Regenerated. * or1k/aclocal.m4: Generated. * or1k/config.in: Generated. * or1k/configure: Generated.
* sim: or1k: add cgen generated filesStafford Horne2017-12-121-0/+14
| | | | | | | | | | | | | | | | | | | | | These are the simulator files generated by cgen. These are split out from the main sim patch to make the patch easier to review and smaller. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * or1k/arch.c: Generated. * or1k/arch.h: Generated. * or1k/cpu.c: Generated. * or1k/cpu.h: Generated. * or1k/cpuall.h: Generated. * or1k/decode.c: Generated. * or1k/decode.h: Generated. * or1k/model.c: Generated. * or1k/sem-switch.c: Generated. * or1k/sem.c: Generated.
* sim: or1k: add or1k target to simStafford Horne2017-12-121-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | This adds the OpenRISC 32-bit sim target. The OpenRISC sim is a CGEN based sim so the bulk of the code is generated from the .cpu files by CGEN. The engine decode and execute logic in mloop uses scache with pseudo-basic-block extraction and supports both full and fast (switch) modes. The sim does not implement an mmu at the moment. The sim does implement fpu instructions via the common sim-fpu implementation. sim/ChangeLog: 2017-12-12 Stafford Horne <shorne@gmail.com> Peter Gavin <pgavin@gmail.com> * configure.tgt: Add or1k sim. * or1k/README: New file. * or1k/Makefile.in: New file. * or1k/configure.ac: New file. * or1k/mloop.in: New file. * or1k/or1k-sim.h: New file. * or1k/or1k.c: New file. * or1k/sim-if.c: New file. * or1k/sim-main.h: New file. * or1k/traps.c: New file.
* FT32: support for FT32B processor - part 2/2James Bowman2017-11-011-0/+4
| | | | | | | | | | | | FT32B is a new FT32 family member. This patch adds support for the compressed instructions to gdb and sim. gdb/ChangeLog: * ft32-tdep.c (ft32_fetch_instruction): New function. (ft32_analyze_prologue): Use ft32_fetch_instruction(). sim/ChangeLog: * ft32/interp.c (step_once): Add ft32 shortcode decoder.
* FT32: support for FT32B processor - part 1James Bowman2017-10-121-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FT32B is a new FT32 family member. It has a code compression scheme, which requires the use of linker relaxations. The change is quite large, so submission is in several parts. Part 1 adds a 15-bit instruction field, and CPU-specific functions for the code compression that are used in binutils and GDB. bfd/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-ft32.c: Add HOWTO R_FT32_15. * reloc.c: Add BFD_RELOC_FT32_15. gas/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * config/tc-ft32.c (md_assemble): Replace FT32_FLD_K8 with K15. (md_apply_fix, tc_gen_reloc): Add BFD_RELOC_FT32_15. include/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * elf/ft32.h: Add R_FT32_15. * opcode/ft32.h: Replace FT32_FLD_K8 with K15. (ft32_shortcode, sc_compar, ft32_split_shortcode, ft32_merge_shortcode, ft32_merge_shortcode): New functions. opcodes/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * opcodes/ft32-dis.c (print_insn_ft32): Replace FT32_FLD_K8 with K15. * opcodes/ft32-opc.c (ft32_opc_info): Replace FT32_FLD_K8 with K15. Add jmpix pattern. sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * sim/ft32/interp.c (step_once): Replace FT32_FLD_K8 with K15.
* Add myself as ft32 maintainer for sim.James Bowman2017-10-121-0/+4
| | | | | | | sim/ChangeLog: 2017-10-12 James Bowman <james.bowman@ftdichip.com> * MAINTAINERS (ft32): Add myself.
* Update my email address.Jim Wilson2017-10-031-0/+4
| | | | | sim/ * MAINTAINERS (aarch64): Update my email address.
* Honor an existing CC_FOR_BUILD in the environment for sim.John Baldwin2017-09-061-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This matches the equivalent bits in bfd/acinclude.m4 sim/ChangeLog: * configure.ac: Honor existing CC_FOR_BUILD in environment. * configure: Regenerate. sim/aarch64/ChangeLog: * configure: Regenerate. sim/arm/ChangeLog: * configure: Regenerate. sim/avr/ChangeLog: * configure: Regenerate. sim/bfin/ChangeLog: * configure: Regenerate. sim/common/ChangeLog: * acinclude.m4 (SIM_AC_COMMON) Honor existing CC_FOR_BUILD in environment. sim/cr16/ChangeLog: * configure: Regenerate. sim/cris/ChangeLog: * configure: Regenerate. sim/d10v/ChangeLog: * configure: Regenerate. sim/erc32/ChangeLog: * configure: Regenerate. sim/frv/ChangeLog: * configure: Regenerate. sim/ft32/ChangeLog: * configure: Regenerate. sim/h8300/ChangeLog: * configure: Regenerate. sim/iq2000/ChangeLog: * configure: Regenerate. sim/lm32/ChangeLog: * configure: Regenerate. sim/m32c/ChangeLog: * configure: Regenerate. sim/m32r/ChangeLog: * configure: Regenerate. sim/m68hc11/ChangeLog: * configure: Regenerate. sim/mcore/ChangeLog: * configure: Regenerate. sim/microblaze/ChangeLog: * configure: Regenerate. sim/mips/ChangeLog: * configure: Regenerate. sim/mn10300/ChangeLog: * configure: Regenerate. sim/moxie/ChangeLog: * configure: Regenerate. sim/msp430/ChangeLog: * configure: Regenerate. sim/rl78/ChangeLog: * configure: Regenerate. sim/rx/ChangeLog: * configure: Regenerate. sim/sh/ChangeLog: * configure: Regenerate. sim/sh64/ChangeLog: * configure: Regenerate. sim/v850/ChangeLog: * configure: Regenerate.
* Add self to aarch64 maintainers. Fix mla instruction.Jim Wilson2017-02-141-0/+4
| | | | | | | | | | | sim/ * MAINTAINTERS (aarch64): Add myself. sim/aarch64/ * simulator.c (do_vec_MLA): Rewrite switch body. sim/testsuite/sim/aarch64/ * mla.s: New.
* MAINTAINERS: Add myself as a MIPS maintainerMaciej W. Rozycki2016-12-141-0/+5
| | | | | * MAINTAINERS (Maintainers for particular sims): Add myself as a MIPS maintainer.
* sim: avr: move changelog entries to subdirMike Frysinger2016-10-181-7/+0
|
* Update PC when simulate break instruction.Denis Chertykov2016-07-191-0/+7
| | | | | | | PR target/ 19401 * avr/interp.c (step_once): Pass break instruction address to sim_engine_halt function which writes that to PC. Remove code that follows that function call as it is unreachable.
* Move ChangeLog entries from sim/ChangeLog to sim/sh/ChangeLog.Oleg Endo2016-04-101-5/+0
|
* Adjust default memory size and stack base address for SH simulator.Oleg Endo2016-04-091-0/+5
| | | | | | | | | | ld/ChangeLog: * sh/interp.c (sim_memory_size): Default init to 30. (parse_and_set_memory_size): Adjust upper bound to 31. sim/ChangeLog: * sh/interp.c (sim_memory_size): Default init to 30. (parse_and_set_memory_size): Adjust upper bound to 31.
* MAINTAINERS: Add Thiemo Seufer back, as a past maintainerMaciej W. Rozycki2016-02-031-0/+4
| | | | | | Complement commit 26e0f8dbd817 ("* MAINTAINERS: Remove Thiemo Seufer."). * MAINTAINERS (Past sim maintainers): Add Thiemo Seufer.
* sim: stop configuring common subdirMike Frysinger2016-01-091-0/+7
| | | | | | | Now that cconfig.h doesn't exist, there's no need to build in the common subdir anymore. We leave the configure/Makefile files in there as there is a helper for developers to generate the nltvals.def file. Once that gets cleaned up in the future though, we can drop the build logic too.
* sim: drop common/cconfig.h in favor of a single config.hMike Frysinger2016-01-091-0/+4
| | | | | | | | | | The common subdir sets up a cconfig.h file to hold checks for the common code. In practice, most files still end up using config.h instead which just leads to confusion. Merge all the configure checks that went into cconfig.h into SIM_AC_COMMON so we can drop the cconfig.h file altogether. Now there is only a single config.h file like normal.
* Add myself as the maintainer for the AArch64.Nick Clifton2016-01-051-0/+4
|
* sim: aarch64: drop syscall.h include to fix buildTristan Gingold2016-01-041-0/+4
| | | | | The simulator is including syscall.h which is not standard and apparently not required (builds correctly without it on my machine).
* sim: punt WITH_DEVICES & tconfig.h supportMike Frysinger2015-12-261-0/+4
| | | | | | | | | | | | | No arch is using this anymore, and we want all new ports using the hardware framework instead. Punt WITH_DEVICES and the two callbacks device_io_{read,write}_buffer. We can also punt the tconfig.h file as no port is using it anymore. This fixes in-tree builds that get confused by picking up the wrong one (common/ vs <port>/) caused by commit ae7d0cac8ce971f7108d270c. Any port that needs to set up a global define can use their own sim-main.h file that they must provide regardless.
* sim: aarch64: move ChangeLog contentMike Frysinger2015-12-261-26/+0
|
* Add support for the MRS instruction to the AArch64 simulator.Nick Clifton2015-12-151-0/+8
| | | | | | | | * aarch64/simulator.c (system_get): New function. Provides read access to the dczid system register. (do_mrs): New function - implements the MRS instruction. (dexSystem): Call do_mrs for the MRS instruction. Halt on unimplemented system instructions.
* Add an AArch64 simulator to GDB.Nick Clifton2015-11-241-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | sim * configure.tgt: Add aarch64 entry. * configure: Regenerate. * sim/aarch64/configure.ac: New configure template. * sim/aarch64/aclocal.m4: Generate. * sim/aarch64/config.in: Generate. * sim/aarch64/configure: Generate. * sim/aarch64/cpustate.c: New file - functions for accessing AArch64 registers. * sim/aarch64/cpustate.h: New header. * sim/aarch64/decode.h: New header. * sim/aarch64/interp.c: New file - interface between GDB and simulator. * sim/aarch64/Makefile.in: New makefile template. * sim/aarch64/memory.c: New file - functions for simulating aarch64 memory accesses. * sim/aarch64/memory.h: New header. * sim/aarch64/sim-main.h: New header. * sim/aarch64/simulator.c: New file - aarch64 simulator functions. * sim/aarch64/simulator.h: New header. include/gdb * sim-aarch64.h: New file. sim/test * configure: Regenerate. * sim/aarch64: New directory.
* Remove leading/trailing white spaces in ChangeLogH.J. Lu2015-07-241-17/+17
|
* sim: use AS_HELP_STRING everywhereMike Frysinger2015-06-231-0/+5
| | | | This helps standardize the configure --help output.
* sim: update configure.in->configure.ac docsMike Frysinger2015-06-121-0/+4
| | | | A few places still refer to the configure.in file; update them.
* Regenerate configure in simH.J. Lu2015-04-021-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
* Fix sim buildH.J. Lu2015-04-011-0/+9
| | | | | | | | | * common/Make-common.in (CSEARCH): Remove $(ZLIBINC). (BFD_LIB): Remove $(ZLIB). (CONFIG_LIBS): Add $(ZLIB). * ppc/Makefile.in (ZLIBINC): Removed. (INCLUDES): Remove $(ZLIBINC). (BFD_LIB): Remove $(ZLIB).
* Regenerate configure in simH.J. Lu2015-04-011-0/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * arm/configure: Regenerated. * avr/configure: Likewise. * bfin/configure: Likewise. * common/configure: Likewise. * cr16/configure: Likewise. * cris/configure: Likewise. * d10v/configure: Likewise. * erc32/configure: Likewise. * frv/configure: Likewise. * ft32/configure: Likewise. * h8300/configure: Likewise. * igen/configure: Likewise. * iq2000/configure: Likewise. * lm32/configure: Likewise. * m32c/configure: Likewise. * m32r/configure: Likewise. * m68hc11/configure: Likewise. * mcore/configure: Likewise. * microblaze/configure: Likewise. * mips/configure: Likewise. * mn10300/configure: Likewise. * moxie/configure: Likewise. * msp430/configure: Likewise. * ppc/configure: Likewise. * rl78/configure: Likewise. * rx/configure: Likewise. * sh/configure: Likewise. * sh64/configure: Likewise. * v850/configure: Likewise.
* sim: testsuite: make subdir unconditionalMike Frysinger2015-03-291-0/+6
| | | | | | Since the testsuite subdir has to handle dynamic arch values already, there's no real value in requiring arches to opt in to it. Most have a testsuite now anyways, and we're requiring it in the future.
* sim: avr: start a basic testsuiteMike Frysinger2015-03-281-0/+5
| | | | Just enough to know the sim isn't totally broken.
* sim: ft32: new portJames Bowman2015-03-281-0/+5
| | | | | FT32 is a new high performance 32-bit RISC core developed by FTDI for embedded applications.
* sim: rename tconfig.in to tconfig.hMike Frysinger2015-03-161-0/+5
| | | | | | | | | | | | | Rather than manually include tconfig.h when we think we'll need it (which is error prone as it can define symbols we expect from config.h), have it be included directly by config.h. Since we know we have to include that header everywhere already, this will make sure tconfig.h isn't missed. It should also be fine as tconfig.h is supposed to be simple and only set up a few core defines for the target. This allows us to stop symlinking it in place all the time and just use it straight out of the respective source directory.
* sim: ChangeLog: Correct the related items position and format.Chen Gang2015-02-201-19/+0
| | | | | Move several items from sim/ChangeLog to sim/*/ChangeLog. Also remove the incorrect white space in sim/common/ChangeLog.
* sim: Be sure of calling freeargv() after successfully call buildargv().Chen Gang2015-02-031-0/+5
| | | | | | | | | Or there will be memory leak. 2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com> * microblaze/interp.c (sim_do_command): Call freeargv() before return.
* sim: Be sure of calling freeargv() after successfully call buildargv().Chen Gang2015-02-031-0/+4
| | | | | | | | Or there will be memory leak. 2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com> * mcore/interp.c (sim_do_command): Call freeargv() before return.
* sim: Call freeargv() when failure occursChen Gang2015-02-031-0/+5
| | | | | | | | | | After successfully call buildargv(), the code need to be sure of calling freeargv() in any cases. 2015-02-02 Chen Gang <gang.chen.5i5j@gmail.com> * common/sim-options.c (sim_args_command): Call freeargv() when failure occurs.
* Sim - Use long int format instead of int to avoid compiling warningMichael Eager2014-06-301-0/+5
| | | | | | | 2014-07-01 Chen Gang <gang.chen.5i5j@gmail.com> * sim/microblaze/interp.c: Use long int format instead of int format to avoid compiling warnings.
* Add myself as the maintainer for the MSP430 sim.Nick Clifton2014-03-121-0/+4
|
* sim: msp430: start a test frameworkMike Frysinger2014-03-101-0/+5
| | | | | The current sim lacks any sort of tests. Start a basic framework and add a simple one to test the add insn.
* remove VA_* macros from simTom Tromey2014-01-071-0/+6
| | | | | | | | | | Remove the obsolete VA_* macros from sim. 2014-01-06 Tom Tromey <tromey@redhat.com> * common/cgen-trace.c: Don't use old VA_* macros. * common/sim-load.c (xprintf): Likewise. * common/sim-trace.c (trace_printf, debug_printf): Likewise.
* remove PARAMS from simTom Tromey2014-01-071-0/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This removes the last uses of PARAMS from sim. 2014-01-06 Tom Tromey <tromey@redhat.com> * README-HACKING: Don't use PARAMS. * arm/wrapper.c: Don't use PARAMS. * bfin/sim-main.h: Don't use PARAMS. * common/callback.c: Don't use PARAMS. * common/cgen-trace.c: Don't use PARAMS. * common/run-sim.h: Don't use PARAMS. * common/run.c: Don't use PARAMS. * common/sim-base.h: Don't use PARAMS. * common/sim-load.c: Don't use PARAMS. * common/sim-options.h: Don't use PARAMS. * common/sim-trace.c: Don't use PARAMS. * common/sim-trace.h: Don't use PARAMS. * common/sim-utils.h: Don't use PARAMS. * cr16/cr16_sim.h: Don't use PARAMS. * cr16/gencode.c: Don't use PARAMS. * cr16/interp.c: Don't use PARAMS. * cr16/simops.c: Don't use PARAMS. * d10v/d10v_sim.h: Don't use PARAMS. * d10v/gencode.c: Don't use PARAMS. * d10v/interp.c: Don't use PARAMS. * d10v/simops.c: Don't use PARAMS. * erc32/erc32.c: Don't use PARAMS. * erc32/exec.c: Don't use PARAMS. * erc32/float.c: Don't use PARAMS. * erc32/func.c: Don't use PARAMS. * erc32/sis.c: Don't use PARAMS. * erc32/sis.h: Don't use PARAMS. * mips/interp.c: Don't use PARAMS. * mips/sim-main.h: Don't use PARAMS. * sh/interp.c: Don't use PARAMS. * v850/sim-main.h: Don't use PARAMS. * v850/v850_sim.h: Don't use PARAMS.